Acura TSX 2013 Navigation Manual

130

Changing Your Destination
Entering a New Destination
Navigation
3.Rotate
i
to select an option.
Press
u
.

The route is automatically recalculated and displayed on the map screen.
The following options are available: •Set as New Destination
: Sets the location as your new destination.
•Add to Dest. List
: Sets the location as a new waypoint.
Entering a New DestinationHMENU button (when en route)
 Dest. MENU 1
or Dest. MENU 2
Enter a new destination using the Destination Menu screen even when you are
en route.
1.Enter a new destination. 2Entering a Destination
P. 68

After entering a new destination, the address is displayed on the Calculate Route screen.
2.Rotate
i
to select
OK
. Press
u
.
1Entering a New Destinationd
“Display Menu”
, d
“Display Navigation”
QRG

131

Changing Your Destination
Entering a New Destination
3.Rotate
i
to select an option.
Press
u
.

The route is automatically recalculated and displayed on the map screen.
The following options are available: •Set as New Destination
: Sets the location as your new destination.
•Add to Dest. List
: Sets the location as a new waypoint.
QRG
Navigation

132Navigation
Resuming Your TripStop your vehicle en route (e.g., to rest, st
op for gas, etc.), and then continue on
your route. If you did not complete your route, the Continue Trip screen is displayed when you restart your vehicle.
Rotate
i
to select
OK
. Press
u
.
You can continue on the
•Route Pref.
: Changes the route preferences (calculating method).
2Changing the Route Preference
P. 91
•View Routes
: Displays three different routes.
2Viewing the Routes
P. 92
•DESTINATION MAP
: Move
r to select
DESTINATION MAP
to display a map of
the destination. 2Viewing the Routes
P. 92
1Continuing Your TripThe Continue Trip screen has the same options as when you calculate a route. 2Calculating the Route
P. 90
To cancel your destination, press the CANCEL/ BACK button. Add to Address Book You can add the destination address to the address book. 2Adding an Address Book Entry
P. 37
Add to Dest. List You can add the address to
the Destination List.
2Editing the Destination List
P. 127
CallYou can place a phone ca
ll to the destination
phone number. 2Bluetooth® HandsFreeLink®
P. 174
QRG
same route.

133
Audio
This section describes how to operate the audio system. You can play
music from a wide array of media s
ources, and control the audio system
using the audio buttons, the Interface Dial, or voice control.
Audio System
.................................................. 134
About Your Audio System ..............................
134
Auxiliary Input Jack .........
..........
................
.....
135
Audio System Theft Protection .......................
135
Playing FM/AM Radio
..................................... 136
Selecting FM/AM Mode..................................
136
Audio Screen Control .....................................
136
Audio Menu ..................................................
137
Radio Data System (RDS) ................................
138
Playing XM® Radio
......................................... 140
Selecting XM Mode........................................
140
Audio Screen Control .....................................
140
Audio Menu ..................................................
141
Note Function ................................................
142
XM® Radio Service ........................................
144
Playing a Disc
................................................... 145
Selecting Disc Mode .......................................
145
Audio Screen Control .....................................
145
Audio Menu ...................................................
146
Playing MP3/WMA/AAC Discs ........................
147
Recommended Discs ......................................
148
Playing Hard Disc Drive (HDD) Audio
............ 149
Selecting HDD Mode ......................................
149
Audio Screen Control .....................................
150
Audio Menu ...................................................
150
Recording a Music CD to HDD........................
152
Searching for Music........................................
154
Adding a Track to a User Playlist .....................
155
Editing a Playlist .............................................
155
Displaying Music Information .........................
157
Updating Gracenote® Album Info ..................
158
Playing an iPod®
............................................. 159
Selecting iPod® Mode ....................................
160
Audio Screen Control .....................................
160
Audio Menu ...................................................
161
Searching for Music........................................
162
Searching for Music Using Song By Voice™ (SBV)
............................................................... 163
Playing a USB Flash Drive
............................... 164
Selecting USB Mode.......................................
165
Audio Screen Control.....................................
165
Audio Menu ..................................................
166
Playing Tracks in Folders.................................
167
Playing Bluetooth® Audio
............................. 168
Selecting Bluetooth® Audio Mode .................
168
Switching to HFL Mode ..................................
169
Audio Screen Control.....................................
169
Adjusting the Sound
....................................... 170
Audio Remote Controls
.................................. 171
Steering Wheel Controls ................................
171
QRG2013 TSX

134Audio
Audio SystemAbout Your Audio SystemThe audio system features FM/AM radio and XM
® Radio. It can also play audio discs,
WMA/MP3/AAC tracks, iPods®, USB flash drives, and
Bluetooth
® devices.
The audio system is operable from the butto
ns and switches on the panel, or the
remote controls on the steering wheel. The radio theft protection feature activates
if the audio system is disconnected from
electric power. You need to enter a radio code that comes with
your vehicle to
reactivate the disabled system.
1About Your Audio SystemXM® Radio is available on a subscription basis only. For more information on XM® Radio, contact your dealer.2XM® Radio Service
P. 144
XM® Radio is available in the United States and Canada, except Ha
waii, Alaska, and Puerto Rico.
XM is a registered trademark of Sirius XM® Radio, Inc. Video CDs, DVDs, and 3-inch (8-cm) mini discs are not supported. iPod® is a registered tra
demark owned by Apple
Inc. You can operate the audio system by voice commands. 2Audio Commands
P. 239
MP3 and AAC are standard audio compression formats. WMA is an audio compression format developed by Micr
osoft Corporation.
XM® Radio
Remote Control
iPod®
USB Flash Drive
QRG

