display MAZDA MODEL CX-5 2017 Owners Manual (in English)

7–42
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Power Liftgate Warning Beep *
If system operation precautions are
necessary, the driver is notifi ed by the
warning sound.

Cautions What to check
The beep sounds 3 times The conditions required
for the power liftgate
to operate have not
been met, such as an
object being stuck in the
liftgate.
The beep sound
continues The vehicle is being
driven with the liftgate
open. Stop the vehicle
and close the liftgate.

Electric Parking Brake (EPB)
Warning Beep
The warning buzzer is activated under the
following conditions:
   The vehicle is driven with the electric
parking brake (EPB) applied.
   The electric parking brake (EPB) switch
is pulled while the vehicle is driven.

AUTOHOLD Warning Beep
Warning light fl ashes/message is
displayed and beep sound is activated
simultaneously for about fi ve seconds
when using AUTOHOLD function or
when AUTOHOLD switch is operated.
Because a problem with AUTOHOLD
function has occurred, AUTOHOLD
function does not operate even if
AUTOHOLD switch is operated.

If the warning light fl ashes/message is
displayed and the beep sound is activated
simultaneously, have your vehicle
inspected at an Authorized Mazda Dealer.
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or fl ashes and
the buzzer operates at the same time.
Refer to Warning Indication/Warning
Lights on page 4-33 .
Tire Infl ation Pressure Warning
Beep *
The warning beep sound will be heard
for about 3 seconds if the tire pressures
decrease.
If the tire pressure decreases extremely,
a beep sound will be heard for
approximately 30 seconds.
Refer to Tire Pressure Monitoring System
on page 4-172 .
Blind Spot Monitoring (BSM) Warning Beep *
Driving forward
The warning beep operates when the turn
signal lever is operated to the side where
the Blind Spot Monitoring (BSM) warning
light is illuminated.
NOTE
A personalized function is available to
change the Blind Spot Monitoring (BSM)
warning beep sound volume.
Refer to Personalization Features on page
9-11 .

Reversing
If a moving object such as a vehicle or
two-wheeled vehicle approaches on the
left or right from behind your vehicle, the
Blind Spot Monitoring (BSM) warning
sound is activated.
CX-5_8FN1-EA-16L_Edition1.indb 422016/12/12 10:07:29

7–43
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Lane Departure Warning Sound *
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
  The volume of the Lane-keep Assist
System (LAS) & Lane Departure
Warning System (LDWS) warning sound
can be changed.
 Refer to Personalization Features on page 9-11 .
  The type of the Lane-keep Assist System
(LAS) & Lane Departure Warning
System (LDWS) warning sound can be
changed.
 Refer to Personalization Features on page 9-11 .

Collision warning *
If there is a possibility of a collision with
a vehicle ahead or an obstruction at the
rear of the vehicle, the warning light in the
instrument cluster fl ashes at the same time
as the warning indication is displayed in
the multi-information display or the active
driving display, and a warning sound is
activated intermittently.
Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function) System
Warnings
*
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system warnings notify the
driver of system problems and precautions
on use when required. Check after hearing
a warning beep sound.

Warning beep What to check
While the Mazda Radar
Cruise Control with
Stop & Go function
(MRCC with Stop &
Go function) system is
operating, a single beep
sound is heard when
“Front radar blocked” is
displayed in the multi-
information display. Cancel the Mazda Radar
Cruise Control with
Stop & Go function
(MRCC with Stop &
Go function) system if
the radar sensor (front)
becomes dirty. Clean the
area around the radar
sensor (front).
The beep sounds
intermittently while the
vehicle is being driven. The distance between
your vehicle and the
vehicle ahead is too
close. Verify the safety
of the surrounding area
and reduce vehicle
speed.
While the Mazda Radar
Cruise Control with
Stop & Go function
(MRCC with Stop &
Go function) system is
operating, a single beep
sound is heard when
“Front radar sensor
system malfunction” is
displayed in the multi-
information display. A malfunction in the
system may be indicated.
Check the center display
to verify the problem
and then have your
vehicle inspected by
an Authorized Mazda
Dealer.

CX-5_8FN1-EA-16L_Edition1.indb 432016/12/12 10:07:29

7–45
If Trouble Arises
Active Driving Display Does Not Operate
*Some models.
If the Active Driving Display does not operate *
If the active driving display does not operate, switch the ignition off and then restart the
engine. If the active driving display does not operate even with the eng\
ine restarted, have
the vehicle inspected at an Authorized Mazda Dealer.

