lock RENAULT KANGOO 1997 KC / 1.G Sheet Metal Work Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 1997, Model line: KANGOO, Model: RENAULT KANGOO 1997 KC / 1.GPages: 255
Page 140 of 255
UPPER FRONT STRUCTURE
Plenum chamber
42G
PRB4214
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of :
- the wheel arch for a frontal impact,
- cowl side panel for a side impact.
This operation may be carried out partially (see
diagram and method below).
The Parts Department only provides chambers of
the (1) "air conditioning" type, as a result, the
closure panel must also be ordered (2).
In the following operation there are only descrip-
tions of the joints specific to the part concerned.
Information concerning other parts is dealt with
in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
1 Plenum chamber
Part assembled with :
- bonnet lock mounting,
- windscreen wiper motor mounting.
2 Partition closure panel.
JOINTS WITH :
Wheel arch
Injection unit and impact sensor mounting (left
hand side)
Bulkhead
Pillar lining (cowl side panel)
Windscreen aperture lower cross member
PARTS CONCERNED (thickness in mm) :
1Plenum chamber 1
2Shock absorber cup height adjuster 1
3Shock absorber cup 2
4Injection unit and impact sensor
mounting (left hand side) 2
5Bulkhead 1
6Cowl side panel (pillar lining) 1.5
7Windscreen wiper mounting 1.5
8Windscreen aperture lower cross
member 1.2
or
42-24
Page 233 of 255
TOP OF BODY
Roof rear cross member
45D
PRB4506
INTRODUCTION
The replacement of this part is a complementary
operation to the roof.
In the operation described below there are only
descriptions of the joints specific to the part
concerned.
Information concerning other parts will be dealt
with in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with :
- cross member reinforcement,
- tailgate hinge mounting reinforcement,
- opening door lock mounting reinforcement,
- partition mounting nuts.
JOINTS WITH :
Side panel upper rain channel
Roof stretcher lining
Roof flap rain channel
PARTS CONCERNED (thickness in mm):
1Roof rear cross member 0.8
2Side panel upper rain channel 1.2
3Roof stretcher lining 0.7
4Roof flap rain channel 0.7
45-9
Page 241 of 255
SIDE OPENING ELEMENTS
Front door stiffener
47C
PRB4710
INTRODUCTION
The replacement of this part is a complementary
operation to the front door panel.
In the operation described below there are only
descriptions of the joints specific to the part
concerned.
Information concerning other parts will be dealt
with in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part only.
JOINTS WITH:
Door box section
Stiffener
PARTS CONCERNED (thickness in mm):
1Door box section 0.8
2Stiffener 1.2
3Lock striker plate reinforcement 1.2
47-6