dimensions RENAULT KANGOO 1997 KC / 1.G General Information Workshop Manual

TOWING
All types
Contents
SPECIFICATIONS
Engine - Clutch - Gearbox
Vehicle identification
01-1
01-2
LIFTING
Trolley jack - Axle stands
Underbody lifts
Page
01
02
03
General
vehicle
02-1
02-2
03-1
LUBRICANTS CONSUMABLES
Packaging
04-1
DRAINING FILLING
Engine
Gearbox
Power assisted steering
04
05
05-1
05-3
05-4
VALUES AND SETTINGS
Dimensions
Capacity - Grades
Belt tension
Accessories belt tension
Timing belt tension
Tightening the cylinder head
Tyres and wheels
Brakes
Brake limiter
Underbody heights
Values for checking the front axle
geometry
Values for checking the rear axle
geometry07
07-1
07-2
07-5
07-7
07-11
07-12
07-14
07-15
07-16
07-17
07-20
07-21
Page

The KANGOO Workshop Repair Manual has been prepared by specialists in repair methods
and diagnostics.
The document covers the methods and the diagnostic operations needed in order to obtain
high quality repairs for this vehicle.
However, if a removal - refitting operation involves no particular features, difficulties or
special tools, the method is not described in this manual, being considered very simple for
a vehicle repair specialist.
The labour times are the result of time and motion studies carried out in our workshops,
even though certain methods have not been described in the Workshop Repair Manual.
UNITS OF MEASUREMENT
• All dimensions are expressed in millimetres (mm) unless otherwise indicated.
• Tightening torques are expressed in decaNewton.metres (
daN.m).
• Pressure are given in
bars (reminder: 1 bar = 100 000 Pa).
• Electrical resistance values are in Ohms (Ω).
• Voltages are expressed in Volts (
V).
TOLERANCES
Tightening torques given without a tolerance must be accurate to within:
• In
degrees : ± 3°.
• In
daN.m : ± 10 %.

VALUES AND SETTINGS
Dimensions
(1) Unladen
(2) Laden
07
12333R
Dimensions in metres
07-1