fuel pump LAND ROVER DISCOVERY 2002 Workshop Manual
[x] Cancel search | Manufacturer: LAND ROVER, Model Year: 2002, Model line: DISCOVERY, Model: LAND ROVER DISCOVERY 2002Pages: 1672, PDF Size: 46.1 MB
Page 9 of 1672
CONTENTS
6CONTENTS
EGR systems .................................................................................................................................. 17-1-10
REPAIRS
Modulator - EGR ........................................................................................................................... 17-1-13
Inlet Throttle (ILT) Modulator .......................................................................................................... 17-1-13
Valve - EGR - Pre EU3 models ...................................................................................................... 17-1-14
Valve - EGR - EU3 models ............................................................................................................. 17-1-15
EMISSION CONTROL - V8 ....................................................................... 17-2-1
DESCRIPTION AND OPERATION
Crankcase emission control system ............................................................................................... 17-2-1
Exhaust emission control ................................................................................................................ 17-2-2
Evaporative emission system component layout ............................................................................ 17-2-3
Evaporative emission system (with positive pressure leak detection) component layout (NAS only) 17-2-4
Evaporative emission system control diagram ............................................................................... 17-2-5
Secondary air injection system component layout.......................................................................... 17-2-6
Secondary air injection system control diagram ............................................................................. 17-2-8
Emission Control Systems .............................................................................................................. 17-2-9
Crankcase emission control system ............................................................................................... 17-2-9
Exhaust emission control system ................................................................................................... 17-2-10
Evaporative emission control system ............................................................................................. 17-2-15
Secondary air injection system ....................................................................................................... 17-2-26
Crankcase emission control operation............................................................................................ 17-2-33
Exhaust emission control operation ................................................................................................ 17-2-34
Evaporative emission control operation .......................................................................................... 17-2-38
Secondary air injection system ....................................................................................................... 17-2-42
REPAIRS
Canister - EVAP ............................................................................................................................ 17-2-43
Canister - EVAP - Models with Fuel Leak Detection Pump - up to 03MY ...................................... 17-2-43
Canister - EVAP - Models with Fuel Leak Detection Pump - from 03MY ....................................... 17-2-44
Valve - purge control ..................................................................................................................... 17-2-46
Solenoid - evap canister vent solenoid (CVS) valve ..................................................................... 17-2-46
Sensor - heated oxygen (HO2S) - pre-catalytic converter .............................................................. 17-2-47
Sensor - heated oxygen (HO2S) - post-catalytic converter ............................................................ 17-2-48
Control Valve - Secondary Air Injection (SAI) ............................................................................... 17-2-49
Reservoir - Vacuum - Secondary Air Injection (SAI) - up to 03MY ................................................. 17-2-49
Reservoir - vacuum - Secondary Air Injection (SAI) - from 03MY .................................................. 17-2-50
Pump - Air - Secondary Air Injection (SAI) ..................................................................................... 17-2-50
