display MAZDA MODEL CX-5 2017 Owners Manual (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2017, Model line: MODEL CX-5, Model: MAZDA MODEL CX-5 2017Pages: 664, PDF Size: 11.73 MB
Page 478 of 664

6–2
Maintenance and Care
Essential Information
                Introduction
    Be careful not to hurt yourself when inspecting your vehicle, replacing \
a tire, or doing some 
kind of maintenance such as car washing.
  In particular, wear thick work gloves such as cotton gloves when touching areas that \
are diffi cult to see while inspecting or working on your vehicle. Doing inspectio\
ns or 
procedures with your bare hands could cause injury.
  
  If you are unsure about any procedure it describes, we strongly urge you to have a reliable 
and quali fi ed service shop perform the work, preferably an Authorized Mazda Dealer.
  
  Factory-trained Mazda technicians and genuine Mazda parts are best for y\
our vehicle. 
Without this expertise and the parts that have been designed and made esp\
ecially for your 
Mazda, inadequate, incomplete, and insuf fi cient servicing may result in problems. This 
could lead to vehicle damage or an accident and injuries.
  
  For expert advice and quality service, consult an Authorized Mazda Dealer.
  
  To continue warranty eligibility and to protect your investment, it is yo\
ur responsibility to 
properly maintain your vehicle according to factory recommended schedule\
s outlined in this 
manual. As part of this you must keep your maintenance records, receipts, repair\
 orders and 
any other documents as evidence this maintenance was performed. You must present these 
documents, should any warranty coverage disagreement occur. Failure to do so can result in 
your warranty being voided either in whole or in part.
  
  This evidence may consist of the following:
     The Mazda Scheduled Maintenance Record, refer to the Warranty Booklet, must be 
completely  fi lled out showing mileage, repair order number, date for each service, and 
signed by a quali fi ed automotive service technician who service vehicles.
   Original copies of repair orders or other receipts that include the mile\
age and date the 
vehicle was serviced. Each receipt should be signed by a quali fi ed automotive service 
technician.
   For self maintenance, a statement that you completed the maintenance you\
rself, 
displaying mileage and the date the work was performed. Also, receipts for the 
replacement parts ( fl uid,  fi lters, etc.) indicating the date and mileage must accompany this 
statement.
    
  
   NOTE
  If you elect to perform maintenance yourself or have your vehicle servic\
ed at a location 
other than an Authorized Mazda Dealer, Mazda requires that all  fl uids, parts and materials 
must meet Mazda standards for durability and performance as described in this manual.
   
  
CX-5_8FN1-EA-16L_Edition1.indb   22016/12/12   10:07:05 
Page 482 of 664

6–6
Maintenance and Care
Scheduled Maintenance
  Remarks:
     *1   The  engine  oil  and fi lter must be changed at least once a year or within 12,000 km (7,500 mi\
les) since last 
engine oil and  fi lter change. Reset the engine oil data whenever replacing the engine oil\
 regardless of the 
message/wrench indicator light display.
   *2   Use of FL-22 is recommended when replacing engine coolant. Using engine \
coolant other than FL-22 may  cause serious damage to the engine and cooling system.
   *3   According to state/provincial and federal regulations, failure to perfor\
m maintenance on these items will not  void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the 
recommended time or mileage/kilometer period to ensure long-term reliabi\
lity.
   *4   If this component has been submerged in water, the oil should be replaced.
   *5   Check  the  tire  repair  fl uid expiration date every year when performing the periodic maintenance.\
 Replace the 
tire repair  fl uid bottle with new one before the expiration date.
    
