change language SKODA YETI 2009 1.G / 5L Owner's Manual
[x] Cancel search | Manufacturer: SKODA, Model Year: 2009, Model line: YETI, Model: SKODA YETI 2009 1.G / 5LPages: 271, PDF Size: 16.24 MB
Page 28 of 271

Instruments and Indicator/Warning Lights
27
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
Yellow symbols A yellow symbol signals a warning.Check the relevant function as soon as possible. The meaning of the yellow symbols: One 
 warning signal will sound if a yellow symbol appears. 
If several operational faults  
of priority 2 exist, the symbols appear one after the other  
and are each illuminated for about 5 seconds.
Set-upYou can change certain settings by means  
of the information display. The current  
setting is shown on the information display in the respective menu at the top below the  line  
⇒fig. 28
. 
You can select the following information (d 
epending on the equipment installed on  
the vehicle):•
Language
•
MFD Data (MFA DATA)
•
Convenience
•
Lights & Vision (Lights & Vision)
•
Time
•
Winter tyres
•
Units
•
Assistant (Assistant)
•
Alternative speed displayed (Second speed)
•
Tra v e l  m o d e
•
Service Interval (Service)
•
Factory Setting
•
Back 
After selecting the menu point  
Back
 you will reach one level higher in the menu.
Check engine oil level, engine oil sensor faulty
⇒ page 205
Brake pad worn
⇒page 36
Fig. 27  Information display: Brake pad  worn
Fig. 28  Setting the clock
sgg.6.book  Page 27  Thursday, September 24, 2009  2:32 PM 
Page 29 of 271

Instruments and Indicator/Warning Lights
28Language Here you can set in which language the warning and information texts should be  displayed. Displays of the MFA Here you can switch off or on certain di 
splays of the multi-
functional indicator. 
Comfort* You can set the following functions (depen 
ding on the equipment installed on the  
vehicle): 
Lights and Visibility Here you can set how long the light should  
stay on for the func
tion Coming/Leaving  
Home. Furthermore you can here switch on or 
 off the function daylight driving lights  
and convenience turn signal. After selecting the menu point  
Factory setting
 the factory setting of the lighting is  
established again. Time Here you can set the time, the time format 
 (12 or 24 hour indicator) and the time  
change summer/winter time. Winter tyres Here you can set at which speed a warning signal should sound. This function is used  for e.g winter tyres with the permissible maximum speed less than the maximum speed of the vehicle. When exceeding the speed, the following is displayed on the information display*:
Snow tyres max. speed ... km/h (Winter tyres maximum ... km/h) 
Measures Here you can set the units for temperat 
ure, consumption and distance driven. 
Assistant Here you can adjust the tones of the  
acoustic signals of the parking aid*. 
Second speed Here you can switch on the display of the second speed in mph or in km/h
2). 
Tra v e l  m o d e Here you can activate / deactivate the mode “tourist light”. This mode makes it possible  to drive in countries with opposing traffi 
c system, driving on the left/right, without  
dazzling the oncoming vehicles. The headligh 
t swivel function is deactivated when  
switching on this mode. Further information  
⇒page 56.
Rain closing
On vehicles with rain sensor you can switch on or off the  function for automatic closing of the windows and the sliding/tilting roof in case of ra 
in and locked vehicle. If it is  
not raining and the function is 
 set, the windows including  
the sliding/tilting roof are closed automatically after approx. 12 hours.
Door open
Here you can switch on or off the functions for opening a  single door and automatic closing.
ATA c o n fi r m
Here you can set if a signal to 
ne should sound additionally  
when activating or deactivating the anti-theft alarm sys- tem.
Window op.
Here you can set the convenience mode only for the driver  window or for all the windows.
Mirror down
Here you can switch on or off the function for mirror low-ering on the front passenger side when engaging the  reverse gear 
a).
Mirror adjust.
Here you can switch on or off the function for left and right  exterior mirror adjustment simultaneously.
Fa cto r y  se tt ing
 
After selecting this menu the convenience setting is reset  to factory setting. The following is displayed in the infor- mation display: Factory setting for convenience is set
a)This function is only available on vehicles wi 
th an electrically adjustable driver seat.
2)Valid for countries where the values ar
e indicated in British measuring units.
sgg.6.book  Page 28  Thursday, September 24, 2009  2:32 PM 
Page 133 of 271

Communication
132
The buttons operate the functions for the 
operating mode of the current telephone.
Operate the telephone via the information display*The display of texts in the menu 
Phone
 is possible in the following languages: 
Czech, English, German, French,  
Italian, Spanish and Russian. 
If you select the menu point  
Phone
 on the information display with the aid of the  
handwheel  , you can change to the following menus: „
Phone book
 „
Last calls
 „
Received calls
 „
Missed calls 
Phone book In the menu point  
Phone book
 is the list of the loaded 
contacts from the telephone  
memory and the SIM card of the mobile phone. In the phone phonebook there are 1 500 free memory locations available.Voice control of the telephoneIntroductionFig. 129  Illustration image: Single 
-button adapter / two-button adapter
On vehicles which are factory-fitted with a na
vigation system with voice control*, it is  
only possible to operate the voice control via the navigation system*. The description  on how to operate the voice control can be fo 
und in the operating instructions of your  
navigation system*. The voice control of the telephone is 
 activated by pressing the button 
 (button push  
to talk) on the adapter*  
⇒fig. 129
 or by briefly pressing the button   on the multi- 
function steering wheel*  
⇒page 131, fig. 128
. 
Aside from the PTT button, the SOS butt 
on can be found on certain adapters*  
⇒ fig. 129
. This button is without function.
Note
The adapters illustrated 
are only prime examples.
 
 press briefly
Accept call, terminate call,
entry in the main menu of the telephone
 
 press button  for a long time
Reject call, 
entry in the main menu of the telephone
 
 press briefly
Reach one level higher in the menu
 
 press button  for a long time
Return in the main menu
 
press briefly
Confirm menu selection 
 
press button for a  long period of  
time
Confirm menu selection, 
the following initial letters in the telephone book
 
 turn upwards
Previous menu point
 
 turn down- wards
Next menu point
Button
Action
Operation
A2A2A3A3A4A4A4A4
A4
A1
sgg.6.book  Page 132  Thursday, September 24, 2009  2:32 PM