Air Manifold - LH - Secondary Air Injection (SAI) ........................................................................... 17-2-51
Air Manifold - RH - Secondary Air Injection (SAI) .......................................................................... 17-2-51
Solenoid - Vacuum - Secondary Air Injection (SAI) ...................................................................... 17-2-52
Pipe - Secondary Air Injection (SAI) .............................................................................................. 17-2-52
Pump - Fuel Leak Detection - up to 03MY...................................................................................... 17-2-54
Pump - fuel leak detection - from 03MY ......................................................................................... 17-2-54
Filter - fuel leak detection pump - up to 03MY ................................................................................ 17-2-55
Filter - fuel leak detection pump - from 03MY ................................................................................. 17-2-55
ENGINE MANAGEMENT SYSTEM - Td5 ................................................ 18-1-1
DESCRIPTION AND OPERATION
Engine management component location - passenger compartment ............................................ 18-1-2
Engine management component location - engine compartment .................................................. 18-1-3
Engine management block diagram ............................................................................................... 18-1-4
Description ...................................................................................................................................... 18-1-6
Page 11 of 1672
CONTENTS
8CONTENTS
Knock sensor (KS) .......................................................................................................................... 18-2-76
Air cleaner assembly .................................................................................................................... 18-2-77
Element - air filter .......................................................................................................................... 18-2-78
Cable - throttle ................................................................................................................................ 18-2-78
Sensor - Mass Air Flow (MAF) ...................................................................................................... 18-2-79
Throttle Body .................................................................................................................................. 18-2-80
Plenum chamber............................................................................................................................. 18-2-81
Sensor - throttle position (TP) ....................................................................................................... 18-2-82
Valve - idle air control (IACV) ....................................................................................................... 18-2-82
Injectors ......................................................................................................................................... 18-2-83
Actuator - cruise control ................................................................................................................ 18-2-84
Vacuum control unit - up to 03MY .................................................................................................. 18-2-85
Vacuum control unit - from 03MY ................................................................................................... 18-2-85
Cable - cruise control ..................................................................................................................... 18-2-86
Switch - cruise control (on/off) ........................................................................................................ 18-2-87
Switch - cruise control (set/resume) .............................................................................................. 18-2-87
Switch - clutch pedal - cruise control ............................................................................................ 18-2-88
ECU - Cruise control ..................................................................................................................... 18-2-88
FUEL DELIVERY SYSTEM - Td5 ............................................................. 19-1-1
DESCRIPTION AND OPERATION
Fuel delivery system component location ....................................................................................... 19-1-1
Fuel tank and breather components ............................................................................................... 19-1-2
