Lexus HS250h 2012 Navigation Manual

NAVIGATION SYSTEM: DESTINATION SEARCH
70
1. Push the “MENU” button on the Re-
mote Touch. (See “—Remote Touch”
on page 10.)
2. Select “Destination”.
U0002LS
3. Select “Go Home”.
The screen changes and displays the map
location for home and the route prefer-
ence. (See “Starting route guidance” on
page 89.)
If home has not been registered, a mes-
sage will be displayed and the setting
screen will automatically appear.
To use this function, it is necessary to set
a “Home” address. (To register “Home”,
see page 117.)
INFORMATION
Guidance starts from the current ve-
hicle position to your home if “OK” is
selected even while driving.
1. Push the “MENU” button on the Re-
mote Touch. (See “—Remote Touch”
on page 10.)
2. Select “Destination”.
3. Select any of the preset destination
buttons on the “Destination” screen.
The screen changes and displays the map
location of the preset destination point and
the route preference. (See “Starting route
guidance” on page 89.)
If a preset destination point has not been
registered, a message will be displayed
and the setting screen will automatically
appear.
To use this function, it is necessary to set
“Preset Destinations”. (To register “Preset
Destinations”, see page 119.)
INFORMATION
Guidance starts from the current ve-
hicle position to the preset destina-
tion point if “Go to ” is selected
even while driving.
11 08.03HS250h_NAVI_U
75051U
— Destination search by
Home — Destination search by
Preset destinations

NAVIGATION SYSTEM: DESTINATION SEARCH
71
There are 2 ways to search a destination
by address.
(a) Search by city
(b) Search by street address
1. Push the “MENU” button on the Re-
mote Touch. (See “—Remote Touch”
on page 10.)
2. Select “Destination”.
3. Select “Address” on the “Destina-
tion” screen.
U2006LC
4. Select the button for the desired
method.(a) Selecting a city to search
1. Push the “MENU” button on the Re-
mote Touch, then select “Destination”.
2. Select “Address” on the “Destina-
tion” screen.
U2007LC
3. Select “City”.
U2008LC
4. Input a city name.
U2009LC
5. Select the button of the desired city
name from the displayed list.
11 08.03HS250h_NAVI_U
75051U
— Destination search by
“Address”
2

NAVIGATION SYSTEM: DESTINATION SEARCH
72
U2010LC
6. Input the street name and select
“OK”.
U2011LC
7. When the desired street name is
found, select the corresponding but-
ton.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)
U2012LC
8. Input a house number.
U2013LC
If the same address exists in more than
one city, the current screen changes to the
address list screen.
11 08.03HS250h_NAVI_U
75051U

NAVIGATION SYSTEM: DESTINATION SEARCH
73
SELECTING FROM THE LAST 5 CITIES
U2014LC
1. Select “Last 5 Cities”.
U2015LC
2. Select the button of the desired city
name.
If the navigation system has never been
used, this function will not be available.
The current screen changes to the screen
for inputting a street name. (See “(a) Se-
lecting a city to search” on page 71.)(b) Search by street address
1. Push the “MENU” button on the Re-
mote Touch, then select “Destination”.
2. Select “Address” on the “Destina-
tion” screen.
U2016LC
3. Select “Street Address”.
U2017LC
4. Select numbers directly on the
screen to input a house number.
After inputting a house number, select
“OK”
to display the screen for inputting a
street name.
U2018LC
5. Input the street name and select
“OK”.
11 08.03HS250h_NAVI_U
75051U
2

NAVIGATION SYSTEM: DESTINATION SEARCH
74
U2019LC
6. When the desired street name is
found, select the corresponding but-
ton.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)
If the same address exists in more than
one city, the current screen changes input-
ting the city name or to the address list
screen.
U2020LC
7. Input a city name.
U2021LC
8. Select the button of the desired city
name from the displayed list.
INFORMATION
You can search for a street name us-
ing just the body.
Example : S WESTERN AVE
You can input “S WESTERN AVE”,
“WESTERN AVE” or “WESTERN”
11 08.03HS250h_NAVI_U
75051U

