tailgate RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 1997, Model line: KANGOO, Model: RENAULT KANGOO 1997 KC / 1.GPages: 83
Page 49 of 83
WIPERS
Rear screen wiper
85
Tailgate versionREMOVING THE MOTOR
Make sure that the wiper motor is in the park po-
sition.
Disconnect the battery.
Note the position of the wiper arms.
Remove:
- the wiper arm mounting nut,
- the wiper arm from its pin using special tool
Elé. 1294-01,
- the inner door handle on versions with swin-
ging doors (1 bolt),
- the tailgate trim (clipped).
Disconnect connector (A) for the wiper motor.
Remove the three bolts (B) mounting the motor
and release it.
Special notes for refitting
Check that the motor is in the park position be-
fore refitting the wiper arm.
Clean the splines on the wiper arm pin using a me-
tal brush.
Refit the wiper arm, locating the blade on the
marks made on removal.
Fit a new nut and torque tighten to 1.2 daN.m (±
20 %) using a torque wrench.
Version with swinging doors
13071R
13070R
85-3