Description ...................................................................................................................................... 19-1-3
Operation ........................................................................................................................................ 19-1-11
ADJUSTMENTS
Fuel system purging ....................................................................................................................... 19-1-13
Fuel tank - drain .............................................................................................................................. 19-1-13
REPAIRS
Switch - inertia - fuel cut-off ............................................................................................................ 19-1-15
Pump - fuel .................................................................................................................................... 19-1-15
Tank - fuel ..................................................................................................................................... 19-1-17
Solenoid - fuel filler flap release .................................................................................................... 19-1-18
Switch - fuel filler flap release - up to 03MY ................................................................................... 19-1-18
Switch - fuel filler flap release - from 03MY .................................................................................... 19-1-19
FUEL DELIVERY SYSTEM - V8 ............................................................... 19-2-1
DESCRIPTION AND OPERATION
Fuel delivery system ....................................................................................................................... 19-2-1
Fuel tank and breather components (all except NAS) .................................................................... 19-2-2
Fuel tank and breather components (NAS) .................................................................................... 19-2-3
Description ...................................................................................................................................... 19-2-4
Operation ........................................................................................................................................ 19-2-10
ADJUSTMENTS
Fuel tank - drain .............................................................................................................................. 19-2-11
REPAIRS
Switch - inertia - fuel cut-off ............................................................................................................ 19-2-13
Pump - fuel .................................................................................................................................... 19-2-13
Tank - fuel ...................................................................................................................................... 19-2-15
Filler tube - fuel ............................................................................................................................. 19-2-16
Page 12 of 1672
CONTENTS
CONTENTS 9
Solenoid - fuel filler flap release ...................................................................................................... 19-2-17
Switch - fuel filler flap release - up to 03MY .................................................................................... 19-2-17
Switch - fuel filler flap release - from 03MY..................................................................................... 19-2-18
COOLING SYSTEM - Td5 ........................................................................ 26-1-1
DESCRIPTION AND OPERATION
Cooling system component layout .................................................................................................. 26-1-2
Cooling system coolant flow ........................................................................................................... 26-1-4
Description ...................................................................................................................................... 26-1-5
Operation ........................................................................................................................................ 26-1-10
ADJUSTMENTS
Drain and refill ................................................................................................................................ 26-1-13
REPAIRS
Fan - viscous .................................................................................................................................. 26-1-15
