TESLA MODEL 3 2018 Owners Manual

Operating Seat Heaters
To control the front seat heaters for the driver
and passenger, touch the corresponding
control on the main climate control area. To
control rear seat heaters, and access duplicate
controls for the front seat heaters, touch the
fan icon, touch the Seats tab, then touch the
seat for which you want to adjust heating.
Seat heaters operate at three setting levels
from 3 (highest) to 1 (lowest). When
operating, the associated seat icon displays
twisting lines that turn red to indicate the
setting level.
Climate Control Operating Tips

Overview
Touch the Media Player app to listen to FM or
Internet radio, stream music or podcasts (if
available), or play audio
files from a Bluetooth
or USB-connected device.
Available source content displays across the
top of Media Player: Radio, Streaming, TuneIn,
and Phone. An additional source, USB,
displays when you insert a
flash drive into a
USB port in the front console. Touch a source
to browse the content available for your chosen source.
You can use the Now Playing view, which displays at the bottom of Media Player, to
control what

Internet Radio
Internet radio services are accessed over a
data connection. To use Internet radio, touch Media Player

To delete a favorite, touch the
highlighted Favorites icon. You can
also delete one or more favorites on
the bottom of the Now Playing view
by pressing and holding a favorite.
An X appears on all favorites. Touch
the X associated with the favorite(s)
you want to delete.
To see selections that you have recently
played, touch Recent on the Now Playing
view. Your recently played selections are
updated continuously so you don

Bluetooth

Unpairing a Bluetooth Phone
If you want to disconnect your phone and use
it again later, simply touch Disconnect on the
Bluetooth settings screen. If you do not want
to use your phone with Model 3 again, touch Forget This Device . Once you forget a device,
you need to pair it again if you want to use it
with Model 3 (see Pairing a Bluetooth Phone
on page 93).
Note: Your phone automatically disconnects
whenever you leave Model 3.
Note: Unpairing the phone has no
effect on
using the phone as a key. To forget an
authenticated phone, see Keys on page 6.
Connecting to a Paired Phone
Model 3 automatically connects with the last
phone to which it was connected, provided it
is within operating range and has Bluetooth turned on. If the last phone is not within range,
it attempts to connect with the next phone that it has been paired with.
To connect to a
different phone, touch the
Bluetooth icon on the touchscreen

Overview
The touchscreen displays a map at all times.
Hold and drag a
finger to move the map in any
direction. Rotate the map in any direction
using two
fingers.
Touch these icons to set the map

When you touch Navigate, and specify a
location, the touchscreen zooms out to
provide an overview of the route you need to travel, and, after the route is calculated, the
touchscreen zooms back in to your starting
point and begins to provide spoken instructions. Depending on the map

Predicting Energy Usage
When navigating to a destination, Model 3
helps you anticipate your charging needs by
calculating the amount of energy that remains
when you reach your destination. The
calculation is an estimate based on driving
style (predicted speed, etc.) and
environmental factors (elevation changes,
weather, etc.). When you initiate a navigation
route, the touchscreen displays this calculation
at the bottom of the turn-by-turn direction list.
Thereafter, you can display it by touching the
area at the bottom of the turn-by-turn
direction list.
Throughout your route, Model 3 monitors energy usage and updates the calculation. A
popup warning displays at the bottom of the
turn-by-turn direction list in these situations:

If Trip Planner estimates that you won