dlk 222 NISSAN TEANA 2008 Service Manual

DLK-5
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P HOOD ASSEMBLY : Removal and Installation .....
192
HOOD ASSEMBLY : Adjustment ..........................193
HOOD HINGE ..........................................................193
HOOD HINGE : Exploded View ............................194
HOOD HINGE : Removal and Installation .............194
HOOD SUPPORT ROD ...........................................194
HOOD SUPPORT ROD : Exploded View .............195
HOOD SUPPORT ROD : Removal and Installa-
tion ........................................................................
195
RADIATOR CORE SUPPORT .........................196
Exploded View ......................................................196
Removal and Installation .......................................196
FRONT FENDER ..............................................199
Exploded View ......................................................199
Removal and Installation .......................................199
FRONT DOOR ..................................................201
DOOR ASSEMBLY .................................................201
DOOR ASSEMBLY : Exploded View ....................201
DOOR ASSEMBLY : Removal and Installation .....202
DOOR ASSEMBLY : Adjustment ..........................203
DOOR STRIKER ......................................................203
DOOR STRIKER : Exploded View ........................203
DOOR STRIKER : Removal and Installation ........204
DOOR HINGE ..........................................................204
DOOR HINGE : Exploded View ............................204
DOOR HINGE : Removal and Installation .............204
DOOR CHECK LINK ...............................................205
DOOR CHECK LINK : Exploded View ..................205
DOOR CHECK LINK : Removal and Installation ..205
REAR DOOR ....................................................207
DOOR ASSEMBLY .................................................207
DOOR ASSEMBLY : Exploded View ....................207
DOOR ASSEMBLY : Removal and Installation .....208
DOOR ASSEMBLY : Adjustment ..........................209
DOOR STRIKER ......................................................209
DOOR STRIKER : Exploded View ........................209
DOOR STRIKER : Removal and Installation ........210
DOOR HINGE ..........................................................210
DOOR HINGE : Exploded View ............................210
DOOR HINGE : Removal and Installation .............210
DOOR CHECK LINK ...............................................211
DOOR CHECK LINK : Exploded View ..................211
DOOR CHECK LINK : Removal and Installation ..211
TRUNK LID .......................................................213
TRUNK LID ASSEMBLY .........................................213
TRUNK LID ASSEMBLY : Exploded View ............213
TRUNK LID ASSEMBLY : Removal and Installa-
tion ........................................................................
214
TRUNK LID ASSEMBLY : Adjustment ..................215
TRUNK LID STRIKER .............................................215
TRUNK LID STRIKER : Exploded View ................216
TRUNK LID STRIKER : Removal and Installation ..216
TRUNK LID HINGE ..................................................216
TRUNK LID HINGE : Exploded View ....................217
TRUNK LID HINGE : Removal and Installation .....217
TRUNK LID STAY ....................................................217
TRUNK LID STAY : Exploded View ......................218
TRUNK LID STAY : Removal and Installation .......218
TRUNK LID WEATHER-STRIP ...............................219
TRUNK LID WEATHER-STRIP : Exploded View ..219
TRUNK LID WEATHER-STRIP : Removal and In-
stallation ................................................................
219
HOOD LOCK ...................................................220
Exploded View .......................................................220
Removal and Installation .......................................220
Inspection ..............................................................221
FRONT DOOR LOCK .....................................222
DOOR LOCK ............................................................222
DOOR LOCK : Exploded View ..............................222
DOOR LOCK : Removal and Installation ...............222
INSIDE HANDLE ......................................................223
INSIDE HANDLE : Exploded View ........................223
INSIDE HANDLE : Removal and Installation .........223
OUTSIDE HANDLE ..................................................223
OUTSIDE HANDLE : Exploded View ....................224
OUTSIDE HANDLE : Removal and Installation .....224
REAR DOOR LOCK ........................................227
DOOR LOCK ............................................................227
DOOR LOCK : Exploded View ..............................227
DOOR LOCK : Removal and Installation ...............227
INSIDE HANDLE ......................................................227
INSIDE HANDLE : Exploded View ........................228
INSIDE HANDLE : Removal and Installation .........228
OUTSIDE HANDLE ..................................................228
OUTSIDE HANDLE : Exploded View ....................229
OUTSIDE HANDLE : Removal and Installation .....229
TRUNK LID LOCK ..........................................231
Exploded View .......................................................231
Removal and Installation .......................................231
FUEL FILLER LID OPENER ...........................232
Exploded View .......................................................232
Removal and Installation .......................................232
DOOR SWITCH ...............................................234
Exploded View .......................................................234
Removal and Installation .......................................234

