TOYOTA CAMRY 1999 Service Repair Manual

AUTOMATIC TRANSAXLEVALVE BODY ±
AX±85
(d) Install the B
0 accumulator assembly.
(e) Install the torque the 3 bolts.
Torque: 6.6 N´m (67 kgf´cm, 58 in.´lbf)
15. INSTALL LOCK PLATE
16. INSTALL SOLENOIDS
(a) Coat new O±rings with ATF and install them to the sole-
noids.
(b) Install the lock±up solenoid.
(c) Install and torque the bolt.
Torque: 6.6 N´m (67 kgf´cm, 58 in.´lbf)
(d) Install the No.4 solenoid.
(e) Install and torque the bolt.
Torque: 6.6 N´m (67 kgf´cm, 58 in.´lbf)
(d) Install No.1 and No.2 solenoids.
(e) Install and torque the 3 bolts.
Torque: 6.6 N´m (67 kgf´cm, 58 in.´lbf)

AUTOMATIC TRANSAXLEUPPER VALVE BODY ±
AX±86
UPPER VALVE BODY
COMPONENTS
AX047±03

AUTOMATIC TRANSAXLEUPPER VALVE BODY ±
AX±87
VALVE BODY SPRINGS SPECIFICATIONS
HINT: During reassembly please refer to the spring specifications above to help discriminate between
the different springs.
Mar
kName (Color)Free Length / Outer Diameter
mm (in.)Total No. of Coils
@@
@@
@:
[c A]
Lock±Up Relay Valve (Yellow)26.8 (1.055) / 10.2 (0.402)10.8
@@
@@
@:
[c B]
B1 Orifice Control Valve (White)24.8 (0.976) / 6.4 (0.252)12.0
@@
@@
@:
[c C]
Throttle Valve (Green)31.5 (1.240) / 7.0 (0.276)11.4
@@
@@
@:
[c D]
Down±Shift Plug (None)15.0 (0.591) / 11.0 (0.433)7.0
AX048±03

AUTOMATIC TRANSAXLEUPPER VALVE BODY ±
AX±88
@@
@@
@:
[c E]
Low Coast Modulator Valve (Purple)20.2 (0.795) / 7.9 (0.311)11.9

AUTOMATIC TRANSAXLEUPPER VALVE BODY ±
AX±89
RETAINERS, PIN, AND CHECK BALLS LOCATION
1. PIN, RETAINERS
MarkNameHeight / Width / Thickness
mm (in.)
@@@@@: [c A]B1 Orifice Control Valve8.9 (0.350) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c B]Low Coast Modulator Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
2. CHECK BALLS
AX0GZ±02

AUTOMATIC TRANSAXLELOWER VALVE BODY ±
AX±90
LOWER VALVE BODY
COMPONENTS
AX04A±03

AUTOMATIC TRANSAXLELOWER VALVE BODY ±
AX±91
VALVE BODY SPRINGS SPECIFICATIONS
HINT: During reassembly please refer to the spring specifications above to help discriminate between
the different springs.
Mar
kName (Color)Free Length / Outer Diameter
mm (in.)Total No. of Coils
@@
@@
@:
[c A]
Accumulator Control Valve (Red)25.1 (0.988) / 8.6 (0.339)8.0
@@
@@
@:
[c B]
2±3 Shift Valve (None)28.0 (1.102) / 7.6 (0.299)10.3
@@
@@
@:
[c C]
1±2 Shift Valve (Light Green)29.2 (1.150) / 8.9 (0.350)12.0
@@
@@
@:
[c D]
Reverse Control Valve (White/Purple)38.1 (1.500) / 6.5 (0.256)19.0
AX04B±03

AUTOMATIC TRANSAXLELOWER VALVE BODY ±
AX±92
@@
@@
@:
[c E]
Cut±Back Valve (None)21.8 (0.858) / 6.0 (0.236)13.5
@@
@@
@:
[c F]
Primary Regulator Valve (None)36.6 (1.441) / 16.1 (0.634)6.3
@@
@@
@:
[c G]
3±4 Shift Valve (None)28.0 (1.102) / 7.6 (0.299)10.3
@@
@@
@:
[c H]
Second Lock Valve (None)20.7 (0.815) / 7.4 (0.291)9.5
@@
@@
@:
[c I]
Second Coast Modulator Valve (White)32.2 (1.268) / 9.0 (0.354)11.4
@@
@@
@:
[c J]
Solenoid Modulator Valve (Purple/Pink)30.2 (1.189) / 5.6 (0.220)15.3
@@
@@
@:
[c K]
Secondary Regulator Valve (None)46.9 (1.846) / 5.9 (0.232)21.8

AUTOMATIC TRANSAXLELOWER VALVE BODY ±
AX±93
RETAINERS AND CHECK BALLS LOCATION
1. RETAINERS
MarkNameHeight / Width / Thickness mm (in.)
@@@@@: [c A]Accumulator Control Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c B]2±3 Shift Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c C]1±2 Shift Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c D]Reverse Control Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c E]Cut±Back Valve6.5 (0.256) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c F]Secondary Regulator Valve11.0 (0.433) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c G]Solenoid Modulator Valve8.5 (0.335) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c H]Lock±Up Control Valve9.2 (0.362) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c I]Second Coast Modulator Valve8.0 (0.315) / 5.0 (0.197) / 3.2 (0.126)
@@@@@: [c J]Second Lock Valve9.2 (0.362) / 11.5 (0.453) / 3.2 (0.126)
@@@@@: [c K]3±4 Shift Valve6.5 (0.256) / 5.0 (0.197) / 3.2 (0.126)
2. CHECK BALLS
Upper Side
AX0TY±01

AUTOMATIC TRANSAXLELOWER VALVE BODY ±
AX±94
Lower Side