engine coolant MAZDA MODEL CX-5 2017 - RHD (UK, Australia) (in English) User Guide

SignalIndicator Page
(White/Amber)
*Vehicle Speed Alarm Indication Without mul-
ti-information display
4-30
With multi-in- formation dis- play
4-38
Wrench Indication/Indicator Light*14-50
*Glow Indicator Light*14-50
*Diesel Particulate Filter Indication/Indicator Light*14-216
(Blue)
*Low Engine Coolant Temperature Indicator Light 4-50
Shift Position Indication
4-57
Lights-On Indication/Indicator Light 4-63
Headlight High-Beam Indicator LightHeadlight
High-Low Beam 4-66
Flashing the Headlights 4-66
*Front Fog Light Indicator Light 4-68
*Rear Fog Light Indicator Light4-69
Direction Indicator/Hazard Warning Indicator LightsTurn and
Lane-Change Signals4-70
Hazard Warning Flasher4-78
Electric Parking Brake (EPB ) Indication/Indicator Light*1*27-46
When Driving
Instrument Cluster and Display
4-46*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Glow Indicator Light
(SKYACTIV-D 2.2)
When the ignition is switched ON, the
glow indicator light turns on. The glow
indicator light turns
off when preheating is
finished.

A problem in the system might be
indicated under the following conditions.
Have your vehicle inspected by an expert
repairer, we recommend an Authorised
Mazda Repairer.
•The glow indicator light does not turn
on when the ignition is switched ON or
it remains on.
•The glow indicator light is flashing.
NOTE
If the vehicle is left with the ignition
switched ON without starting the engine
and a long period of time has elapsed
since preheating finished, the preheating
may be performed again and the glow
indicator light may turn on.
▼ Wrench Indication/Indicator Light
Type A instrument cluster
Perform maintenance in accordance with
the message.
Type B instrument cluster
When the ignition is switched ON, the
wrench indicator ligh
t is illuminated and
then turns off afte r a few seconds.
When illuminated
The wrench indicator light turns on under
the following conditions:
•When the preset maintenance period has
arrived.
•When it’s time to replace the engine oil.
Refer to Maintenance Monitor on page 6-
17.
When flashing (SKYACTIV-D 2.2)
The sedimentor separates water from the
fuel.
If water accumulates in this filter, the
warning light will flash. When it does,
consult an expert repairer, we recommend
an Authorised Mazda Repairer as soon as
possible.
▼ Low Engine Coolant Temperature
Indicator Light (Blue)*
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.

When Driving
Instrument Cluster and Display
4-50*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Diesel Particulate Filter(SKYACTIV-D 2.2)
The diesel particulate filter collects and
removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
PM collected by the diesel particulate
filter is cleared during normal driving,
however, PM may not be removed and the
diesel particulate filter indicator light may
illuminate under the following conditions:
•If the vehicle is driven at 15 km/h (9
mph) or less continuously.
•If the vehicle is repeatedly driven for a
short period of time (10 minute or less)
or driven while the engine is cold.
•If the vehicle is idled for a long time.
With Multi-inform ation display
When “Soot Accumulation in DPF too
high” is indicated
The particulate matter (PM) cannot be
removed automatically and the amount of
collected PM reaches a specified amount.
After the engine has sufficiently warmed
up (engine coolant temperature of 80 °C
(176 °F) or more), depress the accelerator
pedal and drive the vehicle at a speed of
20 km/h (12 mph) or more for about 15 to
20 minutes to eliminate the PM.
When “DPF malfunction” is indicated
Contact an expert repairer, we recommend
an Authorised Mazda Repairer.
Without Multi-information display
When illuminated
The particulate matter (PM) cannot be
removed automatically and the amount of
collected PM reaches a specified amount.
After the engine has sufficiently warmed
up (engine coolant temperature of 80 °C
(176 °F) or more), d epress the accelerator
pedal and drive the vehicle at a speed of
20 km/h (12 mph) or more for about 15 to
20 minutes to eliminate the PM.
When flashing
Contact an expert repairer, we recommend
an Authorised Mazda Repairer.
Refer to Warning/Indicator Lights on page
4-42.
NOTE
The engine sound and exhaust gas smell
may change when PM is being removed
while driving.
