check oil NISSAN 300ZX 1984 Z31 Rear Suspension Workshop Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 1984, Model line: 300ZX, Model: NISSAN 300ZX 1984 Z31Pages: 22, PDF Size: 0.62 MB
Page 14 of 22
REAR SUSPENSION
Stabilizer Bar
REMOVAL AND INSTALLATION
Remove stabilizer bar
SRA458
Final tightening should be carried out at curb
weight with
tires on ground
INSPECTION
Check stabilizer bar for deformation or cracks
Replace if necessary
Check rubber bushings for deterioration or
cracks Replace if necessary.
Shock Absorber
(Non - adjustable type)
REMOVAL AND INSTALLATION
Remove shock absorber upper end nut.
Disconnect shock absorber lower end.
SRA459
Final tightening should be carried out at curb
weight with tires on ground
INSPECTION
Check all rubber parts for wear, cracks, damage
or deformation Replace if necessary.
If oil leakage occurs, replace shock absorber
assembly.
Inspect threads for cracks or other damage
Replace if necessary
Inspect piston rod for cracks, deformation or
other damage Replace shock absorber
assembly if necessary
ASSEMBLY
Tape around piston rod
so as not to damage it
when tightening lock nut.
/-Washer
insulator cover
RA-14
Page 15 of 22
REAR SUSPENSION
Coil Spring
REMOVAL AND INSTALLATION
Jack up vehicle after setting spring compressor.
Then remove coil spring
When installing, correctly place coil spring in
the lower sprlng
seat rubber (Flat face of
sDrina
IS on top ) .-
Upper spring seat rubber
(Flat face)
Cob1 spring
!
~ower spring seat rubber SRA462
Suspen
REMOVAL AND INSTALLATION
I NSP ECTl ON
Check coil spring for yield, deformatlon or
cracks Replace
if necessary.
0 Check upper and lower spring seat rubbers for
wear, cracks or damage Replace if necessary
3n Arm
I/ I
SRA463
RA-15