ignition Peugeot 307 2002 User Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2002, Model line: 307, Model: Peugeot 307 2002Pages: 128, PDF Size: 1.82 MB
Page 35 of 128

GENERAL FUNCTIONSOn/off With the ignition key in the accessories or ignition position, press button Mto switch the set on or off.
The set can operate for 30 minutes without the vehicle ignition being switched on.
Anti-theft systemThe audio system is coded in such a way that it can operate only on your vehicle. It would not function if fitted to another vehicle. The anti-theft system is automatic and requires no action on your part. ADJUSTING THE VOLUME Press button Oto increase the volume or button Nto decrease it.
Continuous pressure on buttons Oand Nallows a gradual adjustment of the volume.
AUDIO SETTINGS Press button Gseveral times in succession to access the bass (BASS), treble (TREB), loudness (LOUD),
fader ( FAD), balance (BAL)and automatic volume correction.
Exit from audio mode is automatic after a few seconds without pressing any button, or by pressing button G
after configuration of the automatic volume correction. Note : bass and treble settings are specific to each source. It is possible to set them differently for radio,
cassette (RB3), CD (RD3) and CD changer.
YOUR 307 IN DETAIL
40
Page 59 of 128

Never drive with the head restraints remo-ved; they should be inplace and correctlyadjusted.
5. Front heated seats switch*Press the switch. The temperatu-
re is controlled automatically. Pressing the switch again stops operation. Note : the command for activation
of the heating of the seat(s) remains memorised for twominutes after the ignition has been
switched off.
6. Front armrests* These can be folded down andare removable.
To remove the armrest, press the button located between the arm-rest and the side of the seat andpull it.
7. Front head restraint height and angle* adjustment
To raise or lower the restraint, pull it forwards, sliding it at thesame time. The angle of the head restraint can also be adjusted*.
To remove the head restraint, place it in the top position, lift thelug using a coin and pull it for-wards and upwards at the sametime. To put it back in position, locatethe stems of the restraint in theholes, taking care to keep themin line with the seat back.
Active seat back (front seat) This possesses a device to prevent 'whiplash'. When there is an impact from the
rear, the action of the body on theseat back forces the head restraintforwards and upwards, preventingthe head being thrown backwards.
8. Storage drawers* There is a storage drawer under each front seat.
Ð To open it, lift and pull.
Ð To take it out, open it to its full extent, press the ends of the slides
and lift it, then remove it completely.
Do not place heavy objects in thedrawers. Under the seat on the passenger side, the layout of the floor allows forstorage of a first aid kit and a war-ning triangle (small version).
* According to specification. REAR HEAD RESTRAINTS These have a high position for when they are in use and a low position forwhen they are stored.
To lower the head restraints, press the lug. The head restraints are removable.
To remove them, pull upwards as far as the stop then press the lug.
YOUR 307 IN DETAIL
59
The adjustment is correct when the upper edge of thehead restraint is level withthe top of the head.
Page 60 of 128

Never drive with the head restraints remo-ved; they should be inplace and correctlyadjusted.
5. Front heated seats switch*Press the switch. The temperatu-
re is controlled automatically. Pressing the switch again stops operation. Note : the command for activation
of the heating of the seat(s) remains memorised for twominutes after the ignition has been
switched off.
6. Front armrests* These can be folded down andare removable.
To remove the armrest, press the button located between the arm-rest and the side of the seat andpull it.
7. Front head restraint height and angle* adjustment
To raise or lower the restraint, pull it forwards, sliding it at thesame time. The angle of the head restraint can also be adjusted*.
To remove the head restraint, place it in the top position, lift thelug using a coin and pull it for-wards and upwards at the sametime. To put it back in position, locatethe stems of the restraint in theholes, taking care to keep themin line with the seat back.
Active seat back (front seat) This possesses a device to prevent 'whiplash'. When there is an impact from the
rear, the action of the body on theseat back forces the head restraintforwards and upwards, preventingthe head being thrown backwards.
8. Storage drawers* There is a storage drawer under each front seat.
Ð To open it, lift and pull.
Ð To take it out, open it to its full extent, press the ends of the slides
and lift it, then remove it completely.
Do not place heavy objects in thedrawers. Under the seat on the passenger side, the layout of the floor allows forstorage of a first aid kit and a war-ning triangle (small version).
* According to specification. REAR HEAD RESTRAINTS These have a high position for when they are in use and a low position forwhen they are stored.
To lower the head restraints, press the lug. The head restraints are removable.
To remove them, pull upwards as far as the stop then press the lug.
YOUR 307 IN DETAIL
59
The adjustment is correct when the upper edge of thehead restraint is level withthe top of the head.