135

Audio System
Auxiliary Input Jack
Auxiliary Input JackUse the jack in the console compartment
to connect standa
rd audio devices.
1.Open the AUX cover.2.Connect a standard audio device to the input jack using a 1/8 inch (3.5 mm) stereo miniplug.
The audio system automatically switches to the AUX mode.
Audio System Theft ProtectionThe audio system is disabled when it is
disconnected from the power source (e.g.,
when the battery is disc
onnected or goes dead.)
■Entering the Audio Security Code“ENTER CODE” appears on the displa
y when the power is reconnected.
1.Turn on the audio system.2.Enter the audio security code using the pr
eset buttons. If you enter an incorrect
digit, continue to the last digit, then
try again. If you do not enter the code
correctly after 10 tries, you need to vi
sit a dealer to have the system reset.
1Auxiliary Input JackTo switch the mode, press any of the other audio mode buttons. You can return to the AUX mode by pressing the AUX button. You cannot use the auxili
ary input jack if you
replace the audio system. 1Audio System Theft ProtectionFind the audio system’s security code and serial number on the radio code card.Do not store the card in your vehicle. If you lose the radio code card, you must obtain the information from a dealer.
QRG
Audio

136Audio
Playing FM/AM RadioSelecting FM/AM Mode1.Press the FM/AM button.
Press the FM/AM button again, if necessary, to select the frequency band (AM, FM1, FM2).
2.Select a station using the buttons (P
reset, SCAN) or bars (SKIP, TUNE).

On the FM bands, you can also use
the CATEGORY bar and TITLE button to
select a station provided by the Radio Data System (RDS).

The band and frequency are displayed on the display.
Audio Screen ControlHAUDIO button (in FM/AM mode)Control the audio system through the navigation screen.
1.Move
e to select a frequency band
(AM
, FM1
, or
FM2
).
2.Rotate
i
to select a preset
station. Press
u
.

Press and hold
u
until a beep
sounds to store the current station in a preset button.

Move
r to select
AUDIO
MENU
.
2Audio Menu
P. 137
1Playing FM/AM Radiod
“Display audio screen”
You can control the radio using voice control commands. 2Radio Commands
P. 239
A visual guide helps
you operate the audio
system. 2System Controls
P. 4

2Basic Operation
P. 6
The ST indicator comes on the display for stereo FM broadcasts. Stereo re
production in AM is not
available. The radio can receive the complete AM and FM bands: AM band: 530 to 1710 kHz FM band: 87.7 to 107.9 MHz You can store six AM stati
ons and 12 FM stations
in the preset buttons. FM1 and FM2 let you store six stations each.
Stereo indicator
Frequency band
Preset stations
QRG

137

Playing FM/AM Radio
Audio Menu
Audio MenuHAUDIO button (in FM/AM mode)
 AUDIO MENU
Rotate
i
to select an item. Press
u
.
The following items are available: •Sound Setup
: Displays the sound preferences screen.
2Adjusting the Sound
P. 170
•Read Radio Text
: Displays the text information
broadcast by the current RDS
station. 2Radio Text Display
P. 139
•RDS Search
: Searches for programs by RDS category.
2Searching for Programs by RDS Category
P. 138
•Scan
: Scans for stations with a strong signal in the current band and plays a 10-
second sample. Select
Scan
again to stop scanning and play the current selection.
•A.SEL (Auto Select)
: When set to
ON
, scans and automatically stores up to six
AM stations and 12 FM stations with a strong signal in the preset buttons.•Tune
: Tunes the radio to the frequency you select. Rotate
i
to select a
frequency.
1Audio MenuThe A.SEL indicator comes on the display when A.SEL
is ON
. If you do not like the stations Auto
Select has stored, you can change the frequencies stored in
the preset buttons
manually. Set
A.SEL
to
OFF
to restore the
previous preset button settings.
QRG
Audio

138

Playing FM/AM Radio
Radio Data System (RDS)
Audio
Radio Data System (RDS)Provides text data information related to
your selected RDS capable FM station.
Press the TITLE button to turn RDS informati
on on or off. When set to ON, the name
of the FM station is displayed on the displa
y. When set to OFF, the frequency of the
station is displayed. HAUDIO button (in FM/AM mode)
 AUDIO MENU
 RDS Search
Search for FM stations with a strong signal
that are broadcasting the selected RDS
category information.
1.Move
w
or
y
to
select
a search

method (
Seek Up
, Seek
Down
,
Scan
).
2.Rotate
i
to select a category.
Press
u
.

Scanning for stations in that category begins.

If there are no RDS-capable stations in the area, “NOTHING” briefly appears on the display.
■RDS Info Display■Searching for Programs by RDS Category
1RDS Info DisplayRDS information is displayed on the audio screen, if available.
QRG

139

Playing FM/AM Radio
Radio Data System (RDS)
HAUDIO button (in FM/AM mode)
 AUDIO MENU
 Read Radio Text
Display the radio text information of the selected RDS station.■Radio Text Display
1Radio Text DisplayThe RDS indicator comes on the display when the selected RDS station is
broadcasting text data.
QRG
Audio