display TOYOTA SOLARA 2004 Accessories, Audio & Navigation (in English)

vi
1North-up or heading-up symbol
This symbol indicates a map view with
north-up or heading-up. T ouching this sym-
bol changes the map orientation. 9 . . . . . . .
2Scale indicator
This figure indicates the map scale. 9 . . . .
3INFOº button
Push this button to display the Information
Menuº screen. ii, 96, 101, 109 . . . . . . . . . .
4Zoom out switch
Touch this switch to reduce the map scale. 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
5Markº switch
Touch this switch to register the cursor posi-
tion as a memory point. 6 . . . . . . . . . . . . . . .
6Routeº switch
Touch this switch to change the route. 42, 44
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7DISPLAYº button
Push this button to display the Displayº
screen. 108 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Your navigation system Ð
Ð Quick reference

vii
8Map Viewº switch
Touch this switch to obtain information re-
garding the route to the destination and infor-
mation about the POI (Points of Interest) on
map screen. 49, 51, 52 . . . . . . . . . . . . . . . .
9 OFFº switch
Touch this switch to obtain a broader view,
some of the switches on the screen are not
displayed. They reappear by touching the
ON
º switch. 89 . . . . . . . . . . . . . . . . . . . . .
10Zoom in switch
Touch this switch to magnify the map scale. 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
11Foot print map switch
Touch this switch to display the foot print
map and the building information. 58 . . . . .
12MAP/VOICEº button
Push this button to repeat a voice guidance,
cancel one touch scroll, start guidance and
display the current position. 5, 6, 42 . . . . .
13DESTº button
Push this button to display the Destinationº
screen. viii, 20 . . . . . . . . . . . . . . . . . . . . . . . .
14Screen configuration switch
Touch this switch to change the screen
mode. 53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15MENUº button
Push this button to display the Menuº
screen. x, 17, 61 . . . . . . . . . . . . . . . . . . . . . .
16Distance and time to destination
Displays the distance and the estimated
travel time to the destination. 57 . . . . . . . . .
17GPSº mark (Global Positioning
System)
Whenever your vehicle is receiving signals
from the GPS, this mark is displayed. 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ix
7Mapº switch
You can select a destination simply by
touching the location on the displayed map.
34
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8Intersectionº switch
You can enter the names of two intersecting
streets. This is helpful if you do not know the
specific street address of your destination
but know the general vicinity. 35 . . . . . . . . .
9Freeway Ent./Exitº switch
You can enter the name of a freeway (inter-
state) entrance or exit. 36 . . . . . . . . . . . . . . .
10Phone #º switch
You can enter a destination by the telephone
number. 37 . . . . . . . . . . . . . . . . . . . . . . . . . . .
11Coordinatesº switch
You can set a destination using latitude and
longitude coordinates. 37 . . . . . . . . . . . . . . .
12Quick access switch
You can select one of 5 preset destinations
directly. To use this function, it is necessary
to set the Attributeº for each memory point.
(To register the Quick Accessº, see page
70.) 22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13Home switch
You can select your own home without en-
tering the address each time. To use this
function, it is nece ssary to set the Attributeº
for the memory point. (To register the
Homeº, see page 70.) 22 . . . . . . . . . . . . . .
14Changeº switch
To change the search area, touch this
switch. 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .

xThe switches below perform the follow-
ing operations.
1Map DVDº switch
Displays information regarding the disc ver-
sion or covered area. 12 . . . . . . . . . . . . . . . .
2Select Userº switch
Enables recall of up to t hree memorized user
setting patterns. 63 . . . . . . . . . . . . . . . . . . . .
3Setupº switch
Enables various settings for the navigation
system. 76 . . . . . . . . . . . . . . . . . . . . . . . . . . .
4My Placesº switch
Enables changes to Memory pointsº and
Areas to avoidº. 66 . . . . . . . . . . . . . . . . . . . .
5Suspend Guidanceº and Resume
Guidanceº switch
Suspends or resumes the guidance. 62
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6Volumeº switch
Sets the volume of the voice guidance. 63
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ð Menuº screen

BASIC FUNCTIONS
1
BASIC FUNCTIONS
Basic information before operation
Display operation2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . . . . . . . . . . . . .
Touch switch operation 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . . . . . . . .
Inputting letters and numbers 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . . .
Current position display 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . . . . . . . .
Screen scroll operation (one-touch scroll) 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map scale 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . . . . . . . . . . . . . . . . . . .
Orientation of the map 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
. . . . . . . . . . . .
Limitations of the navigation system 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map database information and updates 12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION I

BASIC FUNCTIONS
2
Display operation
1U009
You can adjust the angle of the display by
pushing the
TILTº button. Each push of
the
TILTº button will tilt the display to
positions
1, 2, 3 and then back to 0 in
the reverse order.
If you turn the ignition switch off, the display
will automatically move back to position
0.
The display will automatically resume the pre-
vious position when the ignition switch is
turned to the ACCº or ONº position.
CAUTION
Take care not to jam your hand while the
display is moving. Otherwise, you
could be injured.
NOTICE
Do not obstruct the display while it is moving. It could damage your naviga-tion system.
INFORMATION
Under extremely cold conditions, thedisplay may react slowly or operationsound may become louder.
Touch switch operation
This system is operated mainly by the
switches on the screen. To prevent dam-
age to the screen, lightly touch switches
on the screen with your finger. When you
touch a switch on the screen, a beep
sounds.
Do not use objects other than your finger
to touch the screen.
INFORMATION

If the system does not respond to atouch of a switch, move your fingeraway from the screen and then touchit again.

