NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual 300ZX 1984 Z31 NISSAN NISSAN https://www.carmanualsonline.info/img/5/572/w960_572-0.png NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual

Page 1 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual FRONT AXLE & 
FRONT SUSPENSION 
SECTION FA 
CONTENTS 
FRONT  AXLE AND FRONT  SUSPENSION .. . .. 
FRONT  AXLE - Wheel Hub . . . .  .. 
FRONT SUSPENSION . .  .  .. . 
FRONT SUSPENSION -Spring and Strut

Page 2 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual FRONT AXLE AND FRONT SUSPENSION 
Wheel  alignment Camber,  caster  and kingpin  inclination are preset at factory and cannot  be adjusted The  vehicle  requires only toe-in adjustments 
1-3 mm (0 04 -

Page 3 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual FRONT AXLE - Wheel Hub 
Baffle plate 
pj3 2 - 4 3 10 33.0 44,2 4 - 3 21 
f 
-Disc rotor 
Inner wheel bearing 
yAdwstlng  cap 
* Always replace once they have been removed N rn (kgm, ft-lb) 
J 
Lock wa

Page 4 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual FRONT AXLE - Wheel Hub 
Removal 
1 Remove brake caliper  assembly 
Brake 
hose must  not be disconnected  from brake 
caliper  assembly 
2 Remove  wheel hub with  disc brake  rotor and 
wheel  bearing

Page 5 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual FRONT AXLE - Wheel Hub 
Preload Adjustment 
I 
After wheel  bearing  has been  replaced  or front 
axle 
has been  reassembled be sure  to adjust  wheel 
bearing preload 
as described  below 
1. Befor

Page 6 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual When removing  each s~~pension part, check  wheel  allgnrnent  and adlust  If necessary 
Refer  to section MA for  front  axle and front suspension When innalling a bushing,  do not allow It to  prole

Page 7 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual FRONT SUSPENSION - Spring and Strut Assembly 
Removal and  Installation 
Remove tension rod nuts  and knuckle  arm 
fixing bolts 
Make sure brake hose is secure  and not twisted. 
Disassembly 
Avoid

Page 8 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual FRONT SUSPENSION - Spring and Strut Assembly 
I nspl 
Wash all parts, except  for nonmetallic  parts, 
clean  with suitable  solvent and dry with  com- 
pressed  air. 
a Blow dirt and dust off of nonm

Page 9 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual FRONT SUSPENSION - Spring and Strut Assembly 
c _. _. 
e 78i8.581 . 
: + 
0 
59 16,431 
Assc 
Before assembly,  keep away  from dust to prevent 
entry  of dust. 
Use "NISSAN GENUINE STRUT FLUID" or 
e

Page 10 of 24

NISSAN 300ZX 1984 Z31 Front Suspension Workshop Manual FRONT SUSPENSION - Spring and Strut Assembly 
Repeat  following procedures several times so that 
air  will  be thoroughly bled  from strut 
FA279 
FA280 
After  placing  spring in position  between u
Page:   1-10 11-20 21-30 next >