Lancia Musa 2009 Owner handbook (in English)

130
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
Go to a Lancia Dealership as
soon as possible if the warn-
ing light
Udoes not light up
when the key is turned to
MAR or if, during car travel, the
warning light comes on either steady
or blinking (along with a message on
the display). The operation of the
warning light
Umay be checked by
the traffic police using specific de-
vices. Follow the laws in force in the
country where you are driving.
FRONT PASSENGER
AIRBAG DISABLED
(amber)
The warning light“comes
on when the front passenger’s airbag
is disabled.
With the front passenger’s airbag on,
when the ignition key is moved to
MAR, the warning light “comes on
steadily for about 4 seconds; then, it
continues to flash for 4 seconds and
finally goes off.
“
When the warning light
comes on, “it indicates
that a light failure has occurred
¬.
In addition, the airbag system auto-
matically disables the airbag on the
passenger’s side (both front and side
airbags, where provided). Contact
Lancia Dealership immediately to
have the system checked.
WARNING
ABS SYSTEM FAILURE
(amber)
When the ignition key is
moved to MAR, the warning
light turns on and should go off after
a few seconds.
The warning light lights up when the
system is either not working or not
available. In this case, the braking
system preserves its efficiency unal-
tered without, however, offering the
extra operating capacity of the ABS
system. Drive carefully and go to a
Lancia Dealership as soon as possible.
The display will show the dedicated
message.
>
FUEL RESERVE (amber)
When the ignition key is
moved to MAR, the warn-
ing light turns on and should
go off after a few seconds.
The warning light turns on when
about 6 to 7 litres of fuel are left in
the tank.
IMPORTANT The warning light
flashes to indicate a system failure. Go
to a Lancia Dealership to have the
system checked.
K
125-134 MUSA 1ed GB 10-07-2008 9:38 Pagina 130

131
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
GLOW PLUG HEATING
(Multijet versions -
amber)
GLOW PLUG HEATING
FAILURE
(Multijet versions - amber)
Glow plug heating
The warning light goes on when the
key is turned to MAR. It goes out as
soon as the glow plugs have reached
the preset temperature. Start the en-
gine as soon as the warning light goes
out.
IMPORTANT At high ambient tem-
peratures the warning light stays on
for an extremely short time.
Glow plug heating failure
The warning light flashes in the event
of a failure in the glow plug heating
system. Go to a Lancia Dealership as
soon as possible.
The display will show the dedicated
message.
m
WATER IN DIESEL
FUEL FILTER (Multijet
versions - amber)
When the ignition key is
moved to MAR, the warning light
turns on and should go off after a few
seconds.
The warning lightcturns on when
there is water in the diesel fuel filter.
The display will show the dedicated
message.
c
The presence of water in the
supply circuit may cause se-
vere damage to the injection
system and irregular engine
operation. If the warning light cgoes
on (with the message on the display
on some versions), go to a Lancia
Dealership as soon as possible to re-
move clogging from the system.
Whenever the warning light comes on
immediately after refuelling, water
may have been introduced in the
tank. In this case, stop the engine im-
mediately and contact a Lancia Deal-
ership.
CAR PROTECTION
SYSTEM FAULT -
LANCIA CODE (amber)
Turning the key to MAR, the
warning light flashes once and then
goes off.
If the warning light stays on with the
ignition key positioned on MAR, a
failure may have occurred (see “Lan-
cia Code system” in section “Dash-
board and controls”).
IMPORTANT Simultaneous turning
on of the warning lights Uand
Yindicates a failure in the Lancia
CODE system.
If the warning light
Yflashes with
the engine running, the car is not pro-
tected by the engine inhibitor device
(see “Lancia Code system” in section
“Dashboard and controls”).
Contact Lancia Dealership to have all
the keys stored.
Y
REAR FOG LIGHTS
(amber)
The warning light comes on
when the fog lights are turned
on.
4
125-134 MUSA 1ed GB 10-07-2008 9:38 Pagina 131

132
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
GENERAL FAILURE
INDICATION
(amber)
The warning light turns on in
the following circumstances.
Externallight failure
The warning light comes on (on some
versions only) when a failure is de-
tected in one of the following lights:
– tail lights
– stop lights (excluding 3
rdstop)
– rear fog lights
– direction indicators
– plate lights.
The fault identified in the lights above
may be due to: one or more burnt
lamps, a blown protection fuse or in-
terruption of the electrical connection.
The display will show the dedicated
message.
è
Fresh air filter clogged
(where provided)
The warning light turns on when the
particulate filter is clogged and the
driving conditions do not enable au-
tomatic activation of the regeneration
procedure.
To allow the regeneration procedure,
keep the car running until the warn-
ing light turns off.
The display will show the dedicated
message.
Engine oil pressure sensor failure
The warning light turns on when a
failure is detected in the engine oil
pressure sensor. Go to a Lancia Deal-
ership as soon as possible.Twilight/rain sensor failure
The warning light turns on when a
failure is detected in the twilight/rain
sensors. Go to a Lancia Dealership as
soon as possible.
The display will show the dedicated
message.
Fuel cut-off switch tripped
The warning light comes on when the
fuel cut-off switch trips.
The display will show the dedicated
message.
Speed limit exceeded
The display shows the dedicated mes-
sage when the car exceeds the set
speed limit (see “Multifunction Dis-
play” in section “Dashboard and con-
trols”).
125-134 MUSA 1ed GB 10-07-2008 9:38 Pagina 132