CX-5_8FN1-EA-16L_Edition1.indb 452016/12/12 10:07:30

9–6
Specifi cations
Specifi cations
Dimensions
Item Vehicle specifi cation
Overall length 4,550 mm (179.1 in)
Overall width 1,840 mm (72.4 in)
Overall height 1,675 mm (65.9 in)
Front tread 17 inch styled steel wheel vehicle
1,586 mm (62.4 in)
17 inch aluminum wheel vehicle 1,596 mm (62.8 in)
19 inch aluminum wheel vehicle 1,596 mm (62.8 in)
Rear tread 17 inch styled steel wheel vehicle
1,586 mm (62.4 in)
17 inch aluminum wheel vehicle 1,596 mm (62.8 in)
19 inch aluminum wheel vehicle 1,596 mm (62.8 in)
Wheelbase 2,698 mm (106.2 in)

Weights
U.S.A. and Canada
SKYACTIV-G 2.0
Item Indication on display
GVWR (Gross Vehicle Weight Rating) 1,944 kg (4,286 lbs)
GAWR (Gross Axle Weight Rating) Front
981 kg (2,163 lbs)
Rear 966 kg (2,130 lbs)

SKYACTIV-G 2.5
Item Indication on display
2WD AWD
GVWR (Gross Vehicle Weight Rating) 2,048 kg (4,515 lbs) 2,106 kg (4,643 lbs)
GAWR (Gross Axle Weight Rating) Front
1,057 kg (2,330 lbs) 1,075 kg (2,370 lbs)
Rear 994 kg (2,191 lbs) 1,034 kg (2,280 lbs)

CX-5_8FN1-EA-16L_Edition1.indb 62016/12/12 10:07:39

9–7
Specifi cations
Specifi cations
Mexico
SKYACTIV-G 2.0
Item Indication on display
Without moonroof With moonroof
GVW (Gross Vehicle Weight) Total
2,087 kg (4,601 lbs)
Front 1,044 kg (2,302 lbs)
Rear 1,043 kg (2,299 lbs)
GAW (Permissible axle load) Front
1,045 kg (2,304 lbs) 1,050 kg (2,315 lbs)
Rear 1,095 kg (2,414 lbs) 1,105 kg (2,436 lbs)

SKYACTIV-G 2.5
Item Indication on display
2WD AWD
GVW (Gross Vehicle Weight) Total
2,103 kg (4,636 lbs) 2,143 kg (4,725 lbs)
Front 1,062 kg (2,341 lbs) 1,073 kg (2,366 lbs)
Rear 1,041 kg (2,295 lbs) 1,070 kg (2,359 lbs)
GAW (Permissible axle load) Front
1,060 kg (2,337 lbs) 1,070 kg (2,359 lbs)
Rear 1,110 kg (2,447 lbs) 1,150 kg (2,535 lbs)

Air Conditioner
The type of refrigerant used is indicated on a label attached to the ins\
ide of the engine
compartment. Check the label before recharging the refrigerant. Refer to Climate Control
System on page 5-4 .
Item Classifi cation
Refrigerant Type HFC134a (R-134a)

CX-5_8FN1-EA-16L_Edition1.indb 72016/12/12 10:07:39

9–11
Specifi cations
Personalization Features
Personalization Features
The following personalization features can be set or changed by the customer or an
Authorized Mazda Dealer. Consult an Authorized Mazda Dealer for details.
Additionally, some of the personalization features can be changed by the customer
depending on the feature.
Personalization features and settings which can be changed differ depending on the market
and specifi cation.
Settings Change Method

Settings can be changed by operating the center display screen.
A: Refer to Settings on page 5-124 .
B: Refer to Fuel Economy Monitor on page 4-86 .
C: Refer to Active Driving Display on page 4-28 .

Settings can be changed by operating the vehicle switches.
D: Refer to Auto Lock/Unlock Function on page 3-17 .
E: Refer to Transmitter on page 3-5 .
F: Refer to Locking, Unlocking with Request Switch (With the advanced keyless function) on page 3-14 .

Settings can be changed by an Authorized Mazda Dealer.
Item Feature Factory
Setting Available
Settings Settings
Change
Method


Safety
Smart City Brake
Support (SCBS)
(page 4-148 )
Smart Brake
Support (SBS)
(page 4-153 ) The system can be changed so that Smart
City Brake Support (SCBS)/Smart Brake
Support (SBS) does not operate.
*1
On On/Off A —

The distance at which the collision warning
activates can be changed. Mid Near/Mid/Far A —


The volume of the collision warning can be
changed. High High/Low/Off A —


CX-5_8FN1-EA-16L_Edition1.indb 112016/12/12 10:07:39

9–13
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings
Change
Method


Blind Spot
Monitoring (BSM)
(page 4-99 ) The system can be changed so that Blind
Spot Monitoring (BSM) does not operate.
*1
On On/Off A —

