lock TOYOTA AYGO 2011 Owner's Manual

OCCUPANT RESTRAINT SYSTEMS45
CAUTION
DAdjustments should not be made
while the vehicle is moving.
DAvoid reclining the seatback any
more than needed. The seat belts
provide maximum protection in a
frontal or rear collision when the
driver and the front passenger are
sitting up straight and well back in
the seats. If you are reclined, the
lap belt may slide past your hips
and apply restraint forces directly
to the abdomen or your neck may
contact the shoulder belt. In the
event of a frontal collision, the
more the seat is reclined, the great-
er the risk of death or serious inju-
ry.
DAfter adjusting the seatback, push
back your body to make sure it is
locked in position.
MS13010a
For easy access to the rear seat:
1. Pull the seatback angle adjusting lever.
2. Move the seat to the front−most posi-
tion with pushing the seatback.
Once the passengers are in, lift up the
seatback and return the seat to its locked
position.
CAUTION
DAfter putting back the seat, try
pushing the seat forward and rear-
ward to make sure it is secured in
place.
DNever allow anyone to pull the seat-
back angle adjusting lever while the
vehicle is moving.
AYGO WE 99E37E11 02.18
—Moving front seat for rear
seat entry (3−door models)

46OCCUPANT RESTRAINT SYSTEMS
MS13085a
3−door models
MS13011a
5−door models
BEFORE FOLDING REAR SEAT
Insert the tab of the rear seat belt as
shown in the illustration.
This prevents the shoulder belt from being
damaged.
Also take care due to avoid catching the
shoulder belt in the rear seatback when
returning it to the upright position.
CAUTION
The seat belt must be removed from
the hole when the seat belt is in use.
MS13012a
Ty p e A
MS13013
Ty p e B
FOLDING REAR SEAT
1. With head restraints: Push the head
restraint down to the lowest posi-
tion.
2. Type A: Unlock the seatback and
fold it down while pulling the strap.
Each seatback can be folded sepa-
rately.
Type B: Unlock the seatback and
fold it down while pulling the straps.
AYGO WE 99E37E11 02.18
Fold−down rear seat
(with rear seat)

OCCUPANT RESTRAINT SYSTEMS47
CAUTION
DDo not allow sitting on top of a
folded−down seatback, in the lug-
gage compartment or cargo area.
DWhen returning seats to their origi-
nal position make sure the seat is
securely locked by pushing forward
and rearward on the top of the
seatback. Failure to do so will pre-
vent seat belt from operating prop-
erly.
DMake sure the seat belts are not
twisted or caught in the seatback or
under the bottom cushion, and are
arranged in their proper position
and are ready to use.
MS13014
Rear seats
For your safety and comfort, adjust the
head restraint before driving.
To raise: Pull it up.
To lower: Push it down while pressing the
lock release button.
Rear head restraints—
When an occupant sits on the rear seat,
always pull up the rear head restraint to
the lock position.
The head restraint is most effective when
it is close to your head. Therefore, using
a cushion on the seatback is not recom-
mended.
CAUTION
DAdjust the center of the head re-
straint so that it is closest to the
top of your ears.
DUse the head restraint designed for
each respective seat.
DAfter adjusting the head restraint,
make sure it is locked in position.
DDo not drive with the head re-
straints removed.
AYGO WE 99E37E11 02.18
Head restraints
(with rear seats)