133
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
BRAKE PAD WEAR
(amber)
The warning light goes on if
the front brake pads are
worn. In this case replace them as
soon as possible.
The display will show the dedicated
message.
d
PARTICULATE FILTER
CLOGGED
(1.3 Multijet
90 HP version) (amber)
When the ignition key is moved to
MAR, the warning light turns on and
should go off after a few seconds.
The warning light turns on when the
particulate filter is clogged and the
driving conditions do not enable au-
tomatic activation of the regeneration
procedure.
To allow the regeneration procedure,
keep the car running until the warn-
ing light turns off.
The display will show the dedicated
message.
h
SIDE/TAIL LIGHTS
AND LOW BEAMS
(green)
FOLLOW ME HOME (green)
Side/tail lights and low beams
The warning light comes on when
side/tail lights or low beams are
turned on.
Follow me home
The warning light turns on when this
device is active (see “Follow me
home” in section “Dashboard and
controls”).
The display will show the dedicated
message.
3
FRONT FOG LIGHTS
(green)
The warning light comes on
when the front fog lights are
turned on.
5
125-134 MUSA 1ed GB 10-07-2008 9:38 Pagina 133

134
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
LEFT-HAND
DIRECTION INDICATOR
(green - intermittent)
The warning light turns on
when the direction indicator control
lever is moved downwards or, to-
gether with the right indicator, when
the hazard light button is pressed.
F
RIGHT-HAND
DIRECTION INDICATOR
(green - intermittent)
The warning light turns on
when the direction indicator control
lever is moved upwards or, together
with the left indicator, when the haz-
ard light button is pressed.
D
“DUALDRIVE”
ELECTRIC POWER
STEERING
ACTIVATION
(symbol on display)
The “CITY” indication appears on the
display when the “Dual drive” electric
power steering system is activated by
pressing the relevant control button.
Pressing the button again causes the
“CITY” indication to go off.
CITY
CRUISE CONTROL
SYSTEM (where
provided) (green)
When the ignition key is
moved to MAR, the warning light
turns on and should go off after a few
seconds.
The warning light is lit on the display
by rotating the Cruise Control to ON.
The display will show the dedicated
message.
Ü
MAIN BEAMS (blue)
The warning light comes on
when the main beams are
turned on.
1
POSSIBLE ICE ON ROAD
When the external temperature
reaches or drops below 3°C, and ice
may be present on the road, the dis-
play shows the symbol
❄, a warning
message appears and the temperature
value flashes.
LIMITED RANGE
The display shows a dedicated mes-
sage to inform the driver that the car
range has dropped below 50 Km (or
30 miles), or the fuel level is inferior
to 4 litres.
125-134 MUSA 1ed GB 10-07-2008 9:38 Pagina 134

135
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
IN AN EMERGENCY
OPENING/CLOSING OF DOORS...................... 136
ENGINE STARTING .......................................... 136
QUICK TYRE REPAIR KIT
FIX & GO automatic......................................... 138
REPLACING A WHEEL.................................... 142
WHEN NEEDING TO CHANGE A BULB ......... 147
IF AN EXTERIOR LIGHT BURNS OUT ............ 150
IF AN INTERIOR LIGHT BURNS OUT............. 155
IF A FUSE BLOWS............................................ 156
IF THE BATTERY IS FLAT .............................. 162
LIFTING THE CAR........................................... 162
TOWING THE CAR........................................... 163
135-164 MUSA 1ed GB 10-07-2008 9:38 Pagina 135

