set clock Alfa Romeo Giulietta 2012 Owner handbook (in English)

28
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
On/Trip B data (trip B on)
With this function is possible to turn the Trip B display (trip me-
ter) on and off. For more information see the “Trip computer” para-
graph.
For activation/deactivation, proceed as follows:
– briefly press the SET ESC button again: the display flashes On
or Off depending on what was previously set;
– press “
Ò▲“ or “▼“ to select;
– briefly press the SET ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out saving.
Set time (Clock)
With this function is possible to set the clock through two sub-
menus: “Time” and “Format”.
To carry out the adjustment, proceed as follows:
– briefly press SET ESC button: the display shows the two sub-
menus “Time” and “Format”;
– press “
Ò▲“ or“▼“ to go from one submenu to the next;
– once you have selected a submenu, briefly press SET ESC;
- when accessing the “Time” submenu: brefly pressing SET ESC
button: the minutes flash in the “time” mode;
– press “
Ò▲“ or“▼“ to select;
– brefly press SET ESC button: “the minutes” flash in the dis-
play;
– press “
Ò▲“ or“▼“ to select.
IMPORTANT The setting will increase or decrease by one unit each
time “
Ò▲“ or “▼“ is pressed. Hold the button down to in-
crease/decrease the setting rapidly. Complete the setting by re-
peatedly pressing the button when you approach the required set-
ting.

67
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
ADJUSTING THE AIR TEMPERATURE
Turn A or L knob to right or left to adjust the air temperature: A
knob for the front left-hand area, L knob for the front right-hand
area of the passenger compartment. The set temperatures are
shown on the display.
Press the MONO button to align the air temperature between the
two zones.
Turn L knob to go back to the separate management of air tem-
peratures in the two zones.
Turn the knobs fully clockwise or anti-clockwise to engage respec-
tively HI (maximum heating) or LO (maximum cooling). To de-
activate these functions, rotate the temperature knob to the de-
sired temperature.
SWITCHING THE CLIMATE CONTROL SYSTEM ON
The system can be turned on in different ways: you are recom-
mended to press the AUTO button and turn the knobs to set the re-
quired temperatures.
In this way the system operates completely automatically to ad-
just the temperature, quantity and distribution of the air introduced
into the passenger compartment. It also manages the air recircu-
lation system and the enablement of the air conditioning com-
pressor.
During fully automatic system operation, you can change at any
time the set temperatures, air distribution and fan speed by using
the relevant buttons or knobs: the system will automatically change
its settings to adjust to the new requirements.
During fully automatic operation (AUTO), the word AUTO will dis-
appear if the air distribution and/or flow rate and/or engagement
of the compressor and/or recirculation settings are changed.
In this way the climate control system will continue to automati-
cally manage all functions except for those that have been manu-
ally adjusted. There is only one fan speed in all the areas of the
passenger compartment.

94
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
MAINTENANCE/EMERGENCY
In case of emergency or maintenance the roof can be moved man-
ually when there is no power supply (opening/closing of the front
glass panel) by carrying out the following operations:
❍remove cap A-fig. 65 set between the two sun curtains;
❍take the Allen key B supplied, which is located in the on-board
documentation container or in the tool container in the luggage
compartment;
❍introduce the key into housing C and turn it:
– clockwise to open the roof;
– anti-clockwise, to close the roof.
fig. 65A0K0132m
INITIALISATION PROCEDURE
The sunroof must be re-initialised after disconnecting the battery
or if the relevant protection fuse is blown.
Proceed as follows:
❍press button B-fig. 63 until the roof is entirely closed. Then
release the button;
❍press B button and keep it pressed for at least 10 seconds
and/or until the glass panel clicks forwards. Release the but-
ton at this point;
❍press button B within 5 seconds of this operation and keep it
pressed: the glass panel will complete a full opening and clos-
ing cycle. Only release the button at the end of this cycle.