engine VOLKSWAGEN CORRADO 1993 Manual PDF
[x] Cancel search | Manufacturer: VOLKSWAGEN, Model Year: 1993, Model line: CORRADO, Model: VOLKSWAGEN CORRADO 1993Pages: 920, PDF Size: 6.92 MB
Page 317 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 3)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
R-134a .............................................. Sanden MSC105
Nissan
Altima .................................. Zexel DKV-14C Rotary Vane
Maxima & 300ZX ............................... Zexel DKS-16H 6-Cyl.
Quest .......................................... Ford FX-15 10-Cyl.
Pathfinder & Pickup ..................... Zexel DKV-14C Rotary Vane
Sentra & NX ............................. Zexel DKV-14D Rotary Vane
240SX .......................................... Calsonic V5 5-Cyl.
Porsche
911 America Roadster,
RS America & Carrera 2/4 ...................... Nippondenso 10-Cyl.
Saab
900 ................................................. Sanden 5-Cyl.
9000 ............................ Seiko-Seiki SS121 DN1 Rotary Vane
Subaru
Impreza ......................................... Zexel Rotary Vane
Legacy ...................................... Zexel DKS-15CH 5-Cyl.
Calsonic V5-15C 5-Cyl.
Loyale .................................. Hitachi MJS170-5DP 6-Cyl.
SVX ............................................ Calsonic V5 5-Cyl.
Suzuki ......................................... Nippondenso 10-Cyl.
Toyota
Camry ................................. Nippondenso 10PA17C 10-Cyl.
Celica
4A-FE Engine .......................... Nippondenso 10PA15C 10-Cyl.
3S-GTE & 5S-FE Engine .............. Nippondenso 10PA17C/VC 10-Cyl.
Corolla ................................ Nippondenso 10PA15 10-Cyl.
Land Cruiser ........................... Nippondenso 10PA17 10-Cyl.
MR2 .................................... Nippondenso 10P13C 10-Cyl.
Paseo ...................................... Matsushita Rotary Vane
Pickup & 4Runner .............................. Nippondenso 10-Cyl.
Previa ................................ Nippondenso 10PA17E 10-Cyl.
Supra ......................................... Nippondenso 10-Cyl.
Tercel ............................... Matsushita TV10B Rotary Vane
T100 ................................... Nippondenso 10PA15 10-Cyl.
Volkswagen
Cabriolet .................................... Sanden SD-508 5-Cyl.
Or SD-709 7-Cyl.
Corrado SLC .................................. Sanden SD-709 7-Cyl.
EuroVan ...................................... Sanden SD7H15 7-Cyl.
Golf, GTI & Jetta .................. Sanden SD7-V16/SD7-V16L 7-Cyl.
Fox ............................................ Nippondenso 6-Cyl.
Passat ............................. Sanden SD7-V16/SD7-V16L 7-Cyl.
Volvo
240 ......................................... Seiko-Seiki SS-121DS5
850 ......................................... Zexel DKS-15CH 6-Cyl.
940 & 960 ................................... Sanden SD-510 5-Cyl.,
Sanden SD-709 7-Cyl. Or
Seiko-Seiki SS-121DS5
(1) - Standard equipment on some models built after 5/1/93.ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Page 319 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 5)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
(1) - Total system capacity, unless otherwise noted.
(2) - Compressor refrigerant oil capacity.
(3) - Capacity revised by manufacturer in Acura Service News
bulletin number ASN 0793-02.
(4) - Use R-134a refrigerant and ND-Oil 8 (Part No.
38899-PR7-003).
(5) - Use R-134a refrigerant and Polyalkylene Glycol (PAG) oil.
(6) - Use R-134a and Poyalkylene Glycol Oil (Part No.
81-22-9-407-724).
(7) - Use R-134a refrigerant and PAG Refrigerant Oil (Part
No. 38899-P13-003).
