Acura TSX 2013 Navigation Manual

70

Entering a Destination
Address
Navigation
AddressHMENU button
 Address
Enter an address to use as th
e destination. The state or pr
ovince you are currently in
is displayed (e.g., California).
Rotate
i
to select an item. Press
u
.
The following item
s are available:
•City
: Selects your destination city.
2Selecting a City
P. 72
•Street
: Selects your destination street.
2Selecting a Street
P. 73
•Change State
: Selects the state or province.
2Selecting the State or Province
P. 71
•ZIP code
: Enters the zip code to select the city.
2Selecting a City by Zip Code
P. 71
QRG

71

Entering a Destination
Address
HMENU button
 Address
 Change State
Rotate
i
to select a state from the
list. Press
u
.
HMENU button
 Address
 ZIP code
1.Enter the zip code of your destination.2.Move
r to select
OK
.
■Selecting the State or Province
1Selecting the State or ProvinceMove
w
to select
USA
for the American
mainland, Hawaii, and Puerto Rico. Move
y
to
select
Canada/AK
for Canada and Alaska.
■Selecting a City by Zip Code
1Selecting a City
by Zip Code
If your city is not listed,
it may be part of a larger
metropolitan area. Try entering the street first.
Continued
QRG
Navigation

72

Entering a Destination
Address
Navigation
3.Rotate
i
to select the destination
city from the list. Press
u
.

Next, you are prompted to enter a street name. 2Selecting a Street
P. 73
HMENU button
 Address
 City
The name of the city where you are currently located is displayed.
1.Enter the name of a different city, or move
r to select
OK
for the
current city.
Move
r to select
List
to display
a list of cities.
■Selecting a City
1Selecting a City by NameVehicle position may not
be displayed when:
•the automobile is traveling off-road.•the vehicle position da
ta cannot be updated.
You do not need to enter spaces or symbols (e.g., &, -, %). Partia
l matches are supported
(e.g., “ANGELES” to find “LOS ANGELES”). Using Voice Command (English only) Say
d
“City
” on the Find address by screen, and
the following screen is displayed: Say
d
“Current City”
to select your current
location, or say the name
of a different city.
2Selecting a Street
P. 73
QRG

73

Entering a Destination
Address
2.Rotate
i
to select your
destination city from the list. 
A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top
of
the list. Matching letters
are in yellow.

Next, you are prompted to enter a street name. 2Selecting a Street
P. 73
HMENU button
 Address
 Street
1.Enter the name of your destination
street.

Do not enter the street type (e.g., street, road, avenue) or direction (e.g., north, south, east, west).

Move
r to select
List
to display
a list of streets.
1Selecting a City by NameIf your city is not listed,
it may be part of a larger
metropolitan area. Try entering the street first.
Non-detailed area mark: Try entering the street first and then select the city. ■Selecting a Street
1Selecting a StreetWhen entering the names of major freeways, you can use the following abbreviations. For interstates, use an “I
” (e.g., I-10). For U.S.
freeways, use “US” (e.g., US-18). For state freeways, use the two-character state designation (e.g., CA-101). For county roads, use the appropriate desi
gnation (e.g., G-2).
Using Voice Command (English only)Say
d
“Street
” on the Find address by screen,
and the following screen is displayed:•Say the name of your
destination street, and
say the street number as
a string of individual
numbers.•Set the route to your destination. 2Calculating the Route
P. 90
Continued
QRG
Navigation
Press
u
.

74

Entering a Destination
Address
Navigation
2.Rotate
i
to select your
destination street from the list. Press
u
.

A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list. Matching letters are in yellow.
3.Enter the street number. Move
r
to select
OK
.

Only valid street numbers can be entered.
4.Set the route to your destination. 2Calculating the Route
P. 90
1Selecting a StreetIf you did not select a city
first and there is more
than one city with the specified street, a list of cities is displayed. Rotate
i
to select the desired city from the list.
Press
u.
QRG

75

Entering a Destination
Address Book
Address BookHMENU button
 Address Book
Select an address stored in your a
ddress book to use as the destination.
1.Rotate
i
to select your
destination from
the list. Press
u
.
2.Set the route to your destination. 2Calculating the Route
P. 90

Move
w
or
y
to display only
the entries in a category:
All
,
BUSINESS
, PERSONAL
, or other
categories you have created. 2Selecting an Address Book Category
P. 40
1Address BookIf you have PIN-protec
ted your address book,
enter your PIN when
prompted. Move
r to
select
OK
. PINs are optional.
2PIN Numbers
P. 42
You can select
New Address
on the Select an
address screen to add an entry to the address book. 2Adding an Address Book Entry
P. 37
To switch the list between Driver 1 or Driver 2, move
r.
QRG
Navigation

76

Entering a Destination
Previous Destination
Navigation
Previous DestinationHMENU button
 Previous Destination
Select an address from a list of your 50
most recent destinations to use as the
destination. The list is displayed with
the most recent destination at the top.
1.Rotate
i
to select a destination
from the list. Press
u
.
2.Set the route to your destination. 2Calculating the Route
P. 90
1Previous DestinationIf Previous Destination
is grayed out, there are
no previous destin
ations entered.
Your home addresses and addresses stored in your address book are not
added to the list of
previous destinations. You can delete unwanted
previous destinations
from the list. 2Previous Destinations
P. 43
QRG

77

Entering a Destination
Place Name
Place NameHMENU button
 Place Name
Enter the name of a place (e.g., busine
ss, hotel, restaurant) stored in the map
database to use as the destination.
1.Enter a place name.2.Move
r to select
LIST
to display a
list of matching hits.3.Rotate
i
to select a place name
from the list. Press
u
.

If the place name is in multiple categories, the categories are displayed when you select it. 2Place Name in Multiple Categories
P. 78
4.Set the route to your destination. 2Calculating the Route
P. 90
1Place NameThis option is convenient if you know the exact name of a place. Move
e to select
OPTION
to enter symbols and
accented letters, move
y
to select
SPACE
to
enter a space character, or move
w
to select
DELETE
to remove the last character.
Once a name is entered and selected, move
r to
select
SORT BY NAME
or
SORT BY DISTANCE
.
Matching letters are in yellow.Restaurants with a
z
icon have a ZAGAT®
review. Move
y
to select
z
to view the
complete ZAGAT® review. 2ZAGAT
P. 84
QRG
Navigation

78

Entering a Destination
Place Name
Navigation
If the place name is in multiple categorie
s in the map database,
the following screen
is displayed.
1.Rotate
i
to select a place name.
Press
u
.
2.Rotate
i
to select a subcategory.
Press
u
.
■Place Name in Multiple Categories
1Place Name in Multiple CategoriesMove
r to select
SORT BY CITY
or
SORT BY
DISTANCE
. Matching letters are in yellow.
QRG

79

Entering a Destination
Place Name
3.Rotate
i
to select a place.
4.Set the route to your destination. 2Calculating the Route
P. 90
QRG
Navigation
Press
u
.