Peugeot RCZ 2015 Owner's Guide
Manufacturer: PEUGEOT, Model Year: 2015, Model line: RCZ, Model: Peugeot RCZ 2015Pages: 292, PDF Size: 7.89 MB
Page 31 of 292

29
RCZ_en_Chap01_controle-de-marche_ed01-2015
TRIP COMPUTER , A FEW d EFINITIONS
Range
(miles or km)
The distance which can still be travelled with the fuel
remaining in the tank (related to the average fuel consumption over the\
last few miles (kilometres) travelled).
This value may vary following a change in the style of driving
or
the
relief, resulting in a significant change in the current fuel
consumption.
If dashes are displayed continuously while driving in place of the
digits,
contact a PEUGEOT
dealer or a qualified workshop.
This function is only displayed from 20 mph (30 km/h).
When the range falls below 20 miles (30 km), dashes are displayed.
After
filling
with at least 5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).
Current fuel consumption
(mpg or l/100 km or km/l)
Calculated over the last few seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
Calculated since the last trip computer reset.
Average speed
(mph or km/h)
Calculated since the last trip computer reset.
distance travelled
(miles or km)
Calculated since the last trip computer reset.
1/
MONITORING
Page 32 of 292

30
RCZ_en_Chap01_controle-de-marche_ed01-2015
MONOCHROME SCREEN C (WITH
P EUGEOT
C
ONNECT
S
OUND (RD5))
dISPLAYS IN THE SCREEN
Displays according to context:
-
time,
-
date,
- ambient
temperature (the value displayed flashes if there is a risk of
ice),
-
visual parking assistance,
-
audio functions,
-
alert messages,
-
the display and vehicle equipment settings menus.
CONTROLS
From the control panel of your PEUGEOT Connect Sound (RD5), you
can:
F
press the
"MENU" button for access to the main menu,
F
press the "
5" or "6" buttons to scroll through the items on the
screen,
F
press the
"MO d E" button to change the permanent application
(audio source, telephone...),
F
press the "
7" or "8" buttons to change a setting value,
F
press the
"OK" button to confirm,
or
F
press the
"Back" button to abandon the operation in progress.
Page 33 of 292

31
RCZ_en_Chap01_controle-de-marche_ed01-2015
MAIN MENU
F Press the "MENU" button to gain access to the main menu:
-
audio functions,
-
vehicle diagnostics,
-
personalisation-configuration,
-
telephone (Bluetooth system).
F
Press the "
5" or "6" buttons to select the menu required, then
confirm
by pressing the
"OK"
button.
"AUdIO FUNCTIONS" MENU
With the PEUGEOT Connect Sound (RD5) switched on, once this menu
has been selected you can activate or deactivate the functions linked
with use of the radio (RDS, REG, RadioText) or the CD (introscan,
shuffle, CD repeat).
For more information on the "Audio functions" application, refer to the \
"PEUGEOT
Connect Sound (RD5)" part of the "Audio equipment and
telematics" section.
"dIAGNOSIS VEHICLE" MENU
Once this menu has been selected, you can consult information
concerning the status of the vehicle.
Alert log
This summarises the active warning messages, displaying them in
succession on the multifunction screen.
F
On the "
d iagnosis vehicle" menu, select the following application:
F
Press the
"MENU" button to gain access to the main menu.
F
Press the arrows, then the
"OK" button to select the " d iagnosis
vehicle" menu.
1/
MONITORING
Page 34 of 292

32
RCZ_en_Chap01_controle-de-marche_ed01-2015
* Depending on version.
** Depending on country of sale.
"PERSONALISATION-CONFIGURATION"
MENU
Once this menu has been selected, you can gain access to the
following functions:
- define the vehicle parameters,
- display
configuration,
-
choice of language.
define the vehicle parameters*
Once this menu has been selected, you can activate or deactivate the
following equipment:
-
selective unlocking (refer to the "Access" section),
-
guide-me-home lighting (refer to the "V
isibility" section),
-
interior mood lighting (refer to the "Ease of use and comfort" section)\
,
-
daytime running lamps** (refer to the "V
isibility" section),
-
rear parking sensors (refer to the "Driving" section). Example: setting of the duration of the guide-me-home lighting
F
Press the "
5" or "6" buttons, then the "OK" button to select the
menu required.
F
Press the "
5" or "6" buttons, then the "OK" button to select the
"Guide-me-home headlamps" line.
F
Press the "
7" or "8" buttons to set the value required (15, 30 or
60 seconds), then press the "OK"
button to confirm.
F Press the " 5" or "6" buttons, then the "OK" button to select the
"OK"
box and confirm or press the
"Back" button to cancel.
Page 35 of 292