Radiator ......................................................................................................................................... 26-1-15
Thermostat ..................................................................................................................................... 26-1-17
Pump - coolant ............................................................................................................................... 26-1-18
COOLING SYSTEM - V8 .......................................................................... 26-2-1
DESCRIPTION AND OPERATION
Cooling system component layout .................................................................................................. 26-2-2
Cooling system coolant flow ........................................................................................................... 26-2-4
Description ...................................................................................................................................... 26-2-6
Operation ........................................................................................................................................ 26-2-10
ADJUSTMENTS
Drain and refill ................................................................................................................................. 26-2-13
REPAIRS
Fan - viscous................................................................................................................................... 26-2-15
Radiator ......................................................................................................................................... 26-2-15
Thermostat ...................................................................................................................................... 26-2-18
Gasket - coolant pump .................................................................................................................. 26-2-18
MANIFOLDS AND EXHAUST SYSTEMS - Td5 ...................................... 30-1-1
DESCRIPTION AND OPERATION
Manifold component layout ............................................................................................................. 30-1-1
Exhaust system component layout ................................................................................................. 30-1-2
Description ...................................................................................................................................... 30-1-3
REPAIRS
Pipe - front ..................................................................................................................................... 30-1-5
Gasket - inlet manifold ................................................................................................................... 30-1-6
Gasket - exhaust manifold ............................................................................................................. 30-1-8
Page 32 of 1672
INTRODUCTION
01-3
Abbreviations and Symbols
A Amperes
AAP Ambient Air Pressure
AAT Ambient Air Temperature
ABDC After Bottom Dead Centre
ABS Anti-Lock Brake System
ABS / TC Anti-lock Brake System / Traction
Control
ac Alternating current
A/C Air Conditioning
ACE Active Cornering Enhancement
ACEA Association of Constructors of
European Automobiles
AFR Air Fuel Ratio
AP Ambient Pressure
ASC Anti-shunt Control
ATC Air Temperature Control
ATDC After Top Dead Centre
AUX Auxiliary
AVC Automatic Volume Control
BBDC Before Bottom Dead Centre
BBUS Battery Backed Up Sounder
BCU Body Control Unit
BDC Bottom Dead Centre
bhp Brake Horse Power
BP Boost Pressure
BPP Brake Pedal Position
BS British Standard
BTDC Before Top Dead Centre
BWD Backward
C Celsius
CAN Controller Area Network
CD Compact Disc
CDC Centre Differential Control
CDL Central Door Locking
CD - ROM Compact Disc - Read Only
Memory
CFC Chlorofluorocarbon
CHMSL Centre High Mounted Stop Lamp
CKP Crankshaft Position
CLV Calculated Load Value
cm Centimetre
cm
2Square centimetre
cm3Cubic centimetre
CMP Camshaft Position
CPP Clutch Pedal Position
CO Carbon Monoxide
CO
2Carbon Dioxide
COB Clear Over Base
CR Common Rail
CVS Canister Vent Solenoid
dB Decibels
DDM Driver's Door Module
deg. Degree, angle or temperature
DI Direct Injection
dia. DiameterDIN Deutsche Industrie Normen
(German Industrial Standards)
dc Direct current
DCV Directional Control Valve
DOHC Double Overhead Camshaft
DSP Digital Signal Processing
DTI Dial Test Indicator
DMF Dual Mass Flywheel
DVD Digital Versatile Disc
EACV Electronic Air Control Valve
EAT Electronic Automatic
Transmission
EBD Electronic Brake pressure
Distribution
ECD European Community Directive
ECM Engine Control Module