   
          Schedule  2
      U.S.A. and Puerto Rico residents - Severe driving conditions maintenance interval
 Maintenance  Interval   Number of months or kilometers (miles), whichever comes 
fi rst. 
 Months   6   12   18   24   30   36   42   48   54   60   66   72 
 ×1000  km   8   16   24   32   40   48   56   64   72   80   88   96 
 ×1000  miles   5   10   15   20   25   30   35   40   45   50   55   60 
 Spark plugs   Replace every 120,000 km (75,000 miles). 
 Air  fi lter 
*1    Replace when any equivalent timing of replacing engine oil. 
(Max interval: 36 months or 60,000 km (37,500 miles)) 
 Drive  belts    I    I  
 Engine oil &  fi lter   Flexible 
*2  
 Replace when wrench indicator light is ON. (Max interval: 12 
months or 12,000 km (7,500 miles)) 
 Fixed    R     R     R     R     R     R     R     R     R     R     R     R  
 Engine  coolant 
*3    Replace  at 
fi rst 192,000 km (120,000 miles) or 10 years; 
after that, every 96,000 km (60,000 miles) or 5 years. 
 Engine  coolant  level    I     I     I     I     I     I     I     I     I     I     I     I  
 Fuel lines and hoses 
*4     I    I    I  
 Hoses and tubes for emission 
*4     I  
 Function  of  all  lights    I     I     I     I     I     I     I     I     I     I     I     I  
 Brake  lines,  hoses  and  connections    I    I    I  
 Brake and clutch  fl  uid  level    I     I     I     I     I     I     I     I     I     I     I     I  
 Disc  brakes    I     I     I     I     I     I  
 Tire  (Rotation)   Rotate when any equivalent timing of replacing engine oil. 
(Max interval: 8,000 km (5,000 miles)) 
 Tire  in fl  ation  pressure  and  tire  wear    I     I     I     I     I     I     I     I     I     I     I     I  
 Steering  operation  and  linkages    I    I    I  
 Front and rear suspension, ball joints and wheel 
bearing axial play    I  
  I    I  
 Rear  differential  oil    
*5  
CX-5_8FN1-EA-16L_Edition1.indb   62016/12/12   10:07:05 
Page 483 of 664

6–7
Maintenance and Care
Scheduled Maintenance
 Maintenance  Interval  Number of months or kilometers (miles), whichever comes 
fi rst. 
 Months   6   12   18   24   30   36   42   48   54   60   66   72 
 ×1000  km   8   16   24   32   40   48   56   64   72   80   88   96 
 ×1000  miles   5   10   15   20   25   30   35   40   45   50   55   60 
 Transfer  oil    
*5  
 Driveshaft  dust  boots    I    I    I  
 Bolts  and  nuts  on  chassis  and  body    T    T    T  
 Exhaust system and heat shields   Inspect every 72,000 km (45,000 miles) or 5 years. 
 All  locks  and  hinges    L     L     L     L     L     L     L     L     L     L     L     L  
 Washer  fl  uid  level    I     I     I     I     I     I     I     I     I     I     I     I  
 Emergency  fl at tire repair kit (if installed) 
*6    Inspect  annually. 
 Cabin  air  fi lter   Replace when any equivalent timing of replacing engine oil. 
(Max interval:24 months or 48,000 km (30,000 miles)) 
    Chart  symbols:
     I:  Inspect: Inspect and clean, repair, adjust,  fi ll up, or replace if necessary.
   R:   Replace
   L:   Lubricate
   T:    Tighten
  Remarks:
     *1   If the vehicle is operated in very dusty or sandy areas, clean and if ne\
cessary, replace the air  fi lter more often 
than the recommended intervals.
   *2   Engine  oil  fl exible maintenance is available for U.S.A. and Puerto Rico residents who\
se vehicle is operated 
mainly where none of the following conditions apply.
          Extended periods of idling or low-speed operation such as police car, taxi or driving school car
        Driving in dusty conditions        If any do apply, follow  fi xed maintenance.
    The engine oil and  fi lter must be changed at least once a year or within 12,000 km (7,500 mi\
les) since last 
engine oil and  fi lter change. Reset the engine oil data whenever replacing the engine oil\
 regardless of the 
message/wrench indicator light display.
   *3   Use of FL-22 is recommended when replacing engine coolant. Using engine \
coolant other than FL-22 may  cause serious damage to the engine and cooling system.
   *4   According to state/provincial and federal regulations, failure to perfor\
m maintenance on these items will not  void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the 
recommended time or mileage/kilometer period to ensure long-term reliabi\
lity.
   *5   If this component has been submerged in water, the oil should be replaced.
   *6   Check  the  tire  repair  fl uid expiration date every year when performing the periodic maintenance.\
 Replace the 
tire repair  fl uid bottle with new one before the expiration date.
    
