reset MAZDA MODEL CX-5 2017 - RHD (UK, Australia) (in English) Service Manual

*3 Flexible setting is factory preset for some countries in Europ e. Consult an Authorised Mazda Repairer for
details. Flexible setting can be s et if the vehicle is operated mainly where none of the following conditions
apply.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
Once the flexible maintenance is selected, the vehicle calculat es the remaining oil life based on engine
operating conditions and lets you know when an oil change is du e by illuminating the wrench indicator light in
the instrument cluster.
Reset the engine oil data wheneve r replacing the engine oil regardless of the message/wrench indicator light
display.
*4 If the vehicle is operated primarily under any of the followin g conditions, replace the engine oil and oil filter at
every 10,000 km (6,250 miles) or shorter.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
d) Driving for long period in cold temperatures or driving regul arly at short distance only
e) Driving in extremely hot conditions
f) Driving in mountainous conditions continually
*5 If the vehicle is operated primarily under any of the followin g conditions, replace the engine oil and oil filter at
every 5,000 km (3,125 miles) or 6 months.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
d) Driving for long period in cold temperatures or driving regul arly at short distance only
e) Driving in extremely hot conditions
f) Driving in mountainous conditions continually
*6 For SKYACTIV-D 2.2, r eset the engine oil data whenever replaci ng the engine oil regardless of the message/
wrench indicator light display.
*7 Implement the fuel injection amount correction.*8 Drain water in the fuel system if the indicator lights is ON.*9 Also inspect the air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every
20,000 km (12,500 miles) or 12 months .
a) Driving in dusty conditions
b) Extended periods of idling or low speed operation
c) Driving for long period in col d temperatures or driving regularly at short distance only
d) Driving in extremely hot conditions
e) Driving in mountainous conditions continually
*10 Use of FL-22 is recommended wh en replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*11 Inspect the battery electrolyte level, specific gravity and o uter appearance. The sealed battery only requires an
outer appearance inspection.
*12 If the brakes are used extensi vely (for example, continuous hard driving or mountain driving) or if the vehicle
is operated in extreme ly humid climates, replace the brake flui d annually.
*13 If this component has been submerged in water, the oil should be replaced.*14 Tyre rotation is recommended every 10,000 km (6,250 miles).*15 Check the tyre repair fluid expiration date every year when performing the periodic maintenance. Replace the
tyre repair fluid bottle with new one before the expiration date.
Maintenance and Care
Scheduled Maintenance
6-5
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Maintenance IntervalNumber of months or kilometres, whichever comes first.
Months 12 24 36 48 60 72 84 96 108 120 132 144
×1000 km 15 30 45 60 75 90 105 120 135 150 165 180
Cabin air filter (if installed) RRRRRR
Tyres (including spare tyre) (with inflation pres-
sure adjustment)
*11IIIIIIIIIIII
Emergency flat tyre re pair kit (if installed)
*12Inspect annually.
Chart symbols:
I: Inspect: Inspect and clean, re pair, adjust, fill up, or replac e if necessary.
R: Replace
C: Clean
T: Tighten
L: Lubricate
Remarks:
*1 Also inspect the air conditi oner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every 7,500
km or 6 months.
a) Driving in dusty conditions
b) Extended periods of idling or low speed operation
c) Driving for long period in col d temperatures or driving regularly at short distance only
d) Driving in extremely hot conditions
e) Driving in mountainous conditions continually
*2 Flexible setting can be set if the vehicle is operated mainly where none of the following conditions apply.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
The vehicle calculates the rem aining oil life based on engine o perating conditions and lets you know when an
oil change is due by illuminating the wrench indicator light in the instrument cluster.
Replace the engine oil and filter when message/wrench indicator light is ON. And they must be changed at
least once a year or within 15,000 km since last engine oil and filter change.
The system must be reset whenever replacing the engine oil regardless of the message/wrench indicator light
display.
*3 If the vehicle is operated primarily under any of the followin g conditions, replace the engine oil and oil filter at
every 7,500 km or 6 months.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
d) Driving for long period in cold temperatures or driving regul arly at short distance only
e) Driving in extremely hot conditions
f) Driving in mountainous conditions continually
Maintenance and Care
Scheduled Maintenance
6-9
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