(8) - Use R-134a refrigerant and Type "S" Oil (Part
No. KLH00-PAGS0).ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄREFRIGERANT OIL & REFRIGERANT CAPACITY (ISUZU THROUGH MERCEDES)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ (1) Oil Refrigerant
Application Ounces Ounces
Isuzu (R-12)
Amigo ........................ 5.0 .................... 26
Pickup
2.3L & 2.6L Engine ........... 5.0 .................... 26
3.1L Engine .................. 6.0 .................... 26
Rodeo
2.6L Engine .................. 5.0 .................... 26
3.2L Engine .................. 5.0 .................... 26
Stylus ....................... 5.0 .................... 21
Trooper ...................... 5.0 .................... 30
Isuzu (R-134a Option) (3)
Amigo & Pickup
2.3L & 2.6L Engine ........... 5.0 .................... 23
3.1L Engine ................ 7.5-8.5 .................. 23
Rodeo ........................ 5.0 .................... 23
Trooper ...................... 5.0 .................... 26
Jaguar
XJS ........................ (2) 4.6 .................. 40
XJ6 ........................ (2) 4.5 .............. (4) 40
Lexus
ES300 ...................... (2) 3.5 ............... 32-35
GS300 ...................... (2) 4.0 ........... (5) 28-32
LS400 .................... (2) 2.8-3.5 ............ (5) 32
SC300 & SC400 .............. (2) 4.0 ............... 32-35
Mazda
B2200 & B2600i ............. (2) 4.5 .................. 28
Miata .................... (2) 2.7-3.3 ................ 28
MPV
Dual Unit ................ (2) 2.7-3.3 ................ 51
Single Unit .............. (2) 2.7-3.3 ................ 37
MX-3 ....................... (2) 5.0 .................. 28
Page 320 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 6)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
MX-6 & 626 ................. (2) 4.3 .................. 26
Protege & 323 ............ (2) 3.9-4.6 ................ 28
Navajo ....................... 7.0 ................. 28-29
929 .......................... 3.6 .................... 28
RX7 ........................ 3.4-4.7 .................. 21
Mercedes-Benz
190E ....................... (2) 4.0 .................. 36
300D/E, 400E & 500E ........ (2) 5.4 .............. (6) 36
300SE/SD, 400SE
& 500SEL ................... (2) 5.4 .............. (7) 43
(1) - Total system capacity, unless otherwise noted.
(2) - Compressor refrigerant oil capacity.
(3) - Standard equipment on some models built after 5/1/93.
Use R-134a Swash Plate Compressor Oil (Part No. 2-90188-
300-0)on 2.3L and 2.6L engine. Use R-134a R-4 Compressor
Oil (Part No. 2-90222-320-0) on 3.1L engine. Use R-134a
Rotary Vane Compressor
Oil (Part No. 2-90188-301-0) on 3.2L engine.
(4) - Use R-134a refrigerant and PAG SP20 refrigerant oil.
(5) - Use R-134a refrigerant and ND-Oil 8 (Part No. 38899-
PR7-003).
(6) - Use R-134a refrigerant and Densooil 8 (Part No. A 001 989
08 03).
(7) - Use R-134a refrigerant and Densooil 8 (Part No. A 001 989
08 03).Use 50 ounces if equipped with rear passenger
compartment A/C-heater system.ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄREFRIGERANT OIL & REFRIGERANT CAPACITY (MITSUBISHI THRU SUBARU)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ (1) Oil Refrigerant
Application Ounces Ounces
Mitsubishi
Diamante
R-12 ....................... 5.4-6.0 ................ 34-38
R-134a ................... (3) 5.7-6.4 .............. 26-28
Diamante Wagon ............... 5.4 ..................... 28
Eclipse .................. (2) 2.0-3.4 ................. 33
Expo/Expo LRV
1.8L ..................... (2) 3.4-4.0 ................. 30
2.4L ..................... (2) 2.0-3.4 ................. 30
Galant ................... (2) 5.0-5.7 ................. 33
Mirage ................... (2) 4.4-5.1 .............. 26-30
Pickup ................... (2) 4.4-5.1 ................. 30
Montero .................. (2) 2.0-3.4 ................. 28
Precis ....................... 8.1 .................. 30-32
3000GT
R-12 ....................... 4.7-6.0 ................... 29
R-134a ................... (3) 4.7-6.0 .............. 26-28
Nissan
Page 323 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 9)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
process is completed, the amount of compressor oil removed must be
measured and the same amount added to A/C system.
DISCONNECTING LINES & FITTINGS
After system is discharged, carefully clean area around all
fittings to be opened. Always use 2 wrenches when tightening or
loosening fittings. Some refrigerant lines are connected with a
coupling. Special tools may be required to disconnect lines. Cap or
plug all openings as soon as lines are removed. DO NOT remove caps
until connections of lines and fittings are completed.
CONNECTING LINES & FITTINGS
NOTE: All R-134a based systems use 1/2-16 ACME threaded fittings.
Ensure all replacement parts match the connections of the
system being worked on.
Always use a new gasket or "O" ring when connecting lines or
fittings. Coat "O" ring with refrigerant oil and ensure it is not
twisted during installation. Always use 2 wrenches to prevent damage
to lines and fittings.