   
  
  
CX-5_8FN1-EA-16L_Edition1.indb   72016/12/12   10:07:05 
Page 492 of 664

6–16
Maintenance and Care
Scheduled Maintenance
 Maintenance  Monitor
               Maintenance Monitor (Type A)
    Based on the engine operating conditions, the onboard computer in your v\
ehicle calculates 
the remaining oil life in the United States and Puerto Rico. The wrench indicator light in the 
instrument cluster will be illuminated when remaining oil life becomes l\
ess than 1,000 km 
(600 mile), or remaining days are less than 15 (whichever comes fi rst).
  The system must be reset whenever replacing the engine oil.
  Reset  method
    Press and hold the dashboard illumination knob with the ignition switche\
d off, then switch 
it on. Keep pressing the dashboard illumination knob for more than 5 sec\
onds. The master 
warning light will  fl ash for a few seconds when the reset is completed.
 
Dashboard illumination knob
 
          Maintenance Monitor (Type B)
     1.   Select  the     icon on the home screen to display the “Applications” screen.
   2.   Select  “Vehicle  Status  Monitor”.
   3.   Select “Maintenance” to display the maintenance list screen.
   4.   Switch the tab and select the setting item you want to change.
    
CX-5_8FN1-EA-16L_Edition1.indb   162016/12/12   10:07:06 
Page 493 of 664

6–17
Maintenance and Care
Scheduled Maintenance
    You can customize settings in the setup display as follows:  
 Tab  Item   Explanation 
 Scheduled   Setting 
 Notifi cation can be switched on/off. 
 Time  (months)   Displays the time or distance until maintenance is due.
  Select this item to set the maintenance period.
  The wrench indication/indicator light in the instrument cluster will 
be illuminated when the remaining distance is less than 
1,000 km or 600 mile, or the remaining number of days is less than 
15 (whichever comes 
fi rst). 
 Distance (km or mile) 
 Reset   Resets the time and distance to the initial values.
  Once the system turns on, it needs to be reset whenever carrying 
out maintenance. 
 Tire  Rotation   Setting 
 Notifi cation can be switched on/off. 
 Distance (km or mile)   Displays the distance until tire rotation is due.
  Select this item to set the tire rotation distance.
  The wrench indication/indicator light in the instrument cluster will 
be illuminated when the remaining distance is less than 1,000 km 
or 600 mile. 
 Reset   Resets the remaining distance to the initial value.
  Once the system turns on, it needs to be reset whenever rotating 
the tires. 
 Oil  Change   Setting  Interval 
 Oil replacement period can be selected from the 
fl exible setting or 
fi  xed setting, or it can be set to non-display.
  The  fl exible setting is available only in the United States and 
Puerto Rico. Once engine oil  fl exible maintenance is selected, 
the vehicle calculates the remaining oil life based on the engine 
operating conditions. The vehicle lets you know when an oil 
change is due by illuminating the wrench indicator light in the 
instrument cluster. Mazda Genuine 0W-20 oil and Castrol 
®   0W-20 
oil are required to achieve optimum performance. 
 Distance (km or mile)
  (Displays  only  in  fi xed 
setting)   Displays the distance until the oil replacement is due.
  Select this item to set the oil replacement distance.
  The wrench indication/indicator light in the instrument cluster will 
be illuminated when the remaining distance is less than 1,000 km 
or 600 mile. 
 Oil life (km or mile)
  (Displays  only  in  fl exible 
setting)   Displays the engine oil life until the oil replacement is due.
  The wrench indication/indicator light in the instrument cluster will 
be illuminated when the remaining oil life distance is less than 
1,000 km or 600 mile. 
 Reset   In 
fl exible setting: Resets the remaining oil life to 100 %.
  In  fi xed setting: Resets the remaining distance to the initial value.
  Once the Flexible Oil Maintenance Setting is selected, the system 
must be reset whenever replacing the engine oil. 
   
