service indicator YAMAHA XT660Z 2010 Owners Manual

INSTRUMENT AND CONTROL FUNCTIONS
4-16
1
2
3
4
5
6
7
8
9
10
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring in direction (a).
To decrease the spring preload and
thereby soften the suspension, turn
the adjusting ring in direction (b).
TIP
Align the appropriate notch in the ad-
justing ring with the position indicator
on the shock absorber.
EWAB0020
WARNING0
Never adjust the spring preload un-
til the exhaust system has cooled
down.
EWA10221
WARNING0
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
●Do not tamper with or attempt
to open the cylinder assembly.
●Do not subject the shock ab-
sorber assembly to an open
flame or other high heat
source. This may cause the unit
to explode due to excessive
gas pressure.
●Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
●Do not dispose of a damaged
or worn-out shock absorber
assembly yourself. Take the
shock absorber assembly to a
Yamaha dealer for any service.
EAUB1461
Adjusting the shock
absorber assembly
1. Spring preload adjusting ring
2. Position indicator
(a) Increasing the spring preload
(b) Decreasing the spring preload
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
ECA10100
NOTICE
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
Spring preload setting:
Minimum (soft):
1
Standard:
2
Maximum (hard):
9
XT660Z 04-04 ING-AUS:MY03 01-03 ING 11-05-2009 9:54 Pagina 4-16