Mercury Mountaineer 1997 s Owner's Guide

Maximum heating
Set mode control to, turn
temperature control to maximum
heat (red) and set fan speed
control to maximum.
Maximum cooling
Set mode control to MAX A/C, turn
temperature control to maximum
cool (blue) and set fan speed
control to maximum.
Ventilating with outside air
Set mode control to, turn the
temperature control to the desired
temperature and turn fan speed
control to desired position.
Maximum windshield defrosting
Set mode control to, turn
temperature control to maximum
heat (red) and set fan speed
control to maximum speed.
²To prevent air intake restriction,
remove any snow, ice or leaves
from the air intake area located
directly under the windshield.
Controls and features
21

STEERING COLUMN
CONTROLS
Positions of the ignition
ACCESSORYallows electrical
accessories such as radio and
wipers/washer to operate while the
engine is not running.
LOCKlocks the steering wheel
and gearshift lever.
OFFshuts off the ignition and
accessories and allows the
gearshift lever and steering wheel
to move.
ONtests the warning lights. The
key remains here when engine is
running.
STARTcranks the engine. The key
returns toONwhen released.
00P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +
H
H
L L020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
ON
START
LOCK
ACCESSORYOFF
Controls and features
22

Speed control
Do not shift the
transmission into N with
the speed control on.
Speed control maintains vehicle
speed automatically at or above
48km/h (30 mph) using the control
switches.
Press ON to turn speed control on.
SPEED
CONTwill illuminate in the
instrument cluster.
Press OFF to turn speed control
off. When turned off, the
previously programmed set speed
will be erased.
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L
OFF ON
020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
Controls and features
23

Press SET ACCEL (with speed
control turned ON) to set speed.
Hold SET ACCEL to increase
speed. Press and release once to
increase speed in 1.6 km/h (1
mph) increments.
Press COAST to decrease speed.
Press RSM to resume speed.
Depressing the brake pedal will
cancel the speed control.
Wiper/washer controls
Push the end to activate the
washer. Push end once for a single
wipe. Push and hold for a constant
cycle.
Turn the dial to adjust wiper
speed.
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L
RSM
SET
ACCEL
COAST
020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
Controls and features
24

Activating high beams
Push the lever forward to activate
the high beam lamps. Pull the
lever towards you to activate the
ªflash to passº function.
Push the lever down to activate
the left turn signal.
Push the lever up to activate the
right turn signal.
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
Controls and features
25

Overdrive control
Activating overdrive
OverdriveDis the normal drive
position for the best fuel economy
and will remain on until overdrive
is deactivated.
The overdrive function allows
automatic upshifts to 2nd, 3rd, and
4th gear.
Deactivating overdrive
Press the transmission control
switch on the end of the gearshift
lever. The transmission control
indicator light (TCIL)
O/D
OFFwill
illuminate on the instrument
cluster.
Transmission will operate in gears
1-3. To return to normal overdrive
mode, press the transmission
control switch again.
O/D
OFFwill turn
off.
When starting your vehicle, the
transmission will automatically
return to normal overdrive mode.
Deactivate overdrive when:
²driving with a heavy load
²driving in hilly areas
²additional engine braking is
desired
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
O/D
ON/OFF
Controls and features
26

Hazard flasher
Push the hazard flasher button.
The button will pop out and the
lamps will begin to flash.
To stop the flashers, push the
flasher button again.
Tilt steering
Never adjust the steering
column while the vehicle is
moving.
Pull the tilt steering lever towards
you and move the wheel to the
desired position.
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
Controls and features
27

OVERHEAD CONTROLS
Overhead console (if equipped)
The console includes:
²compass/temperature display
²map lamps
²storage compartment
²garage door opener actuator
²moon roof control (if equipped)
OPEN
GARAGE
LAMPMODELAMP
Controls and features
28

Compass/temperature display
Press the MODE button (with the
ignition key in the ON position) to
switch between the following
features:
²display off
²temperature in C (Celsius) and
compass
²temperature in F (Farenheit)
and compass
If the outside temperature is below
4ÉC (39ÉF), the word ICE will flash
alternately with the temperature
for one minute.
Compass accuracy can be affected
when driving by large buildings,
bridges, power lines, and powerful
antennas. Compass accuracy can
also be affected by magnetic
objects placed in or on the vehicle.
There are two types of compass
adjustments: zone and calibration.OPEN
GARAGE
LAMPMODELAMP
73¡ NW
Controls and features
29

Compass zone adjustment
1. Determine which zone of the
country you live in by referring to
the zone map.
2. Press and hold the MODE
button until VAR appears in the
display; then release. The display
will show the current zone number.
3. Press the MODE button until
the desired zone number appears.
Wait three seconds. The display
will flash and then return to
normal operation. Zone is now
updated.
Compass calibration adjustment
Perform this adjustment in an
open area free from steel
structures and high voltage lines.
1
2
3
4
5
6
7891011121314 15
LAMPMODELAMP
9 VAR
Controls and features
30