CX-5_8FN1-EA-16L_Edition1.indb   172016/12/12   10:07:06 
Page 513 of 664

6–37
Maintenance and Care
Owner Maintenance
  The following conditions indicate that the 
battery power is low:
    The KEY indicator light (green)  fl ashes 
in the instrument cluster for about 
30 seconds after the engine is turned off 
(for vehicles with a type A instrument 
cluster (page  4-32 ), messages are 
displayed in the instrument cluster).
   The system does not operate and 
the operation indicator light on the 
transmitter does not  fl ash when the 
buttons are pressed.
   The system's operational range is 
reduced.
    
  Replacing the battery at an Authorized 
Mazda Dealer is recommended to prevent 
damage to the key. If replacing the battery 
by yourself, follow the instruction.
  Replacing the key battery
     1.   Press  the  knob  and  pull  out  the  auxiliary key.
 
Knob
     2.   Twist  a  tape-wrapped 
fl athead 
screwdriver in the direction of the 
arrow and open the cover slightly.
 
Cover
 
   3.   Insert  the  tape-wrapped  fl athead 
screwdriver into the gap and slide it in 
the direction of the arrow.
 
Cover
Gap
 
   4.   Twist  the  fl athead screwdriver in the 
direction of the arrow and remove the 
cover.
 
Cover
 
CX-5_8FN1-EA-16L_Edition1.indb   372016/12/12   10:07:12 
Page 541 of 664

6–65
Maintenance and Care
Appearance Care
*Some models.
          Active Driving Display Maintenance * 
            Windshield  type
    The dust-proof sheet has a coating. When 
cleaning, do not use a hard or rough-
surface cloth, or cleaning detergent. In 
addition, if a chemical solvent gets on 
the active driving display, wipe it off 
immediately. The dust-proof sheet could 
be damaged and the surface coating could 
be scratched. Use a  fi ne, soft cloth such as 
those used for cleaning eyeglasses.
   NOTE
  Use of compressed air when cleaning the 
dust-proof sheet is recommended.
   
    Auto  fl ip-up type
    The combiner and mirror surface have 
a special coating. When cleaning it, do 
not use a hard cloth, a cloth with a rough 
surface, or cleaning detergent. Use a  fi ne-
textured, soft cloth. .
  If a chemical solvent gets on the combiner 
or mirror surface, wipe it off immediately. 
Otherwise, they could be damaged and the 
surface coating could be scratched.
          Cleaning the Window Interiors
            If  the  windows  become  covered  with  an 
oily, greasy, or waxy fi  lm, clean them with 
glass cleaner. Follow the directions on the 
container.
  CAUTION 
  Do not scrape or scratch the inside of  the window glass. It could damage the 
thermal fi  laments and the antenna lines.
  When washing the inside of the window glass, use a soft cloth dampened in 
lukewarm water, gently wiping the 
thermal fi  laments and the antenna lines.
  Use of glass cleaning products could  damage the thermal fi  laments and the 
antenna lines.
     
          Cleaning the Floor Mats
            Rubber  fl oor mats should be cleaned with 
mild soap and water only.
  WARNING 
  Do not use rubber cleaners, such as tire 
cleaner or tire shine, when cleaning 
rubber fl  oor mats:   Cleaning the rubber fl  oor mats with 
rubber cleaning products makes the 
fl  oor mats slippery.
  This may cause an accident when 
depressing the accelerator, brake, or 
clutch (Manual transaxle) pedal or 
when getting in or out of the vehicle.
   
  After  removing  the  fl oor mats for cleaning, 
always reinstall them securely (page 
 3-51 ).
         
CX-5_8FN1-EA-16L_Edition1.indb   652016/12/12   10:07:18