OCCUPANT RESTRAINT SYSTEMS49
DInspect the belt system periodically.
Check for cuts, fraying, and loose
parts. Damaged parts should be re-
placed. Do not disassemble or mo-
dify the system.
DKeep the belts clean and dry. If
they need cleaning, use a mild soap
solution or lukewarm water. Never
use bleach, dye, or abrasive clean-
ers, or allow them to come into
contact with the belts—they may
severely weaken the belts. (See
“Cleaning the interior” on page 250
in Section 5.)
DReplace the belt assembly (includ-
ing bolts) if it has been used in a
severe impact. The entire assembly
should be replaced even if damage
is not obvious.
DDo not allow children to play with
the seat belt. If the seat belt be-
comes twisted around a child’s
neck, it may lead to choking or oth-
er serious injuries that could result
in death. If this occurs and the
buckle cannot be unfastened, scis-
sors should be used to cut the belt.
MS13090
Ta b
Buckle
Adjust the seat as needed and sit up
straight and well back in the seat. To
fasten your belt, pull it out of the re-
tractor and insert the tab into the
buckle.
You will hear a click when the tab locks
into the buckle.
The seat belt length automatically adjusts
to your size and the seat position.
The retractor will lock the belt during a
sudden stop or on impact. It also may
lock if you lean forward too quickly. A
slow, easy motion will allow the belt to
extend, and you can move around freely.
If the seat belt cannot be pulled out of the
retractor, firmly pull the belt and release
it. You will then be able to smoothly pull
the belt out of the retractor.
CAUTION
DAfter inserting the tab, make sure
the tab and buckle are locked and
that the belt is not twisted.
DDo not insert coins, clips, etc. in
the buckle as this may prevent you
from properly latching the tab and
buckle.
AYGO WE 99E37E11 02.18
—Fastening front and rear
seat belts

52OCCUPANT RESTRAINT SYSTEMS
MS13018a
The seat belt pretensionersystem con-
sists mainly of the following components
and their locations are shown in the il-
lustration.
1. SRS warning light
2. Airbag sensor assembly
3. Seat belt pretensioner assemblies
The seat belt pretensioners are controlled
by the airbag sensor assembly. The airbag
sensor assembly consists of a safing sen-
sor and airbag sensor.
When the seat belt pretensioners are acti-
vated, an operating noise may be heard
and a small amount of non−toxic gas may
be released. This does not indicate that
a fire is occurring. This gas is normally
harmless.
Once the seat belt pretensioners have
been activated, the seat belt retractors
remain locked.
If the vehicle is involved in multiple colli-
sions, the pretensioner will activate for the
first collision, but will not activate for the
second or subsequent collisions.
CAUTION
Observe the following precautions to
reduce the risk of injury in the event
of sudden braking or an accident.
Failure to do so may cause death or
severe injury.
DIf the pretensioner has activated,
the SRS warning light will come on.
In that case, the seat belt cannot
be used again and must be re-
placed at any authorized Toyota
dealer or repairer, or another duly
qualified and equipped professional.
DDo not modify, remove, strike or
open the seat belt pretensioner as-
semblies, airbag sensor or sur-
rounding area or wiring. Consult
any authorized Toyota dealer or re-
pairer, or another duly qualified and
equipped professional about any re-
pair and modification.
AYGO WE 99E37E11 02.18

OCCUPANT RESTRAINT SYSTEMS81
A child restraint system for a small
child or baby must itself be properly
restrained on the seat with either the
lap belt or the lap portion of the lap/
shoulder belt. You must carefully con-
sult the manufacturer ’s instructions
which accompany the child restraint
system.
To provide proper restraint, use a child
restraint system following the manufactur-
er ’s instructions about the appropriate age
and size of the child for the child restraint
system.
Toyota recommends that you use a child
restraint system which conforms to the
regulation “ECE No.44”.
Install the child restraint system correctly
following the instructions provided by its
manufacturer. General directions are also
provided under the following illustrations.
The child restraint system should be
installed on the rear seat. According to
accident statistics, the child is safer when
properly restrained in the rear seat than
in the front seat.
CAUTION
When the child restraint system is
not in use:
DKeep the child restraint system
properly secured on the seat even
if it is not in use. Do not store the
restraint unsecured in the passen-
ger compartment.
DIf it is necessary to detach the
child restraint system, remove it
from the vehicle or store it securely
in the luggage compartment. This
will prevent it from injuring passen-
gers in the event of a sudden stop,
sudden swerve or accident.
Type of seat belt
ELR (Emergency Locking Retractor) belt—
This belt locks when the belt is pulled out
quickly but it does not have an additional
fully−extended lock mode. When installing
a child restraint system, you willneed a
locking clip.
If your child restraint systemdoes not
provide a locking clip, you can purchase
the following item from any authorized
Toyota dealer or repairer, or another duly
qualified and equipped professional.
Locking clip for child restraint system
(Part No. 73119−22010)
AYGO WE 99E37E11 02.18
—Child restraint system