PLACING SYSTEM IN OPERATION
After component service or replacement has been completed and
all connections have been made, evacuate system thoroughly with a
vacuum pump. Charge system with proper amount of refrigerant and
perform leak test. See REFRIGERANT OIL & REFRIGERANT SPECIFICATIONS
article in GENERAL SERVICING for system capacities. Check all fittings
that have been opened. After system has been leak tested, check system
performance.
NOTE: Most compressors are pre-charged with a fixed amount of
refrigerant (shipping) oil. Drain compressor oil from new
compressor and add refrigerant oil to new compressor
according to amount removed from old compressor. Always
refer to underhood A/C specification label or A/C compressor
label while servicing A/C system.
ATSUGI
ROTARY VANE
1) Before checking and adjusting oil level, operate engine at
1200 RPM. Set controls at maximum cooling and high blower motor speed
for 10 minutes to return oil to compressor.
2) Stop engine. Discharge refrigerant and remove compressor
from vehicle. See SERVICING PRECAUTIONS. Drain compressor oil through
compressor discharge port and measure oil amount.
3) If amount drained is less than 3 ounces, conduct leak
tests at system connections. Repair or replace faulty parts as
Page 324 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 10)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
necessary. Check purity of oil and adjust oil level as follows.
4) If amount drained is 3 ounces or more, oil level is okay.
Fill with same amount drained, using new oil. If amount drained is
less than 3 ounces, pour in 3 ounces of new refrigerant oil.
COMPONENT REFRIGERANT OIL CAPACITIES (ATSUGI ROTARY VANE)ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄComponent Ounces
Condenser ....................................... 1.0-1.7
Evaporator ...................................... 1.5-2.5
Receiver-Drier .................................. 0.5-0.8
Refrigerant Lines (1) ........................... 1.0-1.7
(1) - Add only if a refrigerant oil leak is indicated.
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ BOSCH
6-CYLINDER
1) Before checking and adjusting oil level, operate
compressor at engine idle speed, and set controls at maximum cooling
and high blower motor speed for 20-30 minutes to return oil to
compressor.
2) Stop engine and discharge refrigerant. See SERVICING
PRECAUTIONS. Remove refrigerant oil level inspection plug on side of
compressor. Oil should be at lower lip of threaded hole. If oil level
is low, add new refrigerant oil as necessary. Replace inspection plug
and tighten to 10-12 ft. lbs. (14-16 N.m).
CALSONIC
V5 5-CYLINDER & V6 6-CYLINDER
Infiniti & Nissan
1) Before checking and adjusting oil level, operate engine at
1200 RPM. Set controls at maximum cooling and high blower motor speed
for 10 minutes to return oil to compressor.
2) Stop engine. Discharge refrigerant. See SERVICING
PRECAUTIONS. Measure the amount of oil drained/discharged into
refrigerant recovery/recycling equipment.
3) Remove compressor from vehicle. Drain compressor oil from
compressor drain plug and measure oil amount. Add this amount to
amount drained in step 2), to obtain total amount drained.
4) Fill compressor with total amount drained, using new oil.
If any major components of the system were also replaced, determine
the amount of additional oil needed. See appropriate COMPONENT
REFRIGERANT OIL CAPACITIES table for specified amount.
COMPONENT REFRIGERANT OIL CAPACITIES (CALSONIC V5)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Page 325 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 11)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
Component Ounces
Condenser ........................................ 1.0-1.7
Evaporator ....................................... 1.5-2.5
Receiver-Drier ................................... 0.5-0.8
Refrigerant Lines (1) ............................ 1.0-1.7
(1) - Add only if a refrigerant oil leak is indicated.ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄCOMPONENT REFRIGERANT OIL CAPACITIES (CALSONIC V6)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄComponent Ounces
Condenser ............................................ 2.5
Evaporator ........................................... 2.5
Receiver-Drier ....................................... 0.2
Refrigerant Lines (1) ................................ 1.0
(1) - Add only if a refrigerant oil leak is indicated.
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Subaru
1) Before checking and adjusting oil level, operate engine at
1000-1500 RPM. Set controls at maximum cooling and high blower motor
speed for 20 minutes to return oil to compressor.
2) Stop engine. Discharge refrigerant and remove compressor
from vehicle. See SERVICING PRECAUTIONS. Drain compressor oil from
compressor drain plug and measure oil amount.
3) Fill compressor with total amount drained, using new oil.
If any major components of the system were also replaced, determine
the amount of additional oil needed. See appropriate SUBARU COMPONENT
REFRIGERANT OIL CAPACITIES table for specified amount.
SUBARU COMPONENT REFRIGERANT OIL CAPACITIES (LEGACY)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄComponent Ounces
Compressor ........................................... 2.4
Condenser ............................................ 1.7
Evaporator ........................................... 2.4
Refrigerant Lines (1) ................................ 1.7
(1) - Add only if a refrigerant oil leak is indicated.
