MAZDA CX90 2024 Owners Manual

Turning off the Lights
Turn the light switch to the OFF
position when the vehicle is stopped.
(With Auto Light)
The light switch returns to the AUTO
position automatically.

All the lights that are turned on turn
off, and the parking lights indicator
light
in the instrument cluster
turns off.
Headlight Leveling
The number of passengers and weight
of cargo in the luggage compartment
change the angle of the headlights. The
angle of the headlights will be
automatically adjusted when turning
on the headlights. A system
malfunction or operation conditions
are indicated by a warning.
Refer to Exterior Lights Warning Light
on page 8-50.
Convenient Ways to Use the Light Switch
Coming Home Light
After the vehicle power is switched
OFF, the headlights can be turned on
for a while.
Using the coming home light
1. Switch the vehicle power to ACC orOFF.
2.
The headlights turn on, and then turn
off when any of the following
conditions is met.
A certain amount of time has passed
since occupants got out of the
vehicle and all the doors closed.
Three minutes have passed since the
headlights turned on.
The light switch was operated after
the headlights turned on.
NOTE
The time until the headlights turn off
can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Leaving Home Light
The lights of your vehicle parked at a
distance can be turned on by operating
the key.
Driving
Light Switch
5-70
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Using the leaving home light
Press the unlock button on the key
while the vehicle power is switched
OFF.
When the vehicle receives a key
operation signal, the headlights,
parking lights, taillights, and the license
plate lights turn on.
The lights turn off when any of the
following conditions is met.
Thirty seconds have passed since the
lights turned on.
The light switch is set to the OFF
position.
The lock button on the key is
pressed.
NOTE
The leaving home light can be set so
that it does not to operate.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Driving
Light Switch
5-71
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the TurnSignal Lever
When the lever is operated, the turn
signal lights flash/turn
off.
Using the Turn Signal Lever
Turning left or right
Operate the lever to the 1 or 4
position.
Each turn signal light flashes and the
turn signal light
in the
instrument cluster flashes.
The lever returns to its original position
in conjunction with the steering wheel
operation. If it does not return, return
it by hand.
Changing lanes
Operate the lever to the 2 or 3
position.
While the lever is in the 2 or 3
position, each turn signal light flashes
and the turn signal light
in the
instrument cluster flashes.
If you move the lever to the 2 or 3
position and release it immediately,
the three-flash turn signal operates and
the turn signal light flashes 3 times.
NOTE
The volume of the turn signal lever
sound can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
The three-flash turn signal can be
turned off.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Driving
Tu r n S i g n a l l e v e r
5-72
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Windshield Wiper/Washer Switch
When the switch or lever is operated,
the windshield wiper/washer
operates.
With Auto-Wiper Control
With Intermittent Wiper
Warning and Cautions forUsing the Windshield
Wiper/Washer Switch
WARNING
In cold regions, use washer fluid
containing anti-freeze. In addition,
warm the windshield glass before
spraying washer fluid during cold
temperatures.
If washer fluid not containing
anti-freeze is used during cold
temperatures, it will freeze on the
windshield causing reduced visibility
which may lead to an accident. Before
spraying washer fluid, use the defroster
to make sure that the windshield is
sufficiently warmed up.
CAUTION
 When the windshield wipers are not
used during freezing temperatures or
for a long time, the wiper rubber
may freeze to the glass. If the wipers
are operated while frozen to the
glass, it could damage the wiper
rubber and motor.
 If the windshield wipers are operated
while the windshield glass is dry, the
glass could be scratched and the
wiper rubber damaged. When the
window glass is dry, spray washer
fluid before operating the wipers.
 If the amount of washer fluid spray is
insufficient, do not use the
windshield washer switch. If the
washer switch continues to be
operated with no washer fluid being
sprayed, it could lead to pump
damage.
Driving
Windshield Wiper/Washer Switch
5-73
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Do not cover the rain sensor by
applying stickers or labels to the
windshield. Otherwise, the sensor
cannot detect the amount of rainfall.
When the vehicle power is switched
ON and the wiper lever is in the
AUTO position, the windshield
wipers may operate automatically in
the following cases:
 The area of the windshield above
the rain sensor is touched or wiped
with a cloth.
 The windshield or the rain sensor
area in the cabin is hit.
When the vehicle power is switched
ON and the wiper lever is in the
AUTO position, do not touch the
windshield or the windshield wipers
Otherwise, the windshield wipers
will operate automatically which
could catch your fingers or damage
the windshield wipers. When
removing ice or snow, or cleaning
the windshield, always make sure the
wiper lever is in the OFF position.
How to Use the
Windshield Wiper/ Washer Switch
Using the Auto Wipers*
1. Indicator light
The indicator light of the lever turns
on.
The windshield wipers operate
automatically according to the rainfall
amount.
CAUTION
Even if it is not raining , the windshield
wipers may operate automatically in
the following cases.
The area of the windshield above the
rain sensor is touched or wiped with
a cloth.
 The windshield or the rain sensor
area in the cabin is hit.
NOTE
If a water repellent coating other
than a genuine product is used, the
rain sensor may not detect the
rainfall amount correctly and the
auto wipers may not operate
normally. Do not use a water
repellent coating other than a
genuine product.
Driving
Windshield Wiper/Washer Switch
5-74*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

