ad blue SKODA SUPERB 2005 1.G / (B5/3U) DX Navigation System Manual

RADIO NAVIGATION SYSTEM55
NAVIGATION
Important information
This system has been pre-equipped for dynam-
ic navigation. The following prerequisites must
be fulfilled before you can take advantage of
this function:
–the navigation CD must be able to support
dynamic navigation
– it must be possible for the receiver to pick
up at least one TMC station.
If you have any questions, please contact a
·koda Auto service centre.
What is dynamic navigation?
Dynamic navigation means that the system
automatically calculates and adjusts the driving
route on the basis of the traffic information re-
ceived.
This traffic information is transmitted inaudibly
by a number of different radio stations on the
TMC (Traffic Message Channel) in addition to
their regular programming.
The navigation system receives this informa-
tion via a separate TMC box and evaluates it
accordingly. If the system receives traffic in
formation that affects the calculated route, the
route will be re-calculated automatically.
Automatic traffic congestion function (for systems with dynamic navigat\
ion)
Traffic information is depicted in symbols in the
map display:
stop-and-go traffic
traffic congestion
closed road
The corresponding section of the route is
shown underlined in blue in the map display.
Before you can take advantage of dynamic
navigation, it must be possible to receive a
radio station that broadcasts traffic information
via TMC. The TMC box will automatically select
a TMC station, but you can also tune into a
different station manually. Selecting TMC stations
•Press the traffic congestion key ^^ ^^
^.
The traffic congestion menu will appear.
•Mark and confirm the “RDS station” menu
field.
A list of the TMC stations within reception range
will appear.
•Mark and confirm the desired station.

RADIO NAVIGATION SYSTEM56
NAVIGATION
In the symbol and map display, an antenna
symbol will indicate that the system is tuned
into a current TMC station.
TMCThe system is tuned into a TMC
station.
Note
This does not affect the radio station that you
are actually listening to. If the station you select-
ed is no longer within reception range, the sys-
tem will automatically tune into the nearest TMC
station.
Switching dynamic navigation on/off
•Press the traffic congestion key ^^ ^^
^.
The traffic congestion menu will appear.
•Mark and confirm the “Route option” menu
field.
The route options menu will appear.
•Mark the “Dynamisation” menu field.
•Press the menu knob to switch dynamisa-
tion on or off.
The active setting is marked in blue and with a
triangle.
The traffic congestion status is indicated in the
symbol and map display:
TMCdynamic navigation off
TMCDdynamic navigation on, route ad-
justment possible
To store the selected options permanently,
mark and confirm the “Route option” menu
field.
Notes
Once you have activated route dynamisation,
the other route options are fixed and can no
longer be changed.
Dynamisation can also be switched on or off
during active route guidance.
If the dynamisation function is switched on, the
“GALA” function is switched off, page 15.

RADIO NAVIGATION SYSTEM58
NAVIGATION
Manual traffic congestion function (for systems with dynamic navigation)
In addition to dynamic navigation, you can use
the manual traffic congestion function to ex-
clude sections of the route lying ahead. The
navigation system will then calculate an alter-
nate route to the selected destination, where-
by the excluded sections of road will be by-
passed as far as possible. Route guidance will
be continued using the new route.
The symbol and map display will indicate the
status of traffic congestion:
TMCno exclusions
TMCroad sections excluded manually
TMCDdynamic navigation on, route ad-
justment possible, manual traffic
congestion detour is also active
The corresponding section of the route is also
shown underlined in blue in the map display.
Volba funkce vyhodnocování dopravních
zácp Activating the traffic congestion function
•When route guidance is active, press the
traffic congestion button ^^ ^^
^.
The traffic congestion menu will appear.
If the system has not yet calculated a route, it
will not be possible to select the “Tailback
ahead” menu field. To return to the previous
menu, press
99 99
9 or the system will auto-
matically return to the previous menu after a
short waiting period.
Selecting an alternate route manually
•Press the traffic congestion function ^^ ^^
^.
The traffic congestion menu will appear.
•Mark and confirm the “Tailback ahead”
menu field.
Depending on the surrounding area (urban or
rural area), the system will suggest a section of
road that should be excluded from the current
route.
•Turn the menu knob to add or remove ad-
ditional road sections.
•Once you have set the desired length of
road sections, press the menu knob.
The alternate route will be calculated and route
guidance will continue.

