reset TOYOTA iQ EV 2013 Owners Manual (in English)

16Pictorial index
■Switches
Outside rear view mirror switches . . . . . . . . . . . . . . . . . . . . P. 145
Odometer/trip meter display and
instrument panel light change knob . . . . . . . . . . . . . . . . . . P. 106
“DISP” knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 108
Window lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 147
Door lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 132
Power window switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 147
Tire pressure warning reset switch . . . . . . . . . . . . . . . . . . . P. 2861
2
3
4
5
6
7

852-2. Charging
2
EV system
◆The names of each part of the charging cable
*: The shape of the plug differs in accordance with the voltage and the targetregion.
Charging connector
Latch release button
Power indicator
Error warning indicator
Test button Reset button
CCID (Charging Circuit Inter-
rupting Device)
Plug
*
1
2
3
4
5
6
7
8

1053. Instrument cluster
3
Instrument cluster
Gauges and meters
Speedometer
Displays the vehicle speed.
Odometer and trip meter display
Odometer:
Displays the total distance the vehicle has been driven.
Trip meter:
Displays the distance the vehicle has been driven since the meter was last
reset. Trip meters “A” and “B” can be used to record and display different
distances independently.
Multi-information display
Displays pieces of information regarding the vehicle driving or battery
charging. ( P. 108)
SOC (State of Charge) gauge
Displays the amount of charge remaining in the traction battery.
EV System Indicator
Displays the EV system output or regeneration level. ( P. 107)
Outside temperature display
Displays the outside temperature. (P. 242)
Clock
P. 1 1 3
1
2
3
4
5
6
7

1063. Instrument cluster
Shift position indicator
Displays the selected shift position. (P. 171)
“DISP” knob
P. 108
Odometer/trip meter display and instrument panel light change
knob
P. 106
Switches between odometer and
trip meter displays. When the trip
meter is displayed, pressing and
holding the knob will reset the trip
meter.
The brightness of the instrument panel lights can be adjusted by turn-
ing the knob.
Darker
Brighter
Changing the display
8
9
10
Instrument panel light control
1
2

1093. Instrument cluster
3
Instrument cluster
■Display contentsDriving range
The approximate driving range the vehicle can drive with the cur-
rent traction battery’s remaining charge.
• This driving range is only an estimate, which has been calculatedusing previous power consumption averages and the air conditioning
operating mode, the actual driving range may differ.
• To clear the previous power consumption averages, reset the aver- age/current power consumption.
1

1103. Instrument cluster
Average power consumption/Current power consumption
Displays average power consum ption and current power con-
sumption.
Average power consumption: Displays the average power con-
sumption since the function was reset.
• The function can be reset by pressing the “DISP” knob for longer than 1 second when the average power consumption is displayed. Reset-
ting the average power consumption will also reset the previous
power consumption averages, that are used to calculate the possible
driving range. In addition, the information displayed on the past
record screen of the navigation system will be updated.
• Use the displayed average power consumption as a reference.
Current power consumption: Displays current power consump-
tion.
After charge
Every time the battery is charged the last two records of power
consumption and the current po wer consumption are displayed.
Electric component usage status
The usage status of primary electric components, such as the air
conditioning system, is displayed.
Driving range (Highway, City)
From the current traction batter y’s remaining charge, the approx-
imate driving distance via highway driving and city driving,
respectively, are displayed.
• These displayed driving ranges are only an estimate, which have been calculated from a preset power consumption value and an aver-
age energy consumption of the air conditioning system. The actual
driving ranges may differ.
2
3
4
5