33
RCZ_en_Chap01_controle-de-marche_ed01-2015
With the PEUGEOT Connect Sound (RD5) switched on, once this menu
has been selected you can configure your Bluetooth hands-free system
(pairing), consult the various telephone directories (calls log, serv\
ices...)
and manage your communications (pick up, hang up, call waiting,
secret mode...).
For more information on the "T
elephone" application, refer to the
"PEUGEOT
Connect Sound (RD5)" part of the "Audio equipment and
telematics" section.
"TELEPHONE" MENUdisplay configuration
Once this menu has been selected, you have access to the following
settings:
-
brightness-video setting,
-
date and time setting,
-
choice of units.
Choice of language
Once this menu has been selected, you can change the language
used by the display (Deutsch, English, Espanol, Français, Italiano, \
Nederlands, Portugues, Portugues-Brasil, Türkçe**). As
a safety measure, configuration of the multifunction screen by
the driver must only be done when stationary
.
Setting the date and time
F
Press the "
7" or "8" button to display the "Display configuration"
menu, then the
"OK" button.
F
Press the "
5" or "6" button to select the "Adjust date and time"
line, then the "OK" button.
F
Press the "
7" or "8" button to select the setting to modify. Confirm
by pressing the
"OK"
button then modify the setting and confirm
again
to save the modification.
F Adjust the settings one by one, confirming with the
"OK"
button.
F
Press the "
5" or "6" button, then the "OK" button to select the
"OK" box and confirm, or the "Back"
button to cancel.
** According to country of sale.
1/
MONITORING
Page 36 of 292

34
RCZ_en_Chap01_controle-de-marche_ed01-2015
RETRACTABLE COLOUR SCREEN (WITH
P EUGEOT
C
ONNECT
N
AVIGATION (RT6))
dISPLAYS IN THE SCREEN
Displays according to context:
-
time,
-
date,
-
altitude,
- ambient
temperature (the value displayed flashes if there is a risk of
ice),
-
visual parking sensor information,
-
audio functions,
-
telephone and contacts information,
-
satellite navigation system information,
-
alert messages,
-
menus for settings of the screen, navigation system and vehicle
equipment. From the
P EUGEOT
Connect Navigation (R
T6) control panel, to select
one of the applications:
F
press the dedicated
"RA
d IO", "MUSIC", "NAV", "TRAFFIC",
"PHONE" or "SETUP" button for access to the corresponding
menu,
F
turn dial
A to select a function, an item in a list,
F
press button
B to confirm the selection,
or
F
press the
"Back" button to abandon the current operation and
return to the previous display.
For more information on these applications, refer to the "P
EUGEOT
Connect
Navigation (RT6)" part in the "Audio equipment and telematics"
section.
CONTROLS
For operation of the retractable screen (opening, closing,
adjustment of the position, etc.), refer to the "Access to the
retractable screen" section.
Page 37 of 292

35
RCZ_en_Chap01_controle-de-marche_ed01-2015
"SETUP" MENU
F Press the "SETUP" button to gain access to the configuration menu:
- "Display configuration",
-
"V
oice synthesis",
-
"Choice of language",
-
"V
ehicle parameters",
-
"Alert log".
As
a safety measure, configuration of the multifunction screen by
the driver must only be done when stationary
.
display configuration
This menu allows you to choose a colour scheme for the screen, to
adjust the brightness, set the date and time and choose the units for
distance (km or miles), fuel consumption (l/100 km, mpg or km/l) and\
temperature (°Centigrade or °Fahrenheit).
Voice synthesis
This men allows you to adjust the volume for navigation instructions and\
to choose the type of voice (male or female).
* Depending on version.
** According to country of sale.
Choice of language
This menu allows you to choose the language used by the screen
(French, English, Italian, Portuguese, Spanish, German, Dutch, Turkish,
Polish, Russian).
Vehicle parameters*
This menu allows you to activate or deactivate certain driving and
comfort equipment, arranged by category:
-
Access to the vehicle
●
Plip action (selective unlocking of the driver's door; refer to the
"Access" section),
-
Parking sensors
-
Lighting configuration (see the "Visibility" section) :
● Duration
of the guide-me-home lighting,
● Directional
headlamps (main/additional directional lighting),
● Mood
lighting (Interior mood lighting),
● Daytime
running lamps**.
Alert log
It lists the active alerts by displaying their associated messages in tu\
rn.
Setting the date and time
F
Press "
SETUP".
F Select
"Display
configuration"
and
confirm.
F Select
"Set
date
and
time"
and
confirm.
You can select "Synchronise the minutes with GPS ", so that the
minutes are adjusted automatically by satellite reception. F Select
the setting to modify. Confirm by pressing "
OK", then adjust
the setting and modify again.
F
Adjust the settings one by one.
F
Select "
OK" in the screen then confirm to save the setting.
1/
MONITORING
Page 38 of 292

