lock RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual KANGOO 1997 KC / 1.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1731/w960_1731-0.png RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

Page 5 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Consumables
10
Identification
Type Quantity Components
RHODORSEAL 5661Coat Driveshaft roll pin holes
Loctite FRENBLOC
Locking and sealing resinCoat Brake caliper mounting

Page 10 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Engine - Gearbox
- the heater hoses on the bulkhead side (with
plastic unions),
10
Disconnect the gear control at the position of the
gearbox output lever after releasing

Page 14 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Engine and transmission assembly
Disconnect:
- the accelerator cable,
- the canister pipe,
- the brake servo pipe,
- the heater hoses,
- the oxygen sensor connector,
- th

Page 15 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Engine and transmission assembly
Insert a wooden block between the gearbox and
the sub-frame.
Diagram showing the holes drilled in tool Mot.
1040-01 (dimensions in mm).
1

Page 20 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Engine and transmission assembly
10
- the relay plate (4), the connector (5) and the
fuse support (6) by removing the fuse holder
(7),
13034R
- the canister pipe,
- the f

Page 21 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Engine and transmission assembly
10
Fit retaining lug Mot. 1159 in place of the coolant
pipe mounting on the cylinder block.
99310R
Remove the suspended engine mounting c

Page 25 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Engine and transmission assembly
10
Remove the computer support.
13088R1
Disconnect:
- the hoses on the expansion bottle,
- the brake servo pipe,
- the heater hoses (ther

Page 26 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Engine and transmission assembly
10
Remove:
- the upper mountings of the radiator and at-
tach it to the engine,
- the nut and the eccentric bolt of the steering
shaft yo

Page 27 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Engine and transmission assembly
10
Remove the suspended engine mounting cover.
13086R1
13086R
Insert a wedge between the gearbox and the sub-
frame.
Remove:
- the nut (1

Page 30 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual ENGINE AND ENGINE PERIPHERALS
Sump
10
Front sub-frame mounting bolt 6.2
Rear sub-frame mounting bolt 10.5
E7J sump bolt 1
F8Q sump bolt 1.5
Steering shaft yoke mounting bolt 3
Engine tie-bar bolt 6.2
Page:   1-10 11-20 21-30 31-40 40 next >