TOYOTA TERCEL 1996 Service Repair Manual

SF19A-01
Z14697
RSC
+B
Battery
Closed
Z14698
RSO +B
Battery
Open MF-36
- MFIIDLE AIR CONTROL (IAC) VALVE
1996 TERCEL (RM440U)
INSPECTION
INSPECT IAC VALVE OPERATION
(a) Connect the positive (+) lead form the battery to terminal
+B and negative (-) lead to terminal RSC, and check that
the valve is closed.
(b) Connect the positive (+) lead from the battery to terminal
+B and negative (-) lead to terminal RSO, and check that
the valve is open.
If operation is not as specified, replace the IAC valve.

SF0XH-03
- MFIIDLE AIR CONTROL (IAC) VALVE
MF-37
1996 TERCEL (RM440U)
INSTALLATION
Installation is in reverse order of removal (See page MF-35).

P20320
EFI Main
Relay
SF0XI-04
Z13175
Continuity
Ohmmeter
30
85 No
Continuity
Ohmmeter86
87
Z13176
Continuity
30
85 Ohmmeter86
87
Battery MF-38
- MFIEFI MAIN RELAY
562 Author
: Date
:
1996 TERCEL (RM440U)
EFI MAIN RELAY
INSPECTION
1. REMOVE EFI MAIN RELAY (Marking: EFI MAIN)
LOCATION: In the engine compartment relay box.
2. INSPECT EFI MAIN RELAY CONTINUITY
(a) Using an ohmmeter, check that there is continuity be-
tween terminals 86 and 85.
If there is no continuity, replace the relay.
(b) Check that there is no continuity between terminals 87
and 30.
If there is continuity, replace the relay.
3. INSPECT EFI MAIN RELAY OPERATION
(a) Apply battery voltage across terminals 86 and 85.
(b) Using an ohmmeter, check that there is continuity be-
tween terminals 87 and 30.
If there is no continuity, replace the relay.
4. REINSTALL EFI MAIN RELAY

SF0XJ-01
P20940
Circuit Opening Relay
Lower No.1 Finish Panel Cowl Side Trim
Door Scuff Plate
- MFICIRCUIT OPENING RELAY
MF-39
563 Author
: Date
:
1996 TERCEL (RM440U)
CIRCUIT OPENING RELAY
COMPONENTS

SF0XK-05
Z13175
OhmmeterNo
Continuity
30
8587 86
Z13176
87
OhmmeterContinuity
86
85 30 MF-40
- MFICIRCUIT OPENING RELAY
1996 TERCEL (RM440U)
INSPECTION
1. REMOVE CIRCUIT OPENING RELAY
2. INSPECT CIRCUIT OPENING RELAY CONTINUITY
(a) Using an ohmmeter, check that there is continuity be-
tween terminals 86 and 85.
If there is no continuity, replace the relay.
(b) Check that there is no continuity between terminals 87
and 30.
If there is continuity, replace the relay.
3. INSPECT CIRCUIT OPENING RELAY OPERATION
(a) Apply battery voltage across terminals 86 and 85.
(b) Using an ohmmeter, check that there is continuity be-
tween terminals 87 and 30.
If there is no continuity, replace the relay.
4. REINSTALL CIRCUIT OPENING RELAY

SF0XL-03
- MFIVSV FOR EXHAUST GAS RECIRCULATION (EGR)
SYSTEMMF-41
565 Author
: Date
:
1996 TERCEL (RM440U)
VSV FOR EVAPORATIVE EMISSION (EVAP)
COMPONENTS

SF0XM-05
E
FE MF-42
- MFIVSV FOR EXHAUST GAS RECIRCULATION (EGR)
SYSTEM
1996 TERCEL (RM440U)
INSPECTION
1. REMOVE VSV
2. INSPECT VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between the
terminals.
Resistance: 33 - 39 W at 20°C (68°F)
If there is no continuity, replace the VSV.
3. INSPECT VSV FOR GROUND
Using an ohmmeter, check that there is no continuity between
each terminal and the body.
If there is continuity, replace the VSV.
4. INSPECT VSV OPERATION
(a) Check that air does not flow from ports E to F.
NOTICE:
Never apply more than 60 kPa (0.61 kgf/cm
2, 8.7 psi) of
pressure compressed air to the VSV.
(b) Apply battery positive voltage across the terminals.
(c) Check that air flows from ports E to F.
If operation is not as specified, replace the VSV.
5. REINSTALL VSV

SF0XP-05
- MFIENGINE COOLANT TEMPERATURE (ECT) SENSOR
MF-43
567 Author
: Date
:
1996 TERCEL (RM440U)
ENGINE COOLANT TEMPERATURE (ECT) SENSOR
COMPONENTS

SF0XQ-05
Z02917
Ohmmeter
Resistance kW
Temperature °C (°F) Acceptable MF-44
- MFIENGINE COOLANT TEMPERATURE (ECT) SENSOR
1996 TERCEL (RM440U)
INSPECTION
1. DRAIN ENGINE COOLANT
2. REMOVE ECT SENSOR
3. INSPECT ECT SENSOR
Using an ohmmeter, measure the resistance between the ter-
minals.
Resistance: Refer to the graph
If the resistance is not as specified, replace the ECT sensor.
4. REINSTALL ECT SENSOR
5. REFILL WITH ENGINE COOLANT

SF0XR-03
- MFIINTAKE AIR TEMPERATURE (IAT) SENSOR
MF-45
569 Author
: Date
:
1996 TERCEL (RM440U)
INTAKE AIR TEMPERATURE (IAT) SENSOR
COMPONENTS