If dirt or ice is adheres to the top of
the rain sensor on the windshield
and the windshield wipers cannot
remove the dirt or ice even after the
wipers operate several times, the
auto wipers will stop operating. If
the auto wipers stopped, remove the
dirt and ice from the windshield.
The auto wipers could operate from
the effect of strong light sources,
electromagnetic waves, or infrared
light because the rain sensor uses an
optical sensor. It is recommended
that the auto-wiper lever be
switched to the OFF position other
than when driving the vehicle under
rainy conditions.
Changing sensitivity of auto wipers
The rain sensitivity level can be
adjusted by rotating the switch.
1. Higher sensitivity
2. Normal
3. Less sensitivity
Using the Intermittent Wiper
*
The wipers operate intermittently.
Changing the intermittent operation
time
The intermittent operation time can be
adjusted by turning the switch.
1. Fast
2. Normal
3. Slow
Using the Windshield Wipers
Using continuously
Set the lever to the LO or HI position.
In the LO position, the windshield
wipers operate at low speed. In the HI
position, the wipers operate at high
speed.
Driving
Windshield Wiper/Washer Switch
*Some models.5-75
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Using temporarily
Set the lever to the MIST position.
The windshield wipers operate while
the lever is in the MIST position.
Set the lever to the MIST position and
immediately release it to operate the
windshield wipers only once.
Stopping the Windshield Wipers
The windshield wipers stop.
Using the Windshield Washer
While the windshield wipers move out
of their stowed positions to the point
where they start reversing back, the
washer fluid is sprayed and the wipers
operate several times.
NOTE
If you pull the wiper lever while the
windshield wipers are reversing back to
their stowed positions, the next time
the washer fluid is sprayed is during the
next cycle.
Driving
Windshield Wiper/Washer Switch
5-76
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Rear
Wiper/Washer Switch
Using the Rear Wiper
Using intermittent operation
The wiper operates at regular intervals.
Using continuous operation
The wiper operates continuously.
Stopping the Rear Wiper
The rear wiper stops.
Using the Rear Washer
While the switch is in the position,
the washer fluid is sprayed and the
wiper operates.
NOTE
When the windshield washer fluid is
being sprayed, the rear washer fluid
will not be sprayed even if the switch is
operated.
Driving
Windshield Wiper/Washer Switch
5-77
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Rear Window DefoggerSwitch
The rear window defogger warms the
rear window and removes fog.
When the rear window defogger is
operated, the following equipment
operates in conjunction with it.
Mirror defogger*
Refer to How to Use the Mirror
Defogger on page 5-80.
Windshield wiper de-icer*
Refer to How to Use the Windshield
Wiper De-icer on page 5-81.
Warnings and Cautionsfor Using the Rear
Window Defogger Switch
CAUTION
 Be careful not to scratch the
filaments when washing the rear
window. The filaments are installed
inside the rear window.
 Use the rear window defogger while
the engine is running. In addition, do
not use the rear window defogger for
a long time. Otherwise, the
lead-acid battery power could be
depleted.
Driving
Rear Window Defogger Switch
5-78*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Rear
Window Defogger Switch
Using the Rear Window Defogger
Switch
1. Start the hybrid system.
2.
The rear window defogger operates
and the switch indicator light turns on.
The rear window defogger stops
automatically after it operates about
15 minutes.
NOTE
The rear window defogger operation
time can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Stopping the Rear Window Defogger
Press the rear window defogger switch
while the rear window defogger is
operating.
The rear window defogger stops and
the switch indicator light turns off.
Mirror Defogger*
The mirrors are heated using heat
filaments to remove fog.
Driving
Rear Window Defogger Switch
*Some models.5-79
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04