oil MITSUBISHI LANCER EVOLUTION X 2008 Repair Manual

GENERAL INFORMATION
FRONT SUSPENSION33-3
.
COIL SPRING
Caster2°40'
Kingpin inclination13°30'
Toe-in mm (in)1 (0.04)
Item Specification
ItemSpecification
DE, ESGT S
Wire diameter mm (in)14 (0.6)
Average outside diameter mm (in)159 (6.3)
Free length mm (in)5MT331 (13.0)316 (12.4)
CVT338 (13.3)322 (12.7)

GENERAL INFORMATION
REAR AXLE27-2
GENERAL INFORMATIONM2270000100478
The rear axle has the following features:
•The wheel bearing is a unit ball bearing (dou-
ble-row angular contact ball bearing) which incor-
porates the oil seals and is highly resistant to
thrust loads.
•The number of parts has been reduced by inte-
grating the magnetic encoder for ABS wheel
speed detection into the wheel bearing. -
cles with ABS>
SPECIFICATIONS
CONSTRUCTION DIAGRAM
ItemSpecification
Wheel bearingTy p eUnit ball bearing (double-row angular contact ball bearing)
AC606273
Rear hub
Oil seal Ball bearing
Magnetic
encoderAB

37-1
GROUP 37
POWER STEERING
CONTENTS
GENERAL INFORMATION . . . . . . . .37-2
STEERING WHEEL . . . . . . . . . . . . . .37-3
STEERING SHAFT AND COLUMN . .37-4
OIL PUMP . . . . . . . . . . . . . . . . . . . . . .37-6
STEERING GEAR . . . . . . . . . . . . . . . .37-7
OIL RESERVOIR . . . . . . . . . . . . . . . .37-8

GENERAL INFORMATION
POWER STEERING37-2
GENERAL INFORMATIONM2370000101003
FEATURES
A hydraulic power steering system has been adopted
to all models.
This steering system offers the following features:
•The support method of the steering gear to the
crossmember is realised by the left and right
internal bushings with inner cylinders. This sup
-
port method achieves higher rigidity of the steer-
ing gear and improves the steering feeling.
•Configuring the optimum flow characteristics and
gear valve feature improves the handling stability.
•Appropriate application of friction to the steering
gear cuts off the disturbance from the road sur
-
face and improves the stability during the
straight-ahead driving.
•Optimisation of the flexible tube in the high pres-
sure hose reduces the pump noise.
SPECIFICATIONS
ItemsSpecifications
Steering wheelTy p eThree-spoke type
Outside diameter mm (in)375 (14.7)
Maximum number of turns3.16
Steering columnColumn mechanismShock absorbing
mechanism and Tilt steering
mechanism
Power steering typeIntegral type (Engine
speed-dependent type)
Oil pumpTy p eVane type with fluid flow
amount control system
Basic discharge amount cm3/rev. (cu in/rev)8.1 (0.49)
Relief pressure MPa (psi)8.8 (1,276)
Reservoir typeSeparate type (Resin made)
Steering gearTy p eRack and pinion type
Stroke ratio (Rack stroke/Steering wheel
Maximum turning radius) mm/rev (in/rev)45.58 mm/rev (1.79 in/rev)
Rack stroke mm (in)144
Steering angleInner wheel40°50’
Outer wheel33°50’
Power steering fluidSpecified lubricantsGENUINE MITSUBISHI
POWER STEERING FLUID
Quantity dm3 (qt)Approximately 1.0 (1.06)

STEERING WHEEL
POWER STEERING37-3
CONSTRUCTION DIAGRAM
STEERING WHEELM2370001000761
The steering wheel is designed to improve operabil-
ity, safety and maintainability and has the following
features:
•Newly designed Three-spoke type has been
adopted. For DE and ES, the steering wheel
made of urethane has been adopted. For GTS,
the steering wheel made of genuine leather has
been adopted.
•Audio remote control, voice control, and cruise
control switches are available on some models.
•Sporty and thick type grip shape has been
adopted.
•Rigid core metal reduces steering wheel vibra-
tion.
•It incorporates an SRS airbag to protect the driver
in the event of a frontal collision.
•The airbag module is equipped with an inflator
that does not contain sodium azide.
•Optimisation of the airbag specifications reduces
the risk of injury to the passengers in a collision.
AC607284AB
Steering wheel Steering column
shaft assembly Pressure hose
assembly Oil reservoir
Suction hose
Oil pump assembly
Steering gear Return hose
Front axle crossmember
Heat protector
Pressure switch
AC607285
A
AAir bag module
Section A - A
Inflator
Steering wheel
audio remote control switch
Cruise control switch Steering wheel
voice control switch
Air bag module
AB

OIL PUMP
POWER STEERING37-6
Secondary collision
When the driver's body falls against the steering wheel via the
deployed air bag, the column bracket moves forward by
deforming the rivet pin of the one-way capsule, and simulta
-
neously the steering column assembly frees from the pin of col-
umn bracket to move forward and downwards.
OIL PUMPM2370004000373
The oil pump is a vane type with a fluid flow control
system which functions so the steering wheel turning
effort will be reduced at low engine speeds and
increase at higher speeds. The oil pump is essentially the same as the conven-
tional one in construction.
AC611053AB
AA
BB
One way
capsule
Section B - BSection A - A Column
bracketRivet pin
Column pipe Before collision
After collision
AC607645AB
A
AColumn
bracket
Column pipe
Pin Section A - A

OIL RESERVOIR
POWER STEERING37-8
OIL RESERVOIRM2370005000376
The resin oil reservoir is used to reduce weight. The oil reser-
voir is translucent and has fluid level marks (MAX and MIN
lines), facilitating inspection.
AC200365 AC
Scale
Cap
O-ring
Filter Oil reservoir
Return
Suction