*2 Flexible setting can be set if the vehicle is operated mainly where none of the following conditions apply.
a) Purpose of vehicle use is police car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idli ng or low speed operation
The vehicle calculates the remaining oil life based on engine o perating conditions and lets you know when an
oil change is due by illuminating the wrench indicator light in the instrument cluster.
Replace the engine oil and filter when message/wrench indicator light is ON. And they must be changed at
least once a year or within 10,00 0 km since last engine oil and filter change.
The system must be reset whenever replacing the engine oil rega rdless of the message/wrench indicator light
display.
*3 If the vehicle is operated prim arily under any of the following conditions, replace the engine oil and oil filter at
every 5,000 km or 6 months.
a) Purpose of vehicle use is police car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idli ng or low speed operation
d) Driving for long period in cold temperatures or driving regul arly at short distance only
e) Driving in extremely hot conditions
f) Driving in mountainous conditions continually
*4 For SKYACTIV-D 2.2, reset the e ngine oil data whenever replacing the engine oil regardless of the message/
wrench indicator light display.
*5 Implement the fuel injection amount correction.*6 If the vehicle is operated in v ery dusty or sandy areas, clean the air filter at every 5,000 km or 6 months.*7 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*8 Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an
outer appearance inspection.
*9 If the brakes are used extensively (for example, continuous ha rd driving or mountain driving) or if the vehicle
is operated in extremely humid c limates, replace the brake fluid annually.
*10 If this component has been submerged in water, the oil should be replaced.*11 Tyre rotation is recommended every 10,000 km.*12 Check the tyre repair fluid e xpiration date every year when performing the periodic maintenance. Replace the
tyre repair fluid bottle with new one before the expiration date.

