MITSUBISHI LANCER EVOLUTION IX 2005 Workshop Manual

2-1
SECTION 2
INDIVIDUAL PART
INSTALLATION POSITIONS
CONTENTS
Sensors ...................................................2-2
ECU ..........................................................2-6
Relays ......................................................2-9
Solenoid valves.....................................2-10Fusible links / Fuses ............................2-12
Inspection connectors /
Spare connectors .................................2-13
Ground cables.......................................2-14
Earths.....................................................2-15

PART INSTALLATION POSITIONS - SENSORS2-2
SENSORS
Note : The * symbol indicates that the sensor is also fitted on the right-hand side of the vehicle.

PART INSTALLATION POSITIONS - SENSORS2-3
Manifold
absolute
pressure sensor
Knock sensor
connector
Transmission caseThrottle position
sensor Inlet
manifold
Knock sensor
Vehicle speed
sensor
Crank angle sensor
connectorCrank angle
sensor Air flow sensor
Air temp.
sensor

INDIVIDUAL PART INSTALLATION POSITIONS - ECU2-4
O
2sensor
connector
Ext. air temp. sensor
Coolant
temperature sensor
Intake cam
position sensor
Exhaust cam
position sensor
(Vehicle not fitted with front passenger airbag)
O2 sensor
Front impact sensor
Steer sensor
Sunlight sensor
Heater water temperature sensor
Air thermo
sensor
Blower
ASSY
Cabin
temperature sensor

PART INSTALLATION POSITIONS - SENSOR2-5
Parking brake lever
Later G sensor
Front ABS sensor
connector
Rear ABS sensor
connectorHydraulic pressure
unit ASSY
Pressure sensor
Front/rear G sensor
Front ABS sensor
Parking brake
cableRear ABS sensor

PART INSTALLATION POSITIONS - ECU2-6
ECU
Note :
•The *1 symbol indicates that the ECU is also fitted on the right-hand side.
•The *2 symbol indicates that the ECU is also fitted at the rear door (LH, RH).

PART INSTALLATION POSITIONS - ECU2-7
Front ECU
Headlamp ASSY
(with built-in discharge ECU) Radiator fan
controller
Radiator ASSY
Column switch (column
ECU built into wiper
switch)
Immobiliser
ECU
Blower
unit
Blower pulse
controllerEngine ECU

PART INSTALLATION POSITIONS - ECU2-8
Glove box
Power window main
switch (built-in ECU)Sunroof motor ASSY
(built-in ECU)
Power window main
switch (built-in ECU)

PART INSTALLATION POSITIONS - RELAY2-9
RELAYS
Fuel pump relay 3
Electric pump relay
Hydraulic unit
A/C compressor relay
Engine control relay
Ignition coil relay
Starter relayCompressor fan relay (HI)
Compressor fan relay (LO)
Horn relay
Fog lamp relay
Radiator fan control relay
M3020000400514

PART INSTALLATION POSITIONS - SOLENOID VALVES2-10
SOLENOID VALVES
Fuel pump relay 1
Intercooler water
spray relay
Fuel pump relay 2Fuel pump relay 1
Blower relay
Power window relay
Oil feeder control
valveFuel pressure
solenoid valve
Purge control
solenoid valve