136
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
OPENING/
CLOSING OF
DOORS
Emergency device for locking doors
from the outside
The doors are fitted with an emer-
gency device so that they can be
closed using a lock in the event of a
current failure.
In this case, to close the doors of the
car, proceed as follows:
❒fit the ignition key into the revolv-
ing plug B-fig. 1.
❒turn it to 1and close the door.
fig. 1L0D0247m
STARTING
THE ENGINE
STARTING WITH AN AUXILIARY
BATTERY
If the battery is lat, the engine may be
started using an auxiliary battery with
the same capacity or a little higher
than the flat one.
Proceed as follows:
❒connect the positive terminals (+
sign near the terminal) of the two
batteries using an appropriate ca-
ble; To re-open the door, proceed as fol-
lows:
❒fit the ignition key in the revolving
plug of the lock on the driver’s side
and turn it anticlockwise
❒open the door on the driver side
❒from the inside of the car, open the
remaining doors by lifting the re-
spective levers on the door han-
dles.
135-164 MUSA 1ed GB 10-07-2008 9:38 Pagina 136

WARNING
137
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
❒using a second cable connect the
negative terminal (–) of the auxil-
iary battery to the ground E
on the
engine or on the gearbox of the car
to be started;
❒Start the engine;
❒when the engine has been started,
remove the leads reversing the or-
der above.
If after various attempts the engine
does not start, do not persist in vain.
Contact a Lancia Dealership.
IMPORTANT Do not connect the neg-
ative terminals of the two batteries di-
rectly: sparks could ignite explosive
gas released from the battery. If the
auxiliary battery is installed on an-
other car, prevent accidental contact
between metallic parts of the two cars.Never use a quick battery
charger for the emergency
start: this could damage the
electronic systems and the
engine fuel feed and ignition control
units.
This starting procedure
must be carried out by expert per-
sonnel as incorrect manoeuvres can
cause electric discharges of consid-
erable intensity. Furthermore, bat-
tery fluid is poisonous and corrosive:
avoid contact with your skin and
eyes. Keep naked flames away from
the battery. No smoking. Do not
cause sparks.
fig. 2L0D0396m
135-164 MUSA 1ed GB 10-07-2008 9:38 Pagina 137

138
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
Indicate that the car is sta-
tionary according to the laws
in force: emergency lights, refracting
warning triangle, etc. Passengers
should leave the car, particularly if it
is very loaded and wait for the wheel
to be changed away from on-coming
traffic. In case of steep slopes or
rough slopes, place wedges or other
materials suitable to stop the vehicle
under the wheels.
WARNINGQUICK TYRE
REPAIR KIT FIX
& GO automatic
(if provided for)
The quick tyre repair kit Fix & Go
automaticfig. 3is placed in the boot.
The kit includes:
❒cylinderAcontaining sealing liq-
uid and fitted with:
– filling pipe B;
– adhesive label Cbearing the
words “max. 80 km/h”, to be at-
tached in a position easily visi-
ble to the driver (on the dash-
board) after tyre repair;
❒informative leaflet fig. 4, used to
ensure the correct use of the quick
tyre repair kit and then given to
the personnel who will handle the
treated tyre; BUMP STARTING
Never jump start the engine by push-
ing, towing or driving downhill. This
could cause a flow of fuel into the cat-
alytic converter and damage it beyond
repair.
IMPORTANT Remember that the
brake booster and the power steering
system are not operating until the en-
gine is started, a greater effort will
therefore be required to press the
brake pedal or turn the steering
wheel.
135-164 MUSA 1ed GB 10-07-2008 9:38 Pagina 138

139
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
fig. 3L0D0361m
fig. 4L0D0362m
❒a compressor Dcomplete with
pressure gauge and fittings, lo-
cated in the space;
❒a pair of protective gloves located
in the side space of the compres-
sor;
❒adaptors for the inflation of vari-
ous elements.
The kit container (placed in the boot
under the carpet) also holds the
screwdriver and the tow hitch.
Give the instruction booklet
to the tyre repair workshop
personnel.
WARNING
IMPORTANT Do not use the Fix &
Go if the tyre was damaged by run-
ning on a flat.
IMPORTANT INFORMATION:
The sealing fluid of the quick tyre re-
pair kit is effective with external tem-
peratures between –20 °C and +50 °C.
The sealing fluid will expire.
The kit cannot be used to
repair damage to the tyre
sidewall. Do not use the quick repair
kit if the tyre was damaged by run-
ning on a flat.
The damage cannot be repaired with
the kit if the wheel rim is damaged
(deformation of the channel causing
leakage of air). Do not remove the
foreign body (screw or nail) from
the tyre.
Do not operate the compressor for
longer than 20 consecutive minutes.
Risk of overheating. The quick re-
pair kit is not suitable for definitive
repairs. The tyres may only be re-
paired temporarily.
WARNING
Should any tyre get punc-
tured due to foreign bodies,
you can repair it if the dam-
age doesn’t exceed 4 mm on
the tread and on the shoulder of the
tyre.
Replace the cylinder contain-
ing the expired sealing fluid.
Dispose of the cylinder and
the sealant liquid properly.
Dispose of according to the national
and local laws in force.
135-164 MUSA 1ed GB 10-07-2008 9:38 Pagina 139