NAVIGATION SYSTEM: DESTINATION SEARCH
75
There are 4 ways to search by Points of In-
terest.
(a) Search by name
(b) Search by category
(c) Search by phone #
(d) Search by eDestination
1. Push the “MENU” button on the Re-
mote Touch. (See “—Remote Touch”
on page 10.)
2. Select “Destination”.
3. Select “Points of Interest” on the
“Destination” screen.
4. Select the button for the desired
method.(a) Search by “Name”
1. Push the “MENU” button on the Re-
mote Touch, then select “Destination”.
2. Select “Point of Interest” on the
“Destination” screen.
3. Select “Name” on the “Point of In-
terest” screen.
U2023LC
4. Input the name of the Point of Inter-
est.
U2024LC
5. Select the button of the desired des-
tination.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 89.)
When inputting the name of a specific
Point of Interest, and there are two or more
sites with the same name, the list screen
is displayed.
INFORMATION
To search for a facility name using
multiple search words, put a space
between each word.
11 08.03HS250h_NAVI_U
75051U
— Destination search by
“Point of Interest”
2

NAVIGATION SYSTEM: DESTINATION SEARCH
76
U2025LC
Select the button of the desired des-
tination.
If the same name exists in more than one
city, a search can be performed more easi-
ly with“City” and“Category” . (See “D
Selecting a city to search” on page 76 and
“D Selecting from the categories” on page
77.)
INFORMATION
The desired Point of Interest can be
displayed on the map screen. (See
“ — Display POI icons” on page 108.)
DSelecting a city to search
U2026LC
1. Select “City”.
U2027LC
2. Input the city name.
U2028LC
3. Select the button of the desired city
name from the displayed list.
INFORMATION
To cancel the city setting, select “Any
City”.
11 08.03HS250h_NAVI_U
75051U

NAVIGATION SYSTEM: DESTINATION SEARCH
77
D
Selecting from the categories
U2029LC
Select “Category”.
U2030LC
If the desired POI category is on the
screen, select the name to display a de-
tailed list of the POI category.
If the desired POI category is not on the
screen, select
“List All Categories” to list
all POI categories.
U2031LCa
When the desired category is selected, the
POI name list screen is displayed. (b) Search by “Category”
The destination can be set by selecting the
search point and the POI category.
1. Push the “MENU” button on the Re-
mote Touch, then select “Destination”.
2. Select “Point of Interest” on the
“Destination” screen.
3. Select “Category” on the “Point of
Interest” screen.
U2032LC
Set the search point by the following
method:
1. Set the search point from near the ve-
hicle’s current position
2. Set the search point from along the chosen route
3. Set the search point from near a city center
4. Set the search point from near a des- tination
It is possible to display the names of POIs
located within approximately 200 miles
(320 km) from the selected search point.
11 08.03HS250h_NAVI_U
75051U
2

NAVIGATION SYSTEM: DESTINATION SEARCH
78
SETTING THE SEARCH POINT FROM
NEAR HERE
Select “Near Here”.
The search point is set at the current posi-
tion, and the “POI Category” screen will be
displayed. (See page 80.)
SETTING THE SEARCH POINT FROM
ALONG MY ROUTE
Select “Along My Route”.
The search point is set and the “POI Cate-
gory” screen will be displayed. (See page
80.)SETTING THE SEARCH POINT FROM
NEAR CITY CENTER
1. Select “Near City Center”.
U2033LC
2. Input the city center name.
U2034LC
3. Select the button of the desired city
center name.
The search point is set and the “POI Cate-
gory” screen will be displayed. (See page
80.)
11 08.03HS250h_NAVI_U
75051U

NAVIGATION SYSTEM: DESTINATION SEARCH
79
SELECTING FROM THE LAST 5 CITIES
1. Select “Near City Center”.
U2035LC
2. Select “Last 5 Cities”.
U2036LC
3. Select the button of the desired city
center name.
The search point is set and the “POI Cate-
gory” screen will be displayed. (See page
80.)SETTING THE SEARCH POINT FROM
NEAR A DESTINATION
1. Select “Near a Destination”.
U2037LC
2. Select the button of the desired des-
tination.
The search point is set and the “POI
Name” screen will be displayed. (See
page 80.)
11 08.03HS250h_NAVI_U
75051U
2