DLK-38
< FUNCTION DIAGNOSIS >[WITH INTELLIGENT KEY SYSTEM]
TRUNK OPEN FUNCTION
TRUNK OPEN FUNCTION
System DiagramINFOID:0000000003853925
System DescriptionINFOID:0000000003853926
TRUNK LID OPENER OPERATION
When trunk lid opener switch is ON, BCM opens trunk opener actuator.
BCM can open trunk lid opener actuator when
 vehicle speed is less than 5 km/h (3MPH)
 vehicle security system is in the disarmed or pre-armed phase
BCM does not open trunk lid opener actuator when
 vehicle speed is more than 5 km/h (3MPH)
 vehicle security system is in the armed or alarm phase
 Intelligent Key is inserted in key slot
Component Parts LocationINFOID:0000000003853927
JMKIA2377GB
1. BCM M118, M119, M120, M121,
M1222. Trunk lid opener switch M25 3. Trunk lid lock assembly
(trunk lid opener actuator) T5
A. Behind the combination meter
JMKIA2572ZZ

DLK-62
< COMPONENT DIAGNOSIS >[WITH INTELLIGENT KEY SYSTEM]
DOOR LOCK ACTUATOR
PASSENGER SIDE : Description
INFOID:0000000003794851
Locks/unlocks the door with the signal from BCM.
PASSENGER SIDE : Component Function CheckINFOID:0000000003794852
1.CHECK FUNCTION
1. Use CONSULT-III to perform Active Test (“DOOR LOCK”).
2. Touch “ALL LCK” or “ALL UNLK” to check that it works normally.
Is the inspection result normal?
YES >> Door lock actuator is OK.
NO >> Refer to DLK-62, "
PASSENGER SIDE : Diagnosis Procedure".
PASSENGER SIDE : Diagnosis ProcedureINFOID:0000000003794853
1.CHECK DOOR LOCK ACTUATOR OUTPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect front door lock assembly (passenger side).
3. Check voltage between front door lock assembly (passenger side) harness connector and ground.
Is the inspection result normal?
YES >> Replace front door lock assembly (passenger side). Refer to DLK-222, "DOOR LOCK : Removal
and Installation".
NO >> GO TO 2.
2.CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector and front door lock assembly (passenger side) har-
ness connector.
3. Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES >> Replace BCM. Refer to BCS-78, "Removal and Installation".
NO >> Repair or replace harness.
REAR LH
REAR LH : DescriptionINFOID:0000000003794854
Locks/unlocks the door with the signal from BCM.
(+)
(–) ConditionVoltage (V)
(Approx.) Front door lock assembly (passenger side)
Connector Terminal
D481
GroundDoor lock and
unlock switchUNLOCK 0 → Battery voltage → 0
2LOCK0 → Battery voltage → 0
BCM Front door lock assembly (passenger side)
Continuity
Connector Terminal Connector Terminal
M1195
D481
Existed
82
BCM
GroundContinuity
Connector Terminal
M1195
Not existed
8

INTELLIGENT KEY
DLK-85
< COMPONENT DIAGNOSIS >[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
4. Align the tips of the upper and lower parts, and then push them
together until it is securely closed.
CAUTION:
 When replacing battery, keep dirt, grease, and other for-
eign matter off the electrode contact area.
 After replacing the battery, check that all Intelligent Key
functions work normally.
Is the inspection result normal?
YES >> Intelligent Key is OK.
NO >> Check remote keyless entry receiver. Refer to DLK-67,
"ComponentFunctionCheck".
Special Repair RequirementINFOID:0000000003794897
Refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.
PIIB6222E

DLK-222
< ON-VEHICLE REPAIR >[WITH INTELLIGENT KEY SYSTEM]
FRONT DOOR LOCK
FRONT DOOR LOCK
DOOR LOCK
DOOR LOCK : Exploded ViewINFOID:0000000003813426
DOOR LOCK : Removal and InstallationINFOID:0000000003813427
REMOVAL
1. Remove front door finisher. Refer to INT-30, "DRIVER SIDE : Removal and Installation" (driver side) or
INT-33, "
PASSENGER SIDE : Removal and Installation" (passenger side).
2. Remove front door glass. Refer to GW-17, "
Removal and Installation".
3. Remove front door module assembly. Refer to GW-20, "
Removal and Installation".
4. Remove outside handle and outside handle bracket. Refer to DLK-224, "
OUTSIDE HANDLE : Removal
and Installation".
5. Remove door lock assembly TORX bolts.
6. Disconnect door lock actuator connector, and then remove door lock assembly.
7. Remove key rod from door lock assembly.
INSTALLATION
Install in the reverse order of removal.
1. Outside handle 2. Door key cylinder assembly (driver
side)
Outside handle escutcheon (passen-
ger side)3. Rear gasket
4. TORX bolt 5. Key rod (driver side) 6. Door lock assembly
7. Inside handle escutcheon 8. Inside handle 9. Seal
10. Outside handle bracket 11. Front gasket
: Vehicle front
Refer to GI-4, "
Components" for symbols in the figure.
JMKIA2386GB