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄSUBARU COMPONENT REFRIGERANT OIL CAPACITIES (SVX)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄComponent Ounces
Compressor ........................................... 2.4
Condenser ............................................ 1.7
Page 326 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 12)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
Evaporator ........................................... 2.4
Refrigerant Lines (1) ................................ 1.7
(1) - Add only if a refrigerant oil leak is indicated.ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DIESEL KIKI
ROTARY VANE
1) Before checking and adjusting oil level, operate engine at
800-1000 RPM. Set controls at maximum cooling and high blower motor
speed for 20 minutes to return oil to compressor.
2) Stop engine. Discharge refrigerant and remove compressor
from vehicle. See SERVICING PRECAUTIONS. Remove oil drain plug and
measure amount of oil drained.
3) If amount drained is less than 3 ounces (1.7 ounces on Geo
Storm), conduct leak tests at system connections. Repair or replace
faulty parts as necessary.
4) If amount drained is more 3 ounces (1.7 ounces on Geo
Storm), oil level is okay. Fill compressor with same amount drained,
using new oil. If amount drained is less than 3 ounces (1.7 ounces on
Geo Storm), pour in 3 (1.7) ounces of new refrigerant oil.
5) When replacing other A/C system components, add the
following amount(s) of refrigerant oil. See COMPONENT REFRIGERANT OIL
CAPACITIES (DIESEL KIKI ROTARY VANE) table.
COMPONENT REFRIGERANT OIL CAPACITIES (DIESEL KIKI ROTARY VANE)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄComponent Ounces
Condenser ............................................... 1.7
Evaporator .............................................. 1.0
Receiver-Drier .......................................... 1.0
Refrigerant Lines ....................................... 0.3
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 5 & 6-CYLINDER
1) Before checking and adjusting oil level, operate engine at
800-1000 RPM. Set controls at maximum cooling and high blower motor
speed for 20 minutes to return oil to compressor.
2) Stop engine. Discharge refrigerant and remove compressor
from vehicle. See SERVICING PRECAUTIONS. Remove oil drain plug and
measure amount of oil drained.
3) If amount drained is less than 3 ounces, conduct leak
tests at system connections. Repair or replace faulty parts as
necessary.
4) If amount drained is more 3 ounces, oil level is okay.
Fill compressor with same amount drained, using new oil.
5) When replacing other A/C system components, add the
following amount(s) of refrigerant oil. See COMPONENT REFRIGERANT OIL
Page 328 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 14)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
2) Add one ounce of refrigerant oil when replacing
evaporator. Add1/2 ounce when replacing condenser. When replacing
receiver-drier or hoses, add 1/3 ounce per component replaced.
HARRISON
R4 4-CYLINDER
1) Before checking and adjusting oil level, operate engine at
800-1000 RPM. Set controls at maximum cooling and high blower motor
speed for 20 minutes to return oil to compressor.
2) Stop engine. Discharge refrigerant and remove compressor
from vehicle. See SERVICING PRECAUTIONS. Remove oil drain plug and
measure amount of oil drained.
3) If amount drained is less than one ounce, conduct leak
tests at system connections. Repair or replace faulty parts as
necessary. Fill compressor with 2 ounces, using new refrigerant oil.
4) If amount drained is more one ounce, oil level is okay.
Fill compressor with same amount drained, using new oil.
5) When replacing other A/C system components, add the
following amount(s) of refrigerant oil. See COMPONENT REFRIGERANT OIL
CAPACITIES (HARRISON R4 4-CYLINDER) table.
COMPONENT REFRIGERANT OIL CAPACITIES (HARRISON R4 4-CYLINDER)ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄComponent Ounces
Condenser ............................................... 1.0
Evaporator .............................................. 1.7
Receiver-Drier .......................................... 1.0
Refrigerant Lines ....................................... 0.3
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ V5 5-CYLINDER
1) If system is operable, run A/C system for several minutes
to stabilize system. Turn off engine. Discharge system and remove
compressor. See SERVICING PRECAUTIONS. Remove drain plug and measure
oil.
2) If one ounce or more is drained, add same amount. If less
than one ounce is drained, add 2 ounces of new refrigerant oil to
compressor.
3) If condenser is replaced, add one ounce. Add 3.5 ounces if
accumulator is replaced. If evaporator is replaced or if a large
refrigerant leak occurred, add 3 ounces of new refrigerant oil.
HITACHI
6-CYLINDER
1) Before checking and adjusting oil level, operate
compressor at 1000-1500 engine RPM, and set controls at maximum
Page 329 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 15)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
cooling and high blower motor speed for about 10 minutes to return oil
to compressor.