Maintenance and Care
Scheduled Maintenance
6-12
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Maintenance Inter-val Number of months or kilometres (miles), whichever comes first
Months 6 121824303642485460667278849096
×1000 km 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
×1000 miles
6.25 12.518.752531.2537.543.755056.2562.568.757581.2587.593.75100
Bolts and nuts on chassis and body T T T T T T T T
Body condition (for rust, corrosion
and perforation) Inspect annually
Cabin air filter (if installed) R R R R R R R R
Tyres (including spare tyre) (with
inflation pressure adjustment) IIIIIIIIIIIIIIII
Tyre rotation Rotate every 10,000 km (6,250 miles).
Emergency flat tyre repair kit (if
installed)
*11Inspect annually.
Chart symbols:
I: Inspect: Inspect and clean, re pair, adjust, fill up, or replac e if necessary.
R: Replace
C: Clean
T: Tighten
D: Drain
Remarks:
*1 If the vehicle is operated primarily under any of the followin g conditions, replace the engine oil and oil filter
more often than the recommended intervals.
a) Purpose of vehicle use is poli ce car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idling or low speed operation
d) Driving for long period in cold temperatures or driving regul arly at short distance only
e) Driving in extremely hot conditions
f) Driving in mountainous conditions continually
*2 In the countries below, inspect t he spark plugs at every 10,000 km (6,250 miles) or 1 year before replacing
them at the said interval.
Algeria, Armenia, Angola, Bahrain, Bolivia, Burundi, B.Virgin, Cambodia, Cameroon, Chile, Costa Rica, Cote
d'Ivoire, Curacao, El Salvador, G abon, Ghana, Georgia, Guatemala, Haiti, Honduras, Hong Kong, Iran, Jordan,
Kenya, Macau, Malaysia, Mongolia, Mozambique, Myanmar, Nigeria, Nicaragua, Oman, Panama, Papua New
Guinea, Peru, Philippines, Seneg al, Seychelles, Syria, Tanzania, United Arab Emirates, Vietnam, Zaire,
Zimbabwe
*3 For SKYACTIV-D 2.2, Reset the e ngine oil data whenever replacing the engine oil regardless of the message/
wrench indicator light display.
*4 Implement the fuel injection amount correction.
Maintenance and Care
Scheduled Maintenance
6-15
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Maintenance Monitor
▼Maintenance Monitor (Type A audio)
“Oil Change” with flexible setting*1 is available. Consult an Au
thorised Mazda Repairer for
details
*2. When the engine oil flexible maintenance setting is selected, the wrench indicator
light in the instrument cluster w ill be illuminated when remaining oil life becomes less than
1,000 km (600 mile), or remaining days are less than 15 (Whiche ver comes first).
Reset method
Press and hold the instrument panel illumination knob with the ignition switched off, then
switch it on. Keep pressing the instrument panel illumination k nob for more than 5 seconds.
The master warning light will flash for a few seconds when the reset is completed.
Instrument panel illumination knob
*1 The engine oil flexible maintenance setting is available (only some models). Based on
the engine operating conditions, the onboard computer in your v ehicle calculates the
remaining oil life.
*2 When the engine oil flexible maintenance setting is selected, the system must be reset
whenever replacing the engine oil regardless of the wrench indi cator light display.
Maintenance and Care
Scheduled Maintenance
6-17
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Maintenance Monitor (Type B audio)
1. Select the icon on the home screen to display the “Applications” screen.
2. Select “Vehicle Status Monitor”.
3. Select “Maintenance” to display the maintenance list screen.
4. Switch the tab and select the setting item you want to change .
You can customize settings in the setup display as follows:
Ta b I t e m E x p l a n a t i o n
Scheduled Setting
Notification can be switched on/off.
Time (months) Displays the time or distance until maintenance is due.
Select this item to set the maintenance period.
The wrench indication/indicator light in the instrument cluster
will be illuminated when the remaining distance is less than 1, 000
km or 600 mile, or the remaining number of days is less than 15
(whichever comes first).
Distance (km or mile)
Reset
Resets the time and distance to the initial values.
Once the system turns on, it needs to be reset whenever carrying
out maintenance.
Tyre Rotation Setting
Notification can be switched on/off.
Distance (km or mile) Displays the distance until tyre rotation is due.
Select this item to set the tyre rotation distance.
The wrench indication/indicator
light in the instrument cluster
will be illuminated when the remaining distance is less than 1, 000
km or 600 mile.
Reset Resets the remaining distance to the initial value.
Once the system turns on, it need
s to be reset whenever rotating
the tyres.
Oil Change Setting
*1Notification can be switched on/off.
Distance (km or mile) Displays the distance until
the oil replacement is due.
Select this item to set the oil replacement distance.
The wrench indication/indicator light in the instrument cluster
will be illuminated when the remaining distance is less than 1, 000
km or 600 mile.
Reset
*2Resets the remaining distance to the initial value.
Once the system turns on, it need s to be reset whenever replacing
the engine oil.
*1 The engine oil flexible mainten ance setting is available (only some models). Consult an Authorised Mazda
Repairer for details.
When the engine oil flexible mai ntenance setting is selected, you will see the following items in the display.
The vehicle calculates the remaining oil life based on the engi ne operating conditions and lets you know when
an oil change is due by illuminating the wrench indicator light in the instrument cluster.
*2 Whenever the engine oil is replaced, the vehicle engine control unit reset is necessary for SKYACTIV-D 2.2.
Your Authorised Mazda Repairer will be able to reset the engine control unit or refer to the vehicle engine
control unit reset procedure on page 6-27.
Maintenance and Care
Scheduled Maintenance
6-18
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

TabItem Explanation
Oil Change Oil life (%) Displays the engine oil life un
til the oil replacement is due.
The wrench indication/indicator l ight in the instrument cluster
will be illuminated when remai ning oil life distance is less
than 1,000 km (600 mile), or remaining days are less than 15
(whichever comes first).
Reset Resets the remaining oil life to 100 %.
The system must be reset whenever replacing the engine oil.
Maintenance and Care
Scheduled Maintenance
6-19
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