INTELLIGENT KEY BATTERY
DLK-245
< ON-VEHICLE REPAIR >[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
INTELLIGENT KEY BATTERY
Removal and InstallationINFOID:0000000003795148
1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
2. Insert a flat-bladed screwdriver (A) wrapped with a cloth into the
slit of the corner and twist it to separate the upper part from the
lower part.
CAUTION:
 Never touch the circuit board or battery terminal.
 The key fob is water-resistant. However, if it does get wet,
immediately wipe it dry.
3. Replace the battery with new one.
4. Align the tips of the upper and lower parts, and then push them
together until it is securely closed.
CAUTION:
 When replacing battery, keep dirt, grease, and other for-
eign matter off the electrode contact area.
 After replacing the battery, check that all Intelligent Key
functions work normally.
PIIB6221E
Battery replacement :Coin-type lithium battery
(CR2025)
PIIB6222E

MA-42
< ON-VEHICLE MAINTENANCE >
BODY MAINTENANCE
BODY MAINTENANCE
LOCKS, HINGES AND HOOD LATCH
LOCKS, HINGES AND HOOD LATCH : LubricatingINFOID:0000000003858318
For hood and hood lock illustration.
 Hood: Refer to DLK-191, "
HOOD ASSEMBLY : Exploded View".
 Hood lock control: Refer to DLK-220, "
Exploded View".
For door and door lock illustration.
 Front door: Refer to DLK-201, "
DOOR ASSEMBLY : Exploded View".
 Front door lock: Refer to DLK-222, "
DOOR LOCK : Exploded View".
 Rear door: Refer to DLK-207, "
DOOR ASSEMBLY : Exploded View".
 Rear door lock: Refer to DLK-227, "
DOOR LOCK : Exploded View".
For trunk lid and trunk lid lock illustration.
 Trunk lid: Refer to DLK-213, "
TRUNK LID ASSEMBLY : Exploded View".
 Trunk lid lock: Refer to DLK-231, "
Exploded View".
SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS
SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS : Inspection
INFOID:0000000003858319
For front seat belt illustration. Refer to SB-5, "SEAT BELT RETRACTOR : Exploded View".
For rear seat belt illustration. Refer to SB-10, "
SEAT BELT RETRACTOR : Exploded View".
CAUTION:
 After any collision, inspect all seat belt assemblies, including retractors and other attached hard-
wares (I.e. anchor bolt, guide rail set). Nissan recommends to replace all seat belt assemblies in use
during a collision, unless not damaged and properly operating after minor collision.
Also inspect seat belt assemblies not in use during a collision, and replace if damaged or improperly
operating.
Seat belt pre-tensioner should be replaced even if the seat belts are not in use during a frontal colli-
sion where the driver and passenger air bags are deployed.
 If any component of seat belt assembly is questionable, do not repair.
Replace as seat belt assembly.
 If webbing is cut, frayed, or damaged, replace belt assembly.
 Never oil tongue and buckle.
 Use a genuine NISSAN seat belt assembly.
For details, refer to SB-3, "
SEAT BELT RETRACTOR : Inspection" , SB-8, "SEAT BELT RETRACTOR :
Inspection" in SB section.
 Check anchors for loose mounting
 Check belts for damage
 Check retractor for smooth operation
 Check function of buckles and tongues when buckled and released
BODY CORROSION
BODY CORROSION : Checking Body CorrosionINFOID:0000000003858320
Visually check body panels for collision damage (scratches, chipping, rubbing, etc.) or damage to the anti-cor-
rosion materials. In particular, check the following locations.
HEMMED PANELS
Hood front end, door lower end, trunk lid rear end, etc.
PA N E L J O I N T
Side sill of rear fender and center pillar, rear wheel housing of rear fender, around strut tower in engine com-
partment, etc.
PA N E L E D G E
Trunk lid opening, sunroof opening, fender wheel-arch flange, fuel filler lid flange, around holes in panel, etc.
PARTS CONTACT
Waist moulding, windshield moulding, bumper, etc.