2) Stop engine. Discharge refrigerant and remove compressor
from vehicle. See SERVICING PRECAUTIONS. Drain oil from compressor
through suction port. Measure amount of oil drained.
3) If amount drained is 2.4 ounces or more, fill with same
amount using new oil. If amount drained is less than 2.4 ounces, fill
with 2.4 ounces. Install compressor and recharge.
4) If A/C components are replaced, add refrigerant oil to
system. Add 1.7 ounces if condenser is replaced. Add 2.4 ounces if
evaporator is replaced. Oil does not need to be added if receiver-
drier is replaced. Add 1.7 ounces of refrigerant oil only if a
refrigerant oil leak is indicated.
MATSUSHITA
ROTARY VANE
Geo (Prizm)
1) If system is operable, run A/C system for several minutes
to stabilize system. Turn off engine. Discharge system and remove
compressor. See SERVICING PRECAUTIONS. Remove drain plug and measure
oil.
2) If one ounce or more is drained, add same amount. If less
than one ounce is drained, add 2 ounces of new refrigerant oil to
compressor.
3) If condenser is replaced, add one ounce. Add 3.5 ounces if
receiver-drier is replaced. If evaporator is replaced or if a large
refrigerant leak occurred, add 3 ounces of new refrigerant oil.
Toyota
Discharge system. See SERVICING PRECAUTIONS. Remove
compressor from vehicle. Drain oil from compressor through inlet and
outlet ports. Fill compressor with 3.4-4.1 ounces of oil through
suction port. Add 0.7 ounces if receiver-drier was replaced. When
replacing condenser or evaporator, add 1.4-1.7 ounces of refrigerant
oil.
NIPPONDENSO
ROTARY VANE
1) Before checking and adjusting oil level, operate
compressor at engine idle speed, and set controls at maximum cooling
and high blower motor speed for 20-30 minutes to return oil to
compressor.
2) Stop engine. Discharge refrigerant and remove compressor
from vehicle. See SERVICING PRECAUTIONS. Drain compressor oil through
compressor intake and discharge ports. Measure amount drained.
3) Fill compressor with same amount as drained, plus one
ounce. When replacing condenser, add one ounce. When replacing
evaporator, add 1 1/2 ounces. When replacing receiver-drier, add 1/3
Page 332 of 920
A/C COMPRESSOR OIL CHECKING
Article Text (p. 18)
1993 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Wednesday, March 22, 2000 08:47PM
component replaced.
Honda
1) Discharge system. See SERVICING PRECAUTIONS. Remove
compressor from vehicle. Drain all oil from NEW compressor and fill
compressor with 4 ounces of clean refrigerant oil.
2) On Civic and Civic Del Sol, add 1 1/2 ounce of refrigerant
oil when replacing evaporator. Add 2/3 ounce when replacing condenser.
When replacing receiver-drier or hoses, add 1/3 ounce per component
replaced.
3) On Prelude, add one ounce of refrigerant oil when
replacing evaporator. When replacing other A/C components, add 1/3
ounce per component replaced (including hoses).
Hyundai
Add 1 1/2 ounces of refrigerant oil when replacing
evaporator. Add one ounce when replacing condenser. When replacing
receiver-drier, add 1/3 ounce of refrigerant oil.
5-CYLINDER
Mazda
Add one ounce of refrigerant oil when replacing condenser.
Add 1 2/3 ounce when replacing evaporator. When replacing receiver-
drier, add 1/2 ounce of refrigerant oil.
NOTE: Saab and Volvo (Sanden 5 or 7-cylinder) compressor oil
checking procedures are not available from manufacturer.
7-CYLINDER
Hyundai & Mitsubishi (Excel & Precis)
1) Before checking and adjusting oil level, operate
compressor at engine idle speed, and set controls at maximum cooling
and high blower motor speed for 20-30 minutes to return oil to
compressor.
2) Stop engine. Discharge refrigerant and remove compressor
from vehicle. See SERVICING PRECAUTIONS. Remove oil drain plug and
drain oil. Measure amount of oil drained. Install drain plug with new
"O" ring.
3) If amount drained is 2.3 ounces or more, fill compressor
with same amount using new oil. If amount drained is less than 2.3
ounces, fill with 2.3 ounces. Install filler plug. Install compressor
and recharge system.
COMPONENT REFRIGERANT OIL CAPACITIES (SANDEN 7-CYLINDER)ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄComponent Ounces
Condenser ............................................ 1.0
Evaporator ............................................. 3
Receiver-Drier ......................................... 1