weight RENAULT KANGOO 1997 KC / 1.G Sheet Metal Work Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 1997, Model line: KANGOO, Model: RENAULT KANGOO 1997 KC / 1.GPages: 255
Page 9 of 255
GENERAL
Identification
40
Numbers given on the manufacturer’s plate and on the engine plate should be quoted in all letters or
orders.
1 The type mines of the vehicle and the chassis number
2 The total all up weight(P.T.M.A.)
3 The maximum permitted total train weight (P.T.R. - vehicle loaded with trailer)
4 The maximum permitted weight on the front axle (P.T.M.A. front axle)
5 The maximum permitted weight on the rear axle (P.T.M.A. rear axle)
6 The technical features of the vehicle
7 The paint reference
8 The equipment level
9 The vehicle type
10 The trim code
11 The additional equipment definition
12 The fabrication number
13 The interior matching trim code
e0-00/00-0000-000-000-00
VF000000000000000
0000 kg
0000 kg
1
- 0000 kg
2
- 0000 kg
000000000000000RENAULT S.A.
1
2
3
4
5
8 7
6
9
10
13
12 11
40-5
Page 10 of 255
GENERAL
Means of lifting
40
AXLE STANDS
To place the vehicle on axle stands, they MUSTbe
placed:
- either under the reinforcements provided for
lifting the vehicle with the jack which forms
part of the vehicle equipment,
- or under the points behind the reinforcements.
Rear positioning of the axle stands can be carried
out by lifting the vehicle from the side.
Safety symbol (special precautions to be taken when carrying out operations).
SPECIAL TOOLING REQUIRED
Cha. 280 -02 Adaptable cross piece for trolley
jack
Cha. 408 -01
or Adaptable socket for trolley jack
Cha. 408 -02
If a trolley jack is used, appropriate axle
stands must always be used.
The vehicle MUST NOT be lifted by supporting its
weight under the front suspension arms, or under
the V section rear axle.
According to the type of trolley jack, use sockets
Cha. 408-01 or Cha. 408-02 to position the cross
piece Cha. 280-02.
To lift at the front or rear, take the weight under
the vehicle jacking points.
LIFTING FROM THE SIDE WITH A TROLLEY JACK
Use cross piece Cha. 280-02.
Take the weight under the valance at the front
door.
Position the flange correctly in the cross member
groove.
12333-2G
12274-1R
85679-1G15
40-6