90OCCUPANT RESTRAINT SYSTEMS
MS13051a
(A) BABY SEAT INSTALLATION
A baby seat must be used in rear−fac-
ing position only.
When installing a child restraint system,
follow the instructions provided by its
manufacturer.
Depending on the type of your child re-
straint system, you willneed a locking clip
to install a child restraint system properly.
If your child restraint systemdoes not
provide a locking clip, you can purchase
one at any authorized Toyota dealer or
repairer, or another duly qualified and
equipped professional. (See “—Child
restraint system” onpage 81.)
MS13052a
CAUTION
DDo not install a child restraint sys-
tem on the rear seat if it interferes
with the lock mechanism of the
front seats. Otherwise, the child or
front seat occupant(s) may be killed
or seriously injured in the event of
sudden braking, sudden swerving or
an accident.
DIf the driver ’s seat position does
not allow sufficient space for safe
installation, install the child re-
straint system on the rear right
seat (left−hand drive vehicle) or
rear left seat (right−hand drive ve-
hicle). Child restraint system
installed on the rear seat should
not contact the front seatbacks.
AYGO WE 99E37E11 02.18
—Installation with seat belt

OCCUPANT RESTRAINT SYSTEMS95
MS13053a
To install the baby seat:
Run the lap and shoulder belt through or
around the baby seat following the instruc-
tions provided by its manufacturer and in-
sert the tab into the buckle taking care
not to twist the belt. Keep the lap portion
of the belt tight. Then, fit the locking clip.
CAUTION
DAfter inserting the tab, make sure
the tab and buckle are locked and
that the lap and shoulder portions
of the belt are not twisted.
DDo not insert coins, clips, etc. in
the buckle as this may prevent your
child from properly latching the tab
and buckle.
DIf the seat belt does not function
normally, it cannot protect your
child from death or serious injury.
Contact any authorized Toyota deal-
er or repairer, or another duly quali-
fied and equipped professional, im-
mediately. Do not install the child
restraint system on the seat until
the seat belt is fixed.
SH13054
CAUTION
Push and pull the child restraint sys-
tem in different directions to be sure
it is secure. Follow all the installation
instructions provided by its manufac-
turer.
AYGO WE 99E37E11 02.18

96OCCUPANT RESTRAINT SYSTEMS
MS13055
To remove the baby seat:
Press the buckle release button and re-
move a locking clip in case of use and
allow the belt to retract completely. The
belt will move freely again and be ready
to work for an adult or older child passen-
ger.
MS13056a
(B) CHILD SEAT INSTALLATION
A child seat must be used in a for-
ward−facing or rear−facing position de-
pending on the age and size of the
child. When installing, follow the
manufacturer ’s instructions about the
applicable age and size of the child as
well as directions for installing the
child restraint system.
When installing a child restraint system,
follow the instructions provided by its
manufacturer.
Depending on the type of your child re-
straint system, you willneed a locking clip
to install a child restraint system properly.
If your child restraint systemdoes not
provide a locking clip, you can purchase
one at any authorized Toyota dealer or
repairer, or another duly qualified and
equipped professional. (See “—Child
restraint system” onpage 81.)
AYGO WE 99E37E11 02.18

OCCUPANT RESTRAINT SYSTEMS97
MS13057a
CAUTION
DDo not install a child restraint sys-
tem on the rear seat if it interferes
with the lock mechanism of the
front seats. Otherwise, the child or
front seat occupant(s) may be killed
or seriously injured in the event of
sudden braking, sudden swerving or
an accident.
DIf the driver ’s seat position does
not allow sufficient space for safe
installation, install the child re-
straint system on the rear right
seat (left−hand drive vehicle) or
rear left seat (right−hand drive ve-
hicle). Child restraint system
installed on the rear seat should
not contact the front seatbacks.
AYGO WE 99E37E11 02.18