36
RCZ_en_Chap01_controle-de-marche_ed01-2015
You can adjust the angle of the screen to one of four defined positions, by repeated presses on the front or back of the control B
. The position
of the screen is memorised on closing.
Adjusting the angle of the screen
The screen opens automatically when the ignition is switched on. It
closes automatically three seconds after switching off the ignition if the
audio and telematics system is switched off.
ACCESS TO THE RETRACTABLE SCREEN
You can open or close the screen at any time, with the ignition on, using\
control A.
-
Press button
A: the screen folds.
-
Press button
A again: the screen opens again.
If you have closed the screen, it will open again automatically:
-
on switching on the audio and navigation system (unless it
had been closed manually while the system was in operation),
-
when an outgoing telephone call is made,
-
when a voice command is given,
-
when a warning message linked with the ST
OP warning lamp
is displayed (P
EUGEOT
Connect Navigation (R
T6)).
Page 39 of 292

37
RCZ_en_Chap02_ouvertures_ed01-2015
REMOTE CONTROL KEY
System which permits central unlocking or locking of the vehicle using
the lock or from a distance. It is also used to locate and start the
vehicle, as well as providing protection against theft.
UNLOCKING THE VEHICLE
Unfolding the key
F First press this button to unfold the key .
Complete unlocking using the remote control
F Press the open padlock to unlock the vehicle.
Selective unlocking using the remote control
F Press the open padlock once to unlock the driver's door
and
the fuel filler flap only.
F
Press the open padlock again to unlock the passenger's door and
the boot.
Selective unlocking using the key
F Turn the key forwards in the driver's door lock once to unlock the driver's door and the fuel filler flap only.
F
T
urn the key forwards in the driver's door lock again to unlock the
passenger's door and the boot.
The complete or selective unlocking parameter is set via
the
vehicle configuration menu.
Complete unlocking is activated by default.
Complete unlocking using the key
F Turn the key forwards in the driver's door lock to unlock the vehicle.
Unlocking and partial opening of the boot
F Press this button for more than two seconds to unlock
the boot. The boot opens slightly.
This
action also unlocks the doors and the fuel filler flap.
The
direction indicators flash for a few seconds.
Depending on version, the door mirrors unfold, the alarm is deactivated.\
2/
ACCESS
Page 40 of 292

38
RCZ_en_Chap02_ouvertures_ed01-2015
If one of the doors or the boot is still open, the central locking does \
not take place; the vehicle locks and then immediately unlocks,
witnessed by the sound of the locks rebounding. However, the
alarm (if fitted) will be fully activated after about 45 seconds.
When the vehicle is locked, if it is unlocked inadvertently, it will
lock itself again automatically after thirty seconds unless a door is
opened.
If the alarm had been activated previously, it will not be reactivated
automatically.
The folding and unfolding of the door mirrors using the remote
control
can be deactivated by a PEUGEOT
dealer or a qualified
workshop.
LOCKING THE VEHICLE
Normal locking using the remote control
F Press the closed padlock to lock the vehicle completely .
Normal locking using the key
F Turn the key rearwards in the driver's door lock to lock the vehicle
completely.
deadlocking using the remote control
F Press the closed padlock to lock the vehicle completely.
F Press the closed padlock again within five seconds to
deadlock the vehicle.
deadlocking using the key
Deadlocking renders the exterior and interior door controls
inoperative.
It also deactivates the manual central control button.
Therefore, never leave anyone inside the vehicle when it is
deadlocked.
The direction indicators come on for a few seconds.
Depending on version, the door mirrors fold, the alarm is activated.
F
T
urn the key rearwards in the driver's door lock to lock the vehicle
completely.
F Turn the key rearwards again within five seconds to deadlock the
vehicle.
The direction indicators come on for a few seconds.
Depending on version, the door mirrors fold, the alarm is activated.