ECT Engine Coolant Temperature
ECU Electronic Control Unit
EDC Electronic Diesel Control
EEPROM Electronic Erasable
Programmable Read Only
Memory
EGR Exhaust Gas Recirculation
EKA Emergency Key Access
ELR Emergency Locking Retractor
EN European Norm
EOBD European On Board Diagnostics
EON Enhanced Other Network
ERL Electrical Reference Library
ETC Electronic Traction Control
EUI Electronic Unit Injector
EVAP Evaporative Emission
EVR Electronic Vacuum Regulator
F Fahrenheit
ft. Feet
FBH Fuel Burning Heater
FET Field Effect Transistor
FIP Fuel Injection Pump
FTC Fast Throttle Control
FWD Forward
> Greater than
g Gramme or Gravity
gal. Gallons
GMT Greenwich Mean Time
GPS Global Positioning System
hHour
hc High compression
HC Hydro Carbons
HDC Hill Descent Control
HDOP Height Dilation Of Precision
HDPE High Density Polyethylene
HFS Heated Front Screen
Hg Mercury
HO
2S Heated Oxygen Sensor
HMW High Molecular Weight
Page 68 of 1672
GENERAL DATA
04-5
Idle speed:
All loads off 660 ± 50 rev/min
Base idle speed Non-adjustable
Idle air control (IAC) valve position Checked via TestBook
CO at idle:
Catalyst vehicles 0.5 %
Non-catalyst vehicles 0.5 - 1.0 %
Valve timing
Inlet valves:
Opens 28° BTDC
Closes 77° ABDC
Exhaust valves:
Opens 66° BBDC
Closes 39° ATDC
Fuel grade:
High compression catalyst vehicles 95 RON minimum unleaded
Low compression catalyst vehicles 91 RON minimum unleaded
Non-catalyst vehicles 97 RON leaded
Lubrication
Type Wet sump, pressure fed
Pump type Crankshaft driven eccentric rotor
Oil filter Disposable canister with full flow by-pass
Pressure at idle - minimum 0.7 bar (10 lbf.in
2)
Pressure at 2000 rev/min (hot) 3.4 bar (50 lbf.in
2)
Relief valve opening pressure 3.4 bar (50 lbf.in
2)
Low oil pressure switch opening pressure 0.24-0.41 bar (3.5-6.0 lbf.in
2)
Crankshaft
Main journal diameter 63.487 - 63.500 mm (2.4995 - 2.520 in)
Crankpin journal diameter 55.500 - 55.513 mm (2.20 - 2.22 in)
End float 0.08 - 0.26 mm (0.003 - 0.010 in)
Maximum ovality 0.040 mm (0.002 in)
Main bearings
Quantity 5
Material Glacier Vandervell / AS 15
Diametrical clearance 0.015 - 0.016 mm (0.00059 - 0.00063 in)
Connecting Rods
Type Horizontally split big-end, plain small end
Distance between centres 155.120 - 155.220 mm (6.1071 - 6.1110 in)
Page 71 of 1672
GENERAL DATA
04-8
Fuel system - Td5
Type Direct injection from pressure regulated supply with cooled return
flow and in-line pressure regulator
Pressure regulator setting 4 bar (58 lbf.in
2)
Pump Electric two stage submersible
Pump output:
Low pressure 30 l/h (6.6 gal/h) (7.93 US gal/h) at 0.5 bar (7.25 lbf.in
2)
High pressure 180 l/h (39.6 gal/h) (47.55 US gal/h) at 4 bar (58 lbf.in
2)
Maximum consumption 30 l/h (6.6 gal/h) (7.93 US gal/h)
Injectors Electronic unit injectors
Injector nominal operating pressure:
Pre EU3 models 1500 bar (21750 lbf.in
2)
EU3 models 1750 bar (25500 lbf.in
2)
Filter In-line canister filter/water separator with water detection
Air cleaner Mann and Hummell P0037
Page 72 of 1672
GENERAL DATA
04-9
Fuel system - V8
Cooling system - Td5
Type Multiport injection from pressure regulated, returnless supply
Pump Electric submersible
Regulated pump output pressure 3.5 bar (50.75 lbf.in
2)
Fuel pump delivery 120 litres/hr (211 pints/hr) (234 US pints/hr)
Filter In-line canister
Air filter Mann and Hummell P0036
Type Pressurised, spill return partial flow, thermostatically controlled
Cooling fans 11 blade axial flow on viscous coupling and 11 blade axial flow
electric
Electric cooling fan switching points:
For A/C system:
On When vehicle speed is 50 mph (80 km/h) or less and ambient
temperature is 28 °C (82 °F) or more
Off When vehicle speed increases to 62.5 mph (100 km/h) or ambient
temperature decreases to 25 °C (77 °F)
For engine cooling during normal running:
On 110 °C (230 °F)
Off 105 °C (221 °F)
For engine cooling at ignition off (to counteract heat
soak):
On If, within 10 seconds of ignition off, engine coolant temperature is
105 °C (221 °F) or more
Off After 10 minutes or if engine coolant temperature decreases to
100 °C (212 °F)
Coolant pump Centrifugal impeller, belt driven from crankshaft
Thermostat Waxstat with pressure relief valve
Thermostat opening temperature:
Initial opening 82 °C (179 °F)
Fully open 96 °C (204 °F)
Expansion tank cap relief valve - system operating
pressure1.4 bar (20.3 lbf.in
2)
Fuel cooler thermostat opening temperature 82°C (179°F)
Page 87 of 1672
TORQUE WRENCH SETTINGS
06-2
Engine Td5
TORQUE DESCRIPTION METRIC IMPERIAL
ACE pump bolts25 Nm (18 lbf.ft)
A/C compressor bolts 25 Nm (18 lbf.ft)
Alternator support bracket to cylinder head bolts 25 Nm (18 lbf.ft)
Alternator/vacuum pump oil feed pipe union 10 Nm (7 lbf.ft)