(SKYACTIV-D 2.2)
SKYACTIV-D 2.2 uses specified oil. Please confirm the specification in owner's manual. If
engine oil other than the specified oil is used, the Diesel Particulate Filter
effective period of
use will be shortened or the Diesel Particulate Filter may be damaged.
NOTE
(SKYACTIV-G 2.0 and SKYACTIV-G 2.5)
•It is normal for all engines to consume engine oil under normal driving conditions.
Engine oil consumption may be as high as 0.8 L/1,000 km (1 L/800 miles). This may be as
a result of evaporation, internal ventilation or burning of the lubricating oil in the
working engine. Oil consumption may be high er when the engine is new due to the
running-in process. Oil consumption is also dependant on engine speed and engine load.
Under extreme driving conditions, oil consumption may be higher.
(SKYACTIV-D 2.2)
•Whenever the engine oil is replaced, the vehicles engine control unit needs to be reset as
soon as possible. Otherwise the wrench indi cator light or engine oil warning light may
turn on. To reset the engine control unit, consult an expert repairer, we recommend an
Authorised Mazda Repairer or refer to the vehicle engine control unit reset procedure on
page 6-27.
•Inspect the engine oil level periodically. When inspecting the engine oil, if the engine oil
level is exceeds the “X” mark on the dipstick, replace the engine oil. This should be done
by an expert repairer, we recommend an Authorised Mazda Repairer. When replacing the
engine oil, inspect the oil level using the oil dipstick and refill so that the engine oil level
is within the range between MIN and MAX as shown in the figure.

X Mark
MAX
MIN
▼ Vehicle Engine Control Unit Reset Procedure
NOTE
This procedure is intended for vehicles
with SKYACTIV-D 2.2 and vehicles with
SKYACTIV-G 2.0 or SKYACTIV-G 2.5 which the engine oil flexible maintenance setting is
selected.
After replacing the engine oil, have a repair shop such as an A uthorised Mazda Repairer
perform the initialization (engine oil data resetting) of the r ecorded value. If the value
recorded by the computer is not initialized, the wrench indicat or light may not turn off or it
may turn on earlie r than normal.
Maintenance and Care
Owner Maintenance
6-27
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

NOTE
The initialization (engine oil data resetting) of the recorded value can be performed using
the following procedure:
1. Switch the ignition OFF.
2. Switch the ignition ON with the instrument panel illumination knob pressed, and press and hold the instrument panel illumination knob for about 5 seconds until the master
warning light
flashes.

Instrument panel illumination knob
3. After the master warning light flashes for several seconds, the initialization is
completed.
▼ Inspecting Engine Oil Level
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal operating temperature.
3. Turn it off and wait at least 5 minutes for the oil to return to the sump.
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
SKYACTIV-G 2.0 and
SKYACTIV-G 2.5

MAX
OK
MIN
Maintenance and Care
Owner Maintenance
6-28
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

ItemFeatureFactory Set-
ting Available Set-
tings Settings
Change
Method
Lights-on re-
minder (page
7-63) Warning beep volume
High, Low or
Off High/Low/Off A ―
Coming home
light (page 4-66) Time until headlights turn off
30 seconds120 seconds/
90 seconds/
60 seconds/
30 seconds/ Off A―
Leaving home
light (page 4-67)
Operational/non-opera-
tional European models On On/Off A ―Except European
models
Off On/Off A ―
Direction indica-
tor (page 4-70)Beep volume
High High/Low A ―
Three-flash turn
signal (page
4-71)Operational/non-operational
On or Off On/Off A ―
Rear window
defogger (page
4-76)The operation time for the rear window defog-
ger can be changed.
15 minutes15 minutes/
Continuous
*5――
System
Language Language indicated in display EnglishDepends on
market
*6A―
Temperature Temperature unit indi cated in display°F or °C °F/°C A ―
Distance Distance unit indicated in display mi or km mi/km A ―
Fuel Economy Monitor (page 4-96)
Ending display Display/non-display Off On/Off B ―
Fuel economy
resetting proce-
dureLinkage/non-linkage with fuel economy reset
and trip meter A reset
Off On/Off B ―
Specifications
Personalisation Features
9-17
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2