diagram NISSAN NOTE 2016 Service Repair Manual

EC-44
< SYSTEM DESCRIPTION >[HR16DE]
SYSTEM
*: When detecting a normal engine oil pressure, ECM turns OFF the oil pressure warning lamp.
FUEL FILLER CAP WARNING SYSTEM
FUEL FILLER CAP WARNING
SYSTEM : System DiagramINFOID:0000000012431326
FUEL FILLER CAP WARNING SYS TEM : System DescriptionINFOID:0000000012431327
INPUT/OUTPUT SIGNAL CHART
Input
*: This signal is sent to the ECM via the CAN communication line.
Output
*: This signal is sent to the combination meter via the CAN communication line.
SYSTEM DESCRIPTION
The fuel filler cap warning system alerts the driver to the prevention of the fuel filler being left uncapped and
malfunction occurrences after refueling, by turning ON the fuel filler cap warning display on the combination
meter.
ECM judges a refueled state, based on a fuel level signal transmitted from the combination meter.
When a very small leak is detected through the EVAP leak diagnosis performed after judging the refueled
state, ECM transmits a fuel filler cap warning display signal (request for display ON) to the combination meter
via CAN communication.
When receiving the signal, the combination meter turns ON the fuel filler cap warning display.
CAUTION:
Check fuel filler cap installation condition when the fuel filler cap warning display turns ON.
Reset Operation
Decrease in engine
oil pressure Engine speed Combination meter
Oil pressure warning lamp
Detection Less than 1,000 rpm
ON*
1,000 rpm or more ON
Unit/Sensor Input signal to ECM ECM function
EVAP control system pressure sensor Pressure in purge line
Fuel filler cap warning control
Combination meter Fuel level
Fuel filler cap warning reset signal
*
JSBIA0797GB
Unit
Output signal Actuator
ECM Fuel filler cap warning display signal
*Combination meter
Revision: August 2015 2016 Versa Note

cardiagn.com

SYSTEMEC-45
< SYSTEM DESCRIPTION > [HR16DE]
C
D
E
F
G H
I
J
K L
M A
EC
NP
O
The fuel filler cap warning lamp tunes OFF, according to any condition listed below:
• Reset operation is performed by operating the meter control switch on the combination meter. Refer to
MWI-
16, "Switch Name and Function".
- When the reset operation is performed, the combination meter transmits a fuel filler cap warning reset signal to ECM via CAN communication. ECM transmits a fuel filler cap warning display signal (request for display
OFF) to the combination meter via CAN communication. When receiving the signal, the combination meter
turns OFF the fuel filler cap warning display.
• EVAP leak diagnosis result is normal.
• Fuel refilled.
• DTC erased by using CONSULT.
NOTE:
MIL turns ON if a malfunction is detected in leak diagnosis results again at the trip after the fuel filler cap warn-
ing display turns ON/OFF.
AUTOMATIC SPEED CONTROL DEVICE (ASCD)
AUTOMATIC SPEED CONTROL DEVI CE (ASCD) : System DiagramINFOID:0000000012431328
AUTOMATIC SPEED CONTROL DEVICE (ASCD) : System DescriptionINFOID:0000000012431329
INPUT/OUTPUT SIGNAL CHART
*: This signal is sent to the ECM via the CAN communication line
BASIC ASCD SYSTEM
Automatic Speed Control Device (ASCD) allows a driver to keep vehicle at predetermined constant speed
without depressing accelerator pedal. Driver can be set the vehicle speed in the set speed range.
ECM controls throttle angle of electric thro ttle control actuator to regulate engine speed.
Operation status of ASCD is indicated in combination meter.
If any malfunction occurs in the ASCD system, it automatically deactivates the ASCD control.
JSBIA3607GB
SensorInput signal to ECM ECM functionActuator
ASCD steering switch ASCD steering switch operation
ASCD vehicle speed control Electric throttle control actuator
Brake pedal position switch
Brake pedal operation
Stop lamp switch
Clutch pedal position switch Clutch pedal operation
Transmission range switch Gear position
Park/neutral position (PNP) switch PNP signal
Combination meter Vehicle speed signal*
TCM Output shaft revolution signal*
Revision: August 2015 2016 Versa Note

cardiagn.com

ENGINE CONTROL SYSTEMEC-99
< WIRING DIAGRAM > [HR16DE]
C
D
E
F
G H
I
J
K L
M A
EC
NP
O
WIRING DIAGRAM
ENGINE CONTROL SYSTEM
Wiring DiagramINFOID:0000000012431347
ABBWA1627GB
Revision: August 2015
2016 Versa Note

cardiagn.com

EC-100
< WIRING DIAGRAM >[HR16DE]
ENGINE CONTROL SYSTEM
ABBWA1628GB
Revision: August 2015
2016 Versa Note

cardiagn.com

ENGINE CONTROL SYSTEMEC-101
< WIRING DIAGRAM > [HR16DE]
C
D
E
F
G H
I
J
K L
M A
EC
NP
O
ABBWA1564GB
Revision: August 2015
2016 Versa Note

cardiagn.com

EC-102
< WIRING DIAGRAM >[HR16DE]
ENGINE CONTROL SYSTEM
ABBWA1629GB
Revision: August 2015
2016 Versa Note

cardiagn.com

ENGINE CONTROL SYSTEMEC-103
< WIRING DIAGRAM > [HR16DE]
C
D
E
F
G H
I
J
K L
M A
EC
NP
O
AABWA0946GB
Revision: August 2015
2016 Versa Note

cardiagn.com

EC-104
< WIRING DIAGRAM >[HR16DE]
ENGINE CONTROL SYSTEM
ABBWA1630GB
Revision: August 2015
2016 Versa Note

cardiagn.com

ENGINE CONTROL SYSTEMEC-105
< WIRING DIAGRAM > [HR16DE]
C
D
E
F
G H
I
J
K L
M A
EC
NP
O
ABBIA3052GB
Revision: August 2015
2016 Versa Note

cardiagn.com

EC-106
< WIRING DIAGRAM >[HR16DE]
ENGINE CONTROL SYSTEM
ABBIA3053GB
Revision: August 2015
2016 Versa Note

cardiagn.com