1113. Instrument cluster
3
Instrument cluster
Average vehicle speed/Elapsed time
Displays average vehicle speed and elapsed time.
Average vehicle speed: Displays the average vehicle speed
when the function is reset.
Elapsed time: Displays the elaps ed time since it was last reset.
• The function can be reset by pressing the “DISP” knob for longer than
1 second when the average vehicle speed/elapsed time is displayed.
Traction battery information
The battery temperature, motor regenerative performance and
motor output performance are displayed. ( P. 1 1 5 )
Screen settings
The meter settings can be changed. • Eco Driving Indicator Light settings
Eco Driving Indicator Light can be activated or deactivated.
• Clock settings
The clock can be adjusted.
• Ambient Light settings
The speedometer illumination color can be changed or turned off.
The light color will change in sync with the EV system indicator.
Timer charging set (start/finish) time
A timer charging start or finish time will be displayed.
A timer charging set time will be displayed only when the timer charging
has been scheduled. Timer charging set time will not be displayed when
the charging timer function has not been scheduled.
6
7
8
9

1153. Instrument cluster
3
Instrument cluster
■Traction battery information
High or low temperatures of the traction battery, or traction battery’s remain-
ing charge being low may affect the motor performance.
Output performance: If the motor output performance has reduced, the maxi-
mum vehicle speed may be limited.
Regenerative performance: If the regenerative performance has reduced, the regenerative braking ability will be reduced.
Firmly depress the brake pedal.
■ Changes in possible driving range
●When the traction battery capacity has reduced, the possible driving range
will be calculated in accordance with such capacity. Therefore, the possible
driving ranges (highway, city) with the battery fully charged will be different
from those when the vehicle was new. ( P. 190)
● Estimated possible driving ranges are calculated based on power consump-
tion averages. Power-efficient driving manners ( P. 94) may increase the
estimated driving ranges.
● Air conditioning on or off affects possible driving ranges. Variation in possi-
ble driving ranges significantly varies depending on the previous energy
consumption of the air conditioning system, driving manners and weather.
■ Welcome onboard display
■ When the 12-volt battery is disconnected
The following data will be reset:
●Trip meter
● Driving range
*
●Average power consumption/Current power consumption
● After charge
● Driving range (highway, city)
● Average vehicle speed/Elapsed time
● Timer charging set time (start/finish time will be 0:00, start time setting mode
will be activated)
When the power switch is turned to ON
mode, the multi-information display will
show the vehicle name and the 3 differ-
ent types of driving ranges, and then dis-
play the screen at the time the power
switch was turned to off.
After battery charging, the charging result
will be displayed. ( P. 187, 198, 206)

1163. Instrument cluster
●Clock
● Instrument panel brightness levels (light intensity will become the maximum
level both when the tail lights are turned on and off)
*: Estimated driving ranges are calculated based on the previous power con-
sumption, which is leaned by the computer. When the 12-volt battery is dis-
connected, the previous power consumption averages will be reset. This
will result in different estimated driving ranges prior to the battery discon-
nection.
■ Adjusting to a full hour
The minute values will be rounded to the nearest hour. So, minute values
from “:00” to “:29” are rounded down, and values from “:30” to “:59” are
rounded up
*.
*: e.g.
1:00 to 1:29  1:00
1:30 to 1:59  2:00
■ Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
NOTICE
■During setting up the display
To prevent 12-volt battery discharge, ensure that the EV system is operating
while setting up the display features.
■ The multi-information disp lay at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.

1825-4. How to charge
Press the test button on the
CCID (Charging Circuit Inter-
rupting Device) to check that
the electrical leakage detection
function operates properly.
If the error warning indicator illumi-
nates when the test button is
pressed, the function is operating
correctly.
After the test has been completed,
press the reset button to turn off
the error warning indicator. Charg-
ing cannot be carried out while the
error warning indicator is illumi-
nated.
If the error warning indicator does
not come on even if the test button
is pressed, it is likely that the func-
tion is not operating correctly. Stop
charging immediately and contact
your Scion dealer.
Press the recharge inlet door
opener switch to open the
recharge inlet door.
The recharge inlet door will not
open when the “READY” indicator
is on or the power switch is in ON
mode.
If the recharge inlet door will not
open. (P. 191)
3
4