When Driving
Diesel Particulate Filter
4-216
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Recirculated air position (indicator light
illuminated)
Outside air is shut off. Use this position
when going through tunnels, driving in
congested traffic (high engine exhaust
areas) or when quick cooling is desired.
Outside air position (indicator light
turned off)
Outside air is allowed to enter the cabin.
Use this mode for ventilation or
windscreen defrosting.
WA R N I N G
Do not use the position in cold or rainy
weather:
Using the
position in cold or rainy
weather is dangerous as it will cause the
windows to fog up. Your vision will be
hampered, which could lead to a serious
accident.
Rear window defogger switch
Press the rear window defogger switch to
defrost the rear window.
Refer to Rear Windo w Defogger on page
4-76.
▼ Heating
1. Set the mode selector dial to the
position.
2. Set the air intake s elector to the outside
air position (indicator light turns off).
3. Set the temperature control dial to the
hot position.
4. Set the fan control dial to the desired speed.
5. If dehumidified heating is desired, turn
on the air conditioner.
NOTE
•If the windscreen fogs up easily, set the
mode selector dial to the
position.
•If cooler air is desired at face level, set
the mode selector dial at the
position
and adjust the temperature control dial
to maintain maximum comfort.
•The air to the floor is warmer than air
to the face (except when the temperature
control dial is set at the extreme hot or
cold position).
▼ Cooling
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
cold position.
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner by pressing the A/C switch.
5. After cooling begins, adjust the fan control dial and temperature control
dial as needed to maintain maximum
comfort.
CAUTION
If the air conditioner is used while driving
up long hills or in heavy traffic, monitor the
high engine coolant temperature warning
indication/warning li ght to see if it is
illuminated or flashing (page 4-42).
The air conditioner may cause engine
overheating. If the warning light is
illuminated or flashing, turn the air
conditioner off (page 7-37).
Interior Features
Air-Conditioning System
5-8
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

6Maintenance and Care
How to keep your Mazda in top condition.
Essential Information........................6-2 Introduction.................................. 6-2
Scheduled Maintenance.................... 6-3 Scheduled Maintenance................ 6-3
Maintenance Monitor................. 6-17
Owner Maintenance........................ 6-20 Owner Maintenance
Precautions................................. 6-20
Bonnet........................ .................6-22
Engine Compartment
Overview.................................... 6-24
Engine Oil...................................6-25
Engine Coolant........................... 6-29
Brake/Clutch Fluid ..................... 6-31
Window and Headlight Washer
Fluid............................................6-32
Body Lubrication...... .................. 6-32
Wiper Blades.............................. 6-33
Battery........................................ 6-38
Key Battery Replacement........... 6-41
Tyres........................................... 6-43
Light Bulbs................................. 6-47
Fuses........................................... 6-54
Appearance Care............................. 6-61
Exterior Care.............................. 6-61
Interior Care................................6-66
6-1
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Maintenance1st 2nd 3rd 4th 5th 6th 7th 8th 9th10th 11th 12th
Engine coolant*10Replace at first 200,000 km (125, 000 miles) or 10 years; after
that, every 100,000 km (62,500 miles) or 5 years.
Battery
*11IIIIIIIIIIII
Brake lines, hoses and connections I I I I I I I I I I I I
Brake fluid
*12RRRRRR
Parking brake IIIIIIIIIIII
Disc brakes IIIIIIIIIIII
Steering operation and linkages IIIIII
Manual transaxle oil Replace every 180,000 km (112,500 miles).
Rear differential oil
*13
Transfer oil*13
Front and rear suspensi on, ball joints and wheel
bearing axial play IIIIII
Driveshaft dust boots IIIIII
Exhaust system and heat shields Inspect every 80,000 km (50,000 miles) or 5 years.
Bolts and nuts on chassis and body TTTTTT
Body condition (for rust, corrosion and perfora-
tion) IIIIIIIIIIII
Cabin air filter (if installed) RRRRRR
Tyres (including spare tyr e) (with inflation pres-
sure adjustment)
*14IIIIIIIIIIII
Emergency flat tyre repair kit (if installed)
*15IIIIIIIIIIII
Chart symbols:
I: Inspect: Inspect and clean, r epair, adjust, fill up, or replac e if necessary.
R: Replace
C: Clean
T: Tighten
D: Drain
Remarks:
*1 In the countries below, inspect the spark plugs at every 10,000 km (6,250 miles) or 12 months before replacing them at the said interval.