RADIO NAVIGATION SYSTEM59
NAVIGATION
Cancelling the alternate route
•Press the traffic congestion button ^^ ^^
^.
The traffic congestion menu will appear.
•Mark and confirm the “Tailback ahead”
menu field.
Now you will be able to enter new traffic con-
gestion or cancel any route exclusions you
have entered by pressing the menu knob
again. The route will be re-calculated and route
guidance will continue.
Notes
Route exclusions will remain stored until you
have reached your destination or cancel them.
You cannot exclude more than one section of
the route at a time.
Manual traffic congestion function (for systems without dynamic navigation)
Use this function to exclude sections of the
route lying ahead for the current route. The
navigation system will calculate an alternate
route to your selected destination and bypass
the section of the route entered as far as
possible. Route guidance will begin with the
new route.
The symbol and map display will indicate the
status of the traffic congestion function at the
top left:
no exclusions
route section excluded
In addition, the route section that has been ex-
cluded will be underlined in blue in the map
display. Activating the traffic congestion function•When route guidance is active, press the
traffic congestion button ^^ ^^
^.
The traffic congestion menu will appear.
If you have not yet entered a route, the traffic
congestion menu will appear, but you will not
be able to select any of the menu fields. Press
99 99
9 or wait until the system automatically
returns to the previous menu.

RADIO NAVIGATION SYSTEM62
NAVIGATION
Selecting the language
•Mark and confirm the “Select language”
menu field in the “Settings” menu.
A list indicating the languages that can be se-
lected will appear.
•Mark and confirm the language you want
to use on the list.
After you confirm your selection, voice output
will be activated. The following message will
appear in the language you have selected:
“Voice output is being loaded. Please wait.”
Following this, the navigation function will start
and the main navigation menu will appear.
Setting your vehicle location manually
Use this function to set your vehicle location
manually. This will not be necessary unless the
system is not able to determine the vehicle lo-
cation automatically, e.g. after the vehicle has
been transported on a ferry or train. Make your
entry using the menus for Town - Street - In-
tersection.
•Mark and confirm the “Manual location”
menu field in the “Settings” menu. The “Cur-
rent loc. city” menu will appear.
•Then proceed as described in the section
of entering your destination (see page 28).
When you have selected the intersection, the
“Enter position” menu will appear.
•In this menu, use the “Intersection” menu
field to set your current vehicle location in re-
lation to the intersection and the “Direction”
menu field for due north.
•Now use the “OK” menu field to confirm your
vehicle location entry.
Volume setup
Use this menu to set the volume for voice out-
put during route guidance. This menu is de-
scribed on page 14 .
•Mark and confirm the “Volume setup” menu
field. The “Volume setup” menu will appear.
•Select the desired setting. Display
Here you can choose between the display of
the arrival time or the travelling time to your
selected destination in the map or symbol dis-
play.
•Mark and confirm the “Show” menu field.
Press the menu knob to choose between the
display of “arrival time” and “travel time”.
Contrast
You can select different contrast settings for
day and night display.
•Mark and confirm the “Contrast” menu field.
The setting scale on the right will be marked in
blue. The current setting will be marked by a
white rectangle.
•Now mark and confirm the desired setting.
The marking on the setting scale will disap-
pear.
Setting the clock
The clock is set automatically via GPS. The
GPS system transmits UTC world time. There
is a time difference of two hours to Central Eu-
ropean daylight savings time and one hour to
Central European regular time. This has to be
corrected manually. The clock must be set to
the correct time for the system to deliver accu-
rate arrival times.
•Mark and confirm the “Set clock” menu field.

RADIO NAVIGATION SYSTEM63
NAVIGATION
The hours will appear in white lettering.
•Turn the menu knob to enter the current
time.
•Press the menu knob to confirm the time
you have entered.
Night display
You can select whether you want to switch the
display to night display manually by pressing
the display button
88 88
8 or automatically when the
car headlights are switched on.
•Mark the “Illumination” menu field in the
“Settings” menu.
Press the menu knob repeatedly to switch be-
tween the “auto” and “manual” switching
modes.
The display selected will be marked by a blue
triangle and blue lettering.
Note
You can always switch the display manually,
even if the automatic function has been
activated. GPS viewer
GPS (Global Positioning System) is a naviga-
tion system that was developed by the
Pentagon. It currently consists of 25 satellites
that orbit the Earth at an altitude of 21,000 km.
If the system is able to pick up signals from at
least 3 of the satellites, it will be able to
determine the vehicle’s current location.
•Mark and confirm the “GPS viewer” menu
field in the “Settings” menu.
The information display that appears will indi-
cate:
– the number of satellites available
– the number of satellites whose signals are
within reception range
– the current geographical location of the ve-
hicle.
Note
If the system is not able to pick up signals from
at least 3 satellites, the following message will
appear: “Geographic location cannot current-
ly be determined”. Anti-theft coding is an electronic system that
prevents unauthorised persons from using the
equipment after it has been disconnected from
its power source.
Each time that
–
the system is disconnected from the vehi-
cle power supply
– the battery is disconnected
– the electric fuse for the radio blows
the following message will appear in the dis-
play: “SAFE”. You will not be able to switch on
the system until you have entered the correct
code.
This code number can be found along with
the series number in the back of the operat-
ing instructions on the “Equipment card”.
Make sure that you remove the “Equipment
card” and keep it in a safe place. Never leave
the card inside the vehicle. This makes the
equipment useless to thieves!
Anti-theft coding