RENAULT TWINGO 2009 2.G Chasiss Workshop Manual

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual https://www.carmanualsonline.info/img/7/1719/w960_1719-0.png RENAULT TWINGO 2009 2.G Chasiss Workshop Manual

Page 251 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 37A-72
MECHANICAL COMPONENT CONTROLS
Gear control unit: Adjustment
JB1
37A
aPosition the (Bvi. 1133-01) between the control le-
ver (4) and the gearbox casing.aPosition a 5 mm thick adjustment shim be

Page 252 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 37A-73
MECHANICAL COMPONENT CONTROLS
Gear control unit: Adjustment
JB1
37A
II -  FINAL OPERATION.
aRefit:
-the heat shield,
-the heat shield clips.

Page 253 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 37A-74
MECHANICAL COMPONENT CONTROLS
Parking brake cables: Removal - Refitting
EQ UIPMENT LEVEL EA0 or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA5
or EQUIPMENT LEVEL EAG or EQUIP

Page 254 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 37A-75
MECHANICAL COMPONENT CONTROLS
Parking brake cables: Removal - Refitting
EQ UIPMENT LEVEL EA0 or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA5
or EQUIPMENT LEVEL EAG or EQUIP

Page 255 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 37A-76
MECHANICAL COMPONENT CONTROLS
Parking brake cables: Removal - Refitting
EQ UIPMENT LEVEL SPORT
37A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aFit:
-the vehicle on a two-post lift (see Vehicle:

Page 256 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 37A-77
MECHANICAL COMPONENT CONTROLS
Parking brake cables: Removal - Refitting
EQ UIPMENT LEVEL SPORT
37A
aUnclip the parking brake cables at (6) .
aUnhook the parking brake cables from the callipers

Page 257 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 37A-78
MECHANICAL COMPONENT CONTROLS
Brake servo: Check
RIGHT-HAND DRIVE
37A
There is no “RENAULT” tool to check the braking as-
sistance circuit.
Use a vacuum pump, adapting the end pieces, part

Page 258 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 37A-79
MECHANICAL COMPONENT CONTROLS
Brake servo: Check
RIGHT-HAND DRIVE
37A
III - CHECKING THE BRAKE SERVO
aRemove the non-return valve (6) from the brake ser-
vo (see 37A, Mechanical component contr

Page 259 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 37A-80
MECHANICAL COMPONENT CONTROLS
Brake servo: Check
RIGHT-HAND DRIVE
37A
aConnect a vacuum pump to the end of the non-re-
turn valve.
aActivate the vacuum pump to obtain a vacuum of
500 mbar.
aChe

Page 260 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 38C-1
ANTI-LOCK BRAKING SYSTEM
Hydraulic brake unit: List and location of components38C
The anti-lock braking system pump assembly is
equipped with a 26-track computer.
102311
 (1)  Master cylinder pr