Albania, Bosnia and Herzegovina, Bulgaria, Croatia, Latvia, Mac edonia, Moldova, Montenegro, Romania,
Serbia, Slovakia, Ukraine
*2 If the vehicle is operated in v ery dusty or sandy areas, clean and if necessary, replace the air filter more often
than the recommended intervals.
Maintenance and Care
Scheduled Maintenance
6-4
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

*3 Flexible setting is factory preset for some countries in Europ e. Consult an Authorised Mazda Repairer for
details. Flexible setting can be s et if the vehicle is operated mainly where none of the following conditions
apply.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
Once the flexible maintenance is selected, the vehicle calculat es the remaining oil life based on engine
operating conditions and lets you know when an oil change is du e by illuminating the wrench indicator light in
the instrument cluster.
Reset the engine oil data wheneve r replacing the engine oil regardless of the message/wrench indicator light
display.
*4 If the vehicle is operated primarily under any of the followin g conditions, replace the engine oil and oil filter at
every 10,000 km (6,250 miles) or shorter.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
d) Driving for long period in cold temperatures or driving regul arly at short distance only
e) Driving in extremely hot conditions
f) Driving in mountainous conditions continually
*5 If the vehicle is operated primarily under any of the followin g conditions, replace the engine oil and oil filter at
every 5,000 km (3,125 miles) or 6 months.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
d) Driving for long period in cold temperatures or driving regul arly at short distance only
e) Driving in extremely hot conditions
f) Driving in mountainous conditions continually
*6 For SKYACTIV-D 2.2, r eset the engine oil data whenever replaci ng the engine oil regardless of the message/
wrench indicator light display.
*7 Implement the fuel injection amount correction.*8 Drain water in the fuel system if the indicator lights is ON.*9 Also inspect the air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every
20,000 km (12,500 miles) or 12 months .
a) Driving in dusty conditions
b) Extended periods of idling or low speed operation
c) Driving for long period in col d temperatures or driving regularly at short distance only
d) Driving in extremely hot conditions
e) Driving in mountainous conditions continually
*10 Use of FL-22 is recommended wh en replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*11 Inspect the battery electrolyte level, specific gravity and o uter appearance. The sealed battery only requires an
outer appearance inspection.
*12 If the brakes are used extensi vely (for example, continuous hard driving or mountain driving) or if the vehicle
is operated in extreme ly humid climates, replace the brake flui d annually.
*13 If this component has been submerged in water, the oil should be replaced.*14 Tyre rotation is recommended every 10,000 km (6,250 miles).*15 Check the tyre repair fluid expiration date every year when performing the periodic maintenance. Replace the
tyre repair fluid bottle with new one before the expiration date.
Maintenance and Care
Scheduled Maintenance
6-5
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Except Europe
Israel
Maintenance Interval Number of months or kilometres, whichever comes first
Months 12 24 36 48 60 72 84 96 108 120 132 144
×1000 km 15 30 45 60 75 90 105 120 135 150 165 180
Spark plugs Replace every 120,000 km or 6 years.
Fuel filter Replace every 135,000 km.
Evaporative system (if installed) II I
Fuel lines and hoses IIIIII
Drive belts
*1IIIIIIIIIIII
Engine oil & oil filter
*2RRRRRRRRRRRR
Air filter
*3CCCRCCCRCCCR
Cooling system IIIIII
Engine coolant
*4Replace at first 195,000 km or 10 years; after that, every 90,000 km or 5 years.
Battery
*5IIIIIIIIIIII
Brake lines, hoses and connections I I I I I I I I I I I I
Brake fluid
*6IRIRIRIRIRIR
Parking brake IIIIIIIIIIII
Power brake unit (Brake booster) and hoses IIIIIIIIIIII
Disc brakes IIIIIIIIIIII
Steering operation and linkages IIIIII
Rear differential oil
*7
Transfer oil*7
Front and rear suspensi on, ball joints and wheel
bearing axial play IIIIIIIIIIII
Driveshaft dust boots II II
Exhaust system and heat shields Inspect every 75,000 km.
Bolts and nuts on chassis and body TTTTTTTTTTTT
Body condition (for rust, corrosion and perfora-
tion) Inspect annually.
