TOYOTA SEQUOIA 2001 Service Repair Manual

BO46R±01
N21523
H10166
N21424
H10514
BO±80
± BODYSLIDING ROOF
3633 Author: Date:
2005 SEQUOIA (RM1146U)
DISASSEMBLY
1. REMOVE NO. 3 SLIDING ROOF HOUSING SIDE
MOUNTING BRACKETS
2. REMOVE SLIDING ROOF HOUSING REAR MOUNT-
ING BRACKETS
3. REMOVE SLIDING ROOF SUNSHADE STOPPER
(a) Remove the screw and stopper.
(b) Employ the same manner described above to the other
side.
4. REMOVE SUNSHADE TRIM
5. REMOVE REAR ROOF DRIP CHANNEL
Remove the 2 screws and rear roof drip channel as shown in
the illustration.
6. REMOVE REAR FRAME
Remove the 4 screws and rear frame.
7. REMOVE DRIVE CABLE
(a) Remove the screw and sliding roof panel stopper.
(b) Slide the drive cable rearward, then remove it.
(c) Employ the same manner described above to the other
side.

H12171
H10516
N21522
H11049
± BODYSLIDING ROOF
BO±81
3634 Author: Date:
2005 SEQUOIA (RM1146U)
HINT:
At the time of reassembly, please refer to the following items.

Adjust the drive cable to a closed and tilted down position.

Slide the cable forward or backward to align the 2 marks
as shown in the illustration.

Slide the cable to the forefront with your hand.
8. REMOVE ROOF WIND DEFLECTOR PANEL
9. REMOVE GUIDE BLOCK
(a) Remove the 2 screws and guide block.
(b) Employ the same manner described above to the other
side.
10. REMOVE SLIDING ROOF HOUSING
Remove the 6 screws and sliding roof housing.
11. REMOVE CABLE GUIDE CASING
Remove the 2 screws and cable guide casing.

BO46S±01
BO3396
H12171
BO±82
± BODYSLIDING ROOF
3635 Author: Date:
2005 SEQUOIA (RM1146U)
ADJUSTMENT
ADJUST SLIDING ROOF GLASS IN CLEARANCE
(a) When the front or rear/left or right alignment is not correct,
remove the drive gear and sliding roof glass, then adjust
the drive cable.
NOTICE:
Remove the drive gear with the sliding roof fully closed.
(b) Adjust by sliding the cable forward or rearward or rear-
ward to align the 2 marks as shown.
(c) Install the driving ear and sliding roof glass.

BO46T±01
± BODYSLIDING ROOF
BO±83
3636 Author: Date:
2005 SEQUOIA (RM1146U)
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page BO±80).

BO46U±01
BO±84
± BODYSLIDING ROOF
3637 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
Installation is in the reverse order of removal (See page BO±79).

BO4S5±01
H24375
Instrument Panel ReinforcementFront Passenger Airbag Assembly
Lower No. 2
Finish Panel
No. 2 Brace
Center Heater to
Register Duct
No. 1 Brace
No. 2 Heater to
Register DuctNo. 4 Heater to
Register DuctAssist Grip Plug
Instrument Panel
Radio Tuner
Assembly Assist Grip
Front Pillar Garnish
Combination Meter Switch Base
Lower Finish PanelGlove Compartment
Door
Side Panel
Cowl Side
Trim Board
Cluster
Finish
Panel
Console Box
BezelUpper
Console Panel w/ Seat heater:
Seat Heater Switch
Steering
Wheel Pad Front Console Box
Lower
Steering
Column Cover
Front Door
Scuff Plate
N´m (kgf´cm, ft´lbf): Specified torque
CC
G
G
C
G
G
G
GC
CC
C
DDD
DD
A
A
A
A
AA
AA
F
FF
DD
D
DB
BB
B
5.0 (51, 44 in.´lbf)
20 (204, 15)
A
A
Headphone
Terminal
8.8 (90, 78 in.´lbf)
Lower No. 2
CoverLower No. 3
Cover
AAAA
Headphone
TerminalRear Console
Box w/ Rear seat entertainment :
w/ Rear heater A/C:
Rear Heater Control
Panel
w/ Rear seat
entertainment :
Disc Player
Coverw/ Rear heater A/C:
Disc Player
w/o
Rear heater
A/C:
Rear Heater
Control PanelHeater
Control
Panel
w/ Rear seat audio or rear
seat entertainment:
8.8 (90, 78 in.´lbf)
Steering Wheel
Upper Steering Column Cover
Front Door
Scuff Plate
Side Panel
Cowl Side Trim Board
5.0 (51, 44 in.´lbf)
Integration
Control Panel
Combination Switch
50 (510, 37)
Front Pillar Garnish
Lower Instrument Cover
Shifting Hole
Cover
Door Control
Receiver
Assist Grip Plug
H
B
± BODYINSTRUMENT PANEL
BO±85
3638 Author: Date:
2005 SEQUOIA (RM1146U)
INSTRUMENT PANEL
COMPONENTS

H21026
Instrument Panel
Center Bracket
F
No. 5 Heater to Register DuctNo. 2 Register No. 3 Heater to Register Duct
E
Center Stay
F
F
No. 1 Register
F
FE
E
EE
E
Side Defroster
Nozzle Duct BO±86
± BODYINSTRUMENT PANEL
3639 Author: Date:
2005 SEQUOIA (RM1146U)

H24372
Console Compartment
Box Assembly
40 (408, 30)
Box Panel
Sub±Assembly
± BODYINSTRUMENT PANEL
BO±87
3640 Author: Date:
2005 SEQUOIA (RM1146U)

H11188
Shape
SizeShapeSize Shape Sizemm (in.)
ù = 5.22
(0.2055)
L = 16
(0.63)
ù = 8
(0.31)ù = 6
(0.24)
L = 14
(0.55)
ù = 5
(0.20)
L = 16
(0.63)ù = 5
(0.20)
L = 16
(0.63)
ù = 6
(0.24) ù = 6
(0.24)
L = 25
(0.98)ù = 8
(0.31)
L = 22
(0.87) BO±88
± BODYINSTRUMENT PANEL
3641 Author: Date:
2005 SEQUOIA (RM1146U)
HINT:
Screw shapes and sizes are indicated in the table below. The codes (ºAº ± ºHº) correspond to those indicated
on the previous page.

BO4HL±02
H24383Claw
H16716
2 Clips
H16717
Clip
± BODYINSTRUMENT PANEL
BO±89
3642 Author: Date:
2005 SEQUOIA (RM1146U)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the
airbag working.
2. REMOVE FRONT DOOR SCUFF PLATE
(a) Remove the 4 screws and front door scuff plate.
(b) Use the same manner described above on the other side.
3. REMOVE COWL SIDE TRIM BOARD
(a) Remove the nut and cowl side trim board.
(b) Use the same manner described above on the other side.
4. REMOVE SIDE PANEL
5. REMOVE FRONT PILLAR GARNISH
(a) Remove the assist grip.
(1) Using a screwdriver, remove the 2 assist grip plugs.
HINT:
Tape the screwdriver tip before use.
(2) Remove the 2 bolts and assist grip.
(b) Remove the front pillar garnish.
(c) Use the same manner described above on the other side.
6. REMOVE STEERING WHEEL PAD (See page SR±14)
7. REMOVE STEERING WHEEL (See page SR±14)
8. REMOVE STEERING COLUMN COVERS (See page
SR±14)
9. REMOVE COMBINATION SWITCH
Disconnect the 4 connectors, remove the 3 screws and com-
bination switch.