You cannot operate dimmedswitches.

Wipe off fingerprints on the surface ofthe display using a glass cleaningcloth.

The displayed image may becomedarker and moving images may beslightly distorted when the display iscold.

Under extremely cold conditions, themap may not be displayed and the
data input by a user may be deleted.Also, the switches may be harderthan usual to depress.

BASIC FUNCTIONS
3
Inputting letters and numbers
When searching for an address or a name, or
entering a memo, you can input letters and
numbers via the touch screen.

To input letters
To display the alphabet keys, touch the
A-Zº switch or the - ݺ switch.
Enter letters by touching the alphabet keys di-
rectly.
: Touching this switch erases one let-
ter. Holding this switch will continue
to erase letters.

To input numerals and symbols
To display the number keys and symbol keys,
touch the
0-9º switch.
Enter numerals and symbols by touching the
number keys and symbol keys directly.
: Touching this switch erases one let-
ter. Holding this switch will continue
to erase letters.
: Touching this switch displays other
symbols.

To display the list
To search for an address or a name, touch theListº switch. Matching items from the da-
tabase are listed even if the entered address
or name is incomplete.
If the number of matches is four or less, the list
is displayed without touching the
Listº
switch.

BASIC FUNCTIONS
4
INFORMATION
The number of matching items is shownto the right side of the screen. If thenumber of matching items is more than9,999, the system displays 
****º on
the screen.

List screen operation
When a list is displayed, you can scroll or
page through the list by using the appropriate
switch.
To shift to the next or previous
page.
To scroll up or down one item at a
time.
This expresses a displayed
screen position.
If appears to the right of the
item name, the complete name is
too long for the display. Touch
to scroll to the end of the name.
Touch to scroll to the
beginning of the name.

BASIC FUNCTIONS
5
Current position display
When starting the navigation system, the cur-
rent position is displayed first.
This screen displays the current vehicle posi-
tion and a map of the surrounding local area.
The current vehicle position mark appears in
the center or bottom center of the map
screen. You can return to this map screen
showing your current position at any time
from any screen by touching the
MAP/
VOICEº
button.
During driving, the current vehicle position
mark is fixed in the screen and the map
moves. The current position is automatically set as
your vehicle receives signals from the GPS
(Global Positioning System). If your current
position is not correct, it is automatically cor-
rected after your vehicle receives signals
from the GPS.
INFORMATION

After
the battery disconnection, or on
a new vehicle, the current position may not be correct. As soon as thesystem receives signals from theGPS, the correct current position isdisplayed.

To correct the current position manu-ally, see page 77.
Screen scroll operation
(one-touch scroll)
Touch any point on the map and that point
moves to the center of the screen and is
shown by the cursor mark.
If you wish to look at a point on the map which
is different to your current vehicle position,
you can bring the desired point to the center
of the screen by using the scroll feature.
If you continue to hold your finger on the
screen, the map will continue scrolling in that
direction until you lift your finger.

BASIC FUNCTIONS
6
After you scroll the screen, the map remains
centered at the selected location until you ac-
tivate another function. The current vehicle
position mark will continue to move along
your actual route and may move off the
screen. When you touch the
MAP/
VOICEº button, the current vehicle position
mark returns to the center of the screen and
the map moves as you proceed along the
designated route.
INFORMATION
When you use the one-touch scroll fea-
ture, the current vehicle position mark may disappear from the screen. Movethe map with a one-touch scroll again orpush the
MAP/VOICEº button to re-
turn to the current vehicle position map location display.

To set the cursor position as a destina-
tion
You can set a specific point on the map as a
destination using the one-touch scroll func-
tion.
Touch the Enter º switch.
The screen changes and displays the map
location of the selected destination and
the route preference. (See  Ð Entering
destinationº on page 38.)
If there is already a preset destination, touch
the
Add to º switch or the Replace
º switch.
When there is already a preset destination,
using the
Add to º switch to set an addi-
tional destination, will set the new one as the
first point of arrival.

To register the cursor position as a
memory point
Memory point registration enables easy ac-
cess to a specific point.
Touch the Markº switch.
When you touch the
Markº switch, the fol-
lowing screen appears for a few seconds, and
then the map screen returns.