light NISSAN 300ZX 1984 Z31 Clutch Workshop Manual

CLUTCH UNIT
Clutch Unit
-1 Slight burn or discoloration of Contact surface
with Clutch disc can be fixed by polishing with emery paper
mar drwe shaft does not adhere to clutch d!x
Clutch couer'l
SCL158
WARNING:
Clean away clutch disc dust using a dust collector
after cleaning with
a cloth. Do not use compressed
air.
CL-7

CLUTCH UNIT
Inspecting Clutch Cover
I
Inspecting Clutch Disc
Check clutch disc for runout, etc
Runout lam* of facq [a 115 mm 14 53 tnl from the hub center1 IO mm (0.039 in1
Maximum backlash of spit (at outer edge of dml 1.0 mm IO 039 in1
SCL153
Check clutch disc for wear
0 Measurn the depth of rim head More than 03 mm (0.012 mt SCL169
Check height and unevenness of diaphragm
spring after setting Tool.
Diaphragm spring height “A”:
37.5 - 39.5 mm (1.476 - 1.555 in)
Unevenness:
Less than 0.5 mm (0 020 in)
ST20050051 7
LST20050100 ST20050010
SCL155
Adjust unevenness of diaphragm spring with
Tool.
ST2005024,O
Check thrust rings for wear or damage by
shaking cover assembly up and down to listen
for chattering noise, or lightly hammering on
rivets for
a slightly cracked noise.
CL-8