Warning beep volume
*2 High High/
Low/ Off A —

Distance
Recognition
Support System
(DRSS) (page
4-112 ) The system can be changed so that Distance
Recognition Support System (DRSS) does
not operate.
*1
On On/Off A —

The distance at which the vehicle ahead and
your vehicle indicated in the display fl ashes
in white can be changed. Near
Far/Medium/
Near A —


Traffi c Sign
Recognition
System (TSR)
*3
(page 4-105 ) The Traf
fi c Sign Recognition System (TSR)
can be set to inoperable.
*1 On On/Off A —

The warning pattern of the excessive speed
warning can be changed. Off Off/
Visual/
Audio & Visual A —


The activation timing for the excessive speed
warning can be changed.
0 0/ 5/ 10
A —

CX-5_8FN1-EA-16L_Edition1.indb 132016/12/12 10:07:40

9–15
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings
Change
Method


Daytime running
lights (page
4-56 ) Operational/non-operational
On On/Off — —


Auto headlight off
*5
(page 4-51 ) Time until headlights turn off
30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/ 0 seconds
*6 A —


Auto-light control
(page 4-51 ) Timing by which lights turn on
Medium Light/
Medium Light/ Medium/
Medium Dark/ Dark A —


High Beam Control
System (HBC)
(page 4-96 ) Operational/non-operational
*1
On On/Off A —

Adaptive Front
Lighting System
(AFS) (page
4-95 ) Operational/non-operational
*1
On On/Off A —

Lights-on
reminder
*7 (page
7-39 ) Warning beep volume
High High/Low/Off A —

Coming home light
(page 4-55 ) Time until headlights turn off
30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/ Off A —


Leaving home light
(page 4-55 ) Operational/non-operational
On On/Off A —


Turn signal
indicator (page
4-57 ) Beep volume
High High/Low A —


Three-fl ash turn
signal (page
4-58 ) Operational/non-operational
On On/Off A —


Rear window
defogger (page
4-62 ) The operation time for the rear window
defogger can be changed.
15 minutes 15 minutes/
Continuous
*8 — —

System
Language Language indicated in display English Depends on
market
*9 A —

Temperature Temperature unit indicated in display °F or °C °F/°C A —

Distance Distance unit indicated in display mi or km mi/km A —


CX-5_8FN1-EA-16L_Edition1.indb 152016/12/12 10:07:41

9–16
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings
Change
Method


Fuel Economy Monitor (page 4-86 )
Ending display Display/non-display Off On/Off B —


Fuel economy
resetting procedure Linkage/non-linkage with fuel economy reset
and trip meter A reset
Off On/Off B —


Active Driving Display (page 4-28 )
Display Setting can be changed so that the Active
Driving Display is not displayed.
On On/Off C —


The display height (up/down position) can
be changed. 0 13 steps up/
down from
initial setting
(total: 27 steps) C —


The method for adjusting the display
brightness (automatically/manually) can be
changed. AUTO
AUTO/
MANUAL C —


The standard brightness while automatic
adjustment is selected can be changed using
the brightness adjustment. 0 2 steps up/
down from
initial setting
(total: 5 steps) C —


The standard brightness while manual
adjustment is selected can be changed using
the brightness adjustment. 0 20 steps up/
down from
initial setting
(total: 41 steps) C —


The display angle can be changed. 0 3steps up/down
from initial setting
(total: 7steps) C —


Navigation
guidance Display/non-display
On On/Off C —


Street Information Display/non-display On-Demand Off/Always/
On-Demand C —


*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends that these systems remain On.
*2 Only the volume of the warning beep during Blind Spot Monitoring (BSM)\
operation can be changed. The volume of the warning beep during Rear Cross Traf fi c Alert (RCTA) operation cannot be changed.
*3 This system functions only when the navigation system is functioning.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 If the setting is changed to Off, the following operation is performed according to the headlight switc\
h position:
 At position: Headlights turn off immediately after the ignition is switched off.
 At any position other than : Headlights on/off conditions vary according to the headlight switch
position. Refer to Headlights on page 4-51 .
*6 When set to Off, the lights-on reminder is operable.
*7 The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates when
the auto headlight function is set to Off. Refer to Lights-On Reminder on page 7-39 .
CX-5_8FN1-EA-16L_Edition1.indb 162016/12/12 10:07:41

9–17
Specifi cations
Personalization Features
*8 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of
the rear window defogger has been changed to Continuous.
*9 Available only in display from the center display.



CX-5_8FN1-EA-16L_Edition1.indb 172016/12/12 10:07:42