Cabin air filter (if installed) RRRRRR
Tyres (including spare tyr e) (with inflation pres-
sure adjustment) IIIIIIIIIIII
Emergency flat tyre repair kit (if installed)
*8Inspect annually.
Maintenance and Care
Scheduled Maintenance
6-6
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Chart symbols:
I: Inspect: Inspect and clean, re pair, adjust, fill up, or replac e if necessary.
R: Replace
C: Clean
T: Tighten
D: Drain
Remarks:
*1 Also inspect the air conditi oner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every
10,000 km or shorter.
a) Driving in dusty conditions
b) Extended periods of idling or low speed operation
c) Driving for long period in col d temperatures or driving regularly at short distance only
d) Driving in extremely hot conditions
e) Driving in mountainous conditions continually
*2 If the vehicle is operated primarily under any of the followin g conditions, replace the engine oil and oil filter at
every 10,000 km or shorter.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
d) Driving for long period in cold temperatures or driving regul arly at short distance only
e) Driving in extremely hot conditions
f) Driving in mountainous conditions continually
*3 If the vehicle is operated in v ery dusty or sandy areas, clean and if necessary, replace the air filter more often
than the recommended intervals.
*4 Use of FL-22 is recommended wh en replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*5 Inspect the battery electrolyte level, specific gravity and ou ter appearance. The sealed battery only requires an
outer appearance inspection.
*6 If the brakes are used extensiv ely (for example, continuous hard driving or mountain driving) or if the vehicle
is operated in extreme ly humid climates, replace the brake flui d annually.
*7 If this component has been submerged in water, the oil should be replaced.*8 Check the tyre repair fluid expiration date every year when pe rforming the periodic maintenance. Replace the
tyre repair fluid bottle with new one before the expiration date.

Russia/Belarus/Azerbaijan/Kazakh stan (SKYACTIV-G 2.0, SKYACTIV- G 2.5)
Maintenance IntervalNumber of months or kilometres, whichever comes first.
Months 12 24 36 48 60 72 84 96 108 120 132 144
×1000 km 15 30 45 60 75 90 105 120 135 150 165 180
Drive belts
*1IIIIIIIIIIII
Engine oil Flexible
*2Replace when indicator is ON. (Max interval:12 months or
15,000 km)
Other than
flexible
*3RRRRRRRRRRRR
Azerbaijan
*4Replace every 5,000 km or 6 months.
Maintenance and Care
Scheduled Maintenance
6-7
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Maintenance IntervalNumber of months or kilometres, whichever comes first.
Months 12 24 36 48 60 72 84 96 108 120 132 144
×1000 km 15 30 45 60 75 90 105 120 135 150 165 180
Engine oil filter Flexible
*2Replace when indicator is ON. (Max interval:12 months or
15,000 km)
Other than
flexible
*3RRRRRRRRRRRR
Azerbaijan
*5Replace every 10,000 km or 12 months.
Cooling system IIIIII
Engine coolant
*6Replace at first 195,000 km or 10 years; after that, every 90,000 km or 5 years.
Air filter
*7
Russia/Bela-
rus/Kazakh-
stan CCRCCRCCRCCR
Azerbaijan CRCRCRCRCRCR
Fuel filter Russia/Bela-
rus/Kazakh-
stan
Replace every 120,000 km.
Azerbaijan Replace every 60,000 km.
Fuel lines and hoses IIIIII
Spark plugs IIIIIIIRIIII
Evaporative system (if installed) II I
Battery
*8IIIIIIIIIIII
Brake lines, hoses and connections I I I I I I I I I I I I
Brake fluid
*9RRRRRR
Parking brake IIIIIIIIIIII
Disc brakes IIIIIIIIIIII
Steering operation and linkages I I I I I I I I I I I I
Manual transaxle oil RR
Rear differential oil
*10
Transfer oil*10
Front and rear suspensi on, ball joints and wheel
bearing axial play IIIIIIIIIIII
Driveshaft dust boots IIIIIIIIIIII
Exhaust system and heat shields IIIIIIIIIIII
Bolts and nuts on chassis and body TTTTTTTTTTTT
Hinges and catches LLLLLLLLLLLL
All electrical system IIIIIIIIIIII
Body condition (for rust, corrosion and perfora-
tion) Inspect annually.
Maintenance and Care
Scheduled Maintenance
6-8
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2