Camshaft cover to camshaft carrier bolts 10 Nm (7 lbf.ft)
Camshaft sprocket to camshaft bolts 37 Nm (27 lbf.ft)
Centrifuge cover bolts 10 Nm (7 lbf.ft)
Centrifuge oil drain pipe to sump bolts (or nuts) 10 Nm (7 lbf.ft)
Centrifuge to oil drain pipe bolts 10 Nm (7 lbf.ft)
Centrifuge to oil cooler housing bolts 25 Nm (18 lbf.ft)
CKP sensor bolt10 Nm (7 lbf.ft)
Coolant pipe bolt50 Nm (37 lbf.ft)
Connecting rod bolts, then a further 80°20 Nm (15 lbf.ft)
Crankshaft pulley bolt 460 Nm (340 lbf.ft)
Crankshaft pulley TV damper bolts 80 Nm (59 lbf.ft)
Crankshaft rear oil seal housing bolts 10 Nm (7 lbf.ft)
Cylinder head bolts initial tighten 30 Nm (22 lbf.ft)
Cylinder head bolts final tighten, then a further 90°, then a further 180° and finally a
further 45°65 Nm (48 lbf.ft)
Dipstick tube to camshaft carrier bolt 10 Nm (7 lbf.ft)
Drive plate (automatic transmission) to crankshaft bolts 115 Nm (85 lbf.ft)
EGR pipe clamp to cylinder head bolt - if fitted 25 Nm (18 lbf.ft)
EGR pipe Allen screws 10 Nm (7 lbf.ft)
Engine mounting (front) to cylinder block bolts 48 Nm (35 lbf.ft)
Engine mounting (front) to chassis nuts 85 Nm (63 lbf.ft)
Engine mounting bracket (rear, LH & RH) to gearbox bolts 85 Nm (63 lbf.ft)
Engine mounting bracket (rear, LH & RH) nuts 45 Nm (33 lbf.ft)
Flywheel to crankshaft (manual transmission) bolts, then a further 90°40 Nm (30 lbf.ft)
Front crossmember bolts 26 Nm (20 lbf.ft)
Fuel connector block bolts 25 Nm (18 lbf.ft)
Fuel cooler to inlet manifold bolts 25 Nm (18 lbf.ft)
Gearbox housing to engine bolts 50 Nm (37 lbf.ft)
Heater pipe to cylinder head bolts 25 Nm (18 lbf.ft)
Main bearing cap bolts then a further 90°33 Nm (24 lbf.ft)
Oil cooler housing to cylinder block bolts 25 Nm (18 lbf.ft)
Oil cooler pipe clip bolts 10 Nm (7 lbf.ft)
Oil filter adaptor housing to oil cooler housing bolts 25 Nm (18 lbf.ft)
Oil pick-up strainer screws 10 Nm (7 lbf.ft)
Oil pressure switch 15 Nm (11 lbf.ft)
Oil pump drive sprocket bolt 25 Nm (18 lbf.ft)
Oil pump pressure relief valve plug 25 Nm (18 lbf.ft)
Oil pump and stiffener assembly to cylinder block bolts 13 Nm (10 lbf.ft)
Oil sump to cylinder block bolts 25 Nm (18 lbf.ft)
Oil sump to gearbox bell housing bolts 13 Nm (10 lbf.ft)
PAS pump bracket bolts 27 Nm (20 lbf.ft)
PAS pump pulley bolts 27 Nm (20 lbf.ft)
Rocker arm adjusting screw locknuts 16 Nm (12 lbf.ft)
Page 88 of 1672
TORQUE WRENCH SETTINGS
06-3
Rocker shaft bolts 32 Nm (24 lbf. ft)
Timing chain adjustable guide bolt 25 Nm (18 lbf.ft)
Timing chain cover bolts 27 Nm (20 lbf.ft)
Timing chain cover to cylinder block stud 7 Nm (5.2 lbf.ft)
Timing chain fixed guide retaining pin 25 Nm (18 lbf.ft)
Timing chain cover to cylinder head nut and bolt 25 Nm (18 lbf.ft)
Timing chain fixed guide (M6) bolt 10 Nm (7 lbf.ft)
Timing chain fixed guide (M10) bolt 45 Nm (33 lbf.ft)
Timing chain lubrication jet bolt 10 Nm (7 lbf.ft)
Timing chain tensioner 45 Nm (33 lbf.ft)
Torque converter to drive plate (automatic transmission) bolts 50 Nm (37 lbf.ft)
Turbocharger heatshield bolts 10 Nm (7 lbf.ft)
Turbocharger oil feed pipe banjo bolt 25 Nm (18 lbf.ft)
Turbocharger to exhaust manifold nuts 30 Nm (22 lbf.ft)
Vacuum pump oil feed pipe to cylinder head union 10 Nm (7 lbf.ft)
Viscous fan nut45 Nm (33 lbf.ft)
Fuel spill return pipe unions - if fitted 20 Nm (15 lbf.ft)TORQUE DESCRIPTION METRIC IMPERIAL
Page 90 of 1672
TORQUE WRENCH SETTINGS
06-5
Emission control - Td5
Emission control - V8
Engine management system - Td5
TORQUE DESCRIPTION METRIC IMPERIAL
EGR valve pipe Allen screws 10 Nm (7 lbf.ft)
EGR valve to inlet manifold bolts 10 Nm (7 lbf.ft)
EGR intake pipe clip to cylinder head bolts - if fitted 25 Nm (18 lbf.ft)
EGR cooler to cylinder head nut and bolts - if fitted 25 Nm (18 lbf.ft)
TORQUE DESCRIPTION METRIC IMPERIAL
HO
2S Sensors45 Nm (33 lbf.ft)
SAI air manifold union nuts 25 Nm (18 lbf.ft)
Rubber mountings to SAI pump bracket 10 Nm (7 lbf.ft)
SAI control valve to manifold bolts 10 Nm (7 lbf.ft)
SAI pump to bracket nuts 10 Nm (7 lbf.ft)
SAI pump bracket to body bolt 20 Nm (15 lbf.ft)
Vacuum reservoir to mounting bracket bolt 10 Nm (7 lbf.ft)
TORQUE DESCRIPTION METRIC IMPERIAL
ECT sensor15 Nm (11 lbf.ft)
Fuel tank cradle45 Nm (33 lbf.ft)
CKP sensor10 Nm (7 lbf.ft)
MAP and IAT sensor 10 Nm (7 lbf.ft)
Fuel cooler to inlet manifold - upper bolts 25 Nm (18 lbf.ft)
Turbocharger to exhaust manifold 30 Nm (22 lbf.ft)
Turbocharger drain pipe 10 Nm (7 lbf.ft)
Banjo bolt to oil feed pipe 25 Nm (18 lbf.ft)
Fuel temperature sensor 14 Nm (10 lbf.ft)
Pressure regulator 25 Nm (18 lbf.ft)
Glow plugs16 Nm (12 lbf.ft)
EUI clamp bolts32 Nm (24 lbf.ft)
EGR valve to exhaust manifold 10 Nm (7 lbf.ft)
EGR valve to inlet manifold 10 Nm (7 lbf.ft)
EGR clip25 Nm (18 lbf.ft)