engine coolant NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual PATROL 1998 Y61 / 5.G NISSAN NISSAN https://www.carmanualsonline.info/img/5/618/w960_618-0.png NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual

Page 1 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual ENGINE LUBRICATION &
COOLING SYSTEMS
SECTION
LC
CONTENTS
PRECAUTIONS AND PREPARATION............................1
Liquid Gasket Application Procedure ..........................1
Special Service Tools

Page 2 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual Liquid Gasket Application Procedure
a. Use a scraper to remove all traces of old liquid gasket from
mating surfaces and grooves. Also, completely clean any oil
from these areas.
b. Apply a continuous

Page 5 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual 3. Install pressure gauge.
4. Start engine and warm it up to normal operating temperature.
5. Check oil pressure with engine running under no-load.
Engine
rpmApproximate discharge pressure
kPa (bar, k

Page 8 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual Oil Cooler
REMOVAL AND INSTALLATION
Install oil cooler as shown in the ®gure.
INSPECTION
1. Check oil cooler element and bracket for cracks.
2. Check coolant inlet of oil cooler for clogging by blowi

Page 9 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual When installing oil jet, align oil jets boss with hole on cylin-
der block.
Oil jet bolt:
:30-40Nzm (3.1 - 4.1 kg-m, 22 - 30 ft-lb)
Turbocharger
+Before removing water tube, drain coolant ®rst.
+Be

Page 11 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual Pull the negative pressure valve to open it. Check that it closes
completely when released.
CHECKING COOLING SYSTEM FOR LEAKS
Apply pressure to the cooling system by means of a tester to check
for lea

Page 14 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual +Cut off tip of nozzle of liquid gasket at point shown in ®gure.
+Use Genuine Liquid Gasket or equivalent.
+Apply a continuous bead of liquid gasket to mating surface of
water inlet.
a. Be sure diame

Page 15 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual Radiator
REMOVAL AND INSTALLATION
1. Remove under cover.
2. Drain coolant from radiator drain plug.
3. Disconnect radiator upper and lower hoses.
4. Remove radiator lower shroud.
5. Disconnect reservo

Page 21 of 22

NISSAN PATROL 1998 Y61 / 5.G Engine Lubrication And Cooling System Workshop Manual Overheating Cause Analysis
Symptom Check items
Cooling
system parts
malfunctionPoor heat transferWater pump malfunction Worn or loose drive belt
Ð Thermostat stuck closed Ð
Damaged ®nsDust contamin