Screen Citroen C4 CACTUS 2016 1.G Service Manual

88
Rear wiper
Park.
Intermittent  wipe.
Wash-wipe
  (set   duration).
Rear
 
wiper   selection   ring:
Reverse gear
When reverse gear is engaged, the rear wiper w
ill   come   into   operation   automatically   if   the  
w

indscreen   wipers   are   operating.
Activation
  or   deactivation   of   this   automatic  
f

unction   can   be   set   in   the   touch   screen   tablet.
Windscreen wash
Pull the wiper stalk towards you. The windscreen   wash,   then   the   windscreen  
w

ipers,   operate   for   a   pre-determined   time.
Your
  vehicle   is   fitted   with   an   innovative  
w

indscreen   wash   system.
The
  screenwash   fluid   is   sprayed   all  
a

long   the   length   of   the   wiper   blade,   so  
a

voiding   impairment   of   the   driver's   view  
o

r   that   of   the   passengers.
F

Sel

ect the "
Driving assistance "
menu,
 
then
 
"
Vehicle settings ".
This
 
function
 
is
 
activated
 
by
 
default.
If
 
a
 
significant
 
accumulation
 
of
 
snow
 
or
 
i

ce
 
is
 
present,
 
or
 
when
 
using
 
a
 
bicycle
 
c

arrier
 
on
 
the
 
boot,
 
deactivate
 
the
 
a

utomatic
 
rear
 
wiper.
Lighting and visibility

89
Do not cover the rain sensor, linked with the   sunshine   sensor   and   located   in   the  
c

entre   of   the   windscreen   behind   the   rear  
v

iew   mirror.
Switch
  off   the   automatic   rain   sensitive  
w

ipers   when   using   an   automatic   car   wash.
In
  winter,   it   is   advisable   to   wait   until  
t

he   windscreen   is   completely   clear   of  
i

ce   before   activating   the   automatic   rain  
sen

sitive
 w
ipers.
Operating fault
If a fault occurs with the automatic rain sensitive wipers, the wipers will operate in
intermittent
  mode.
Have
  it   checked   by   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
The
 
windscreen
 
wipers
 
operate
 
automatically,
 w
ithout
 
any
 
action
 
on
 
the
 
part
 
of
 
the
 
driver,
 
if
 r
ain
 
is
 
detected
 
(sensor
 
behind
 
the
 
rear
 
view
 
m

irror),
 
adapting
 
their
 
speed
 
to
 
the
 
intensity
 
of
 
t

he
 
rainfall.
Switching on Switching off
The automatic r
ain sen sitive w indscreen w
ipers   must   be   reactivated   by   pushing  
t

he   control   stalk   downwards,   if   the  
i

gnition   has   been   off   for   more   than  
o

ne minute.
Briefly
 
push
 
the
 
control
 
stalk
 
d

ownwards.
A
 
wiping
 
cycle
 
confirms
 
that
 
the
 
i

nstruction
 
has
 
been
 
accepted.
This
 
warning
 
lamp
 
comes
 
on
 
in
 
the
 
i

nstrument
 
panel
 
and
 
a
 
message
 
is
 
d

isplayed. Briefly
  push   the   control   stalk
 d

ownwards   again,   or   place   the   control
 s

talk   in   another   position   (Int, 1   or   2).
Automatic rain sensitive
windscreen wipers
This warning lamp goes off in the instrument p
anel   and   a   message   is   displayed.
4
Lighting and visibility

90
Special position of the
windscreen wipers
To maintain the effectiveness of the flat wiper   blades,   it   is   advisable   to:
-
 
h
andle   them   with   care,
-
 
c
lean   them   regularly   using   soapy  
w

ater,
-
 
a
void   using   them   to   retain  
c

ardboard   on   the   windscreen,
-
 
r
eplace   them   at   the   first   signs   of  
w

e a r.
This
 
position
 
permits
 
release
 
of
 
the
 
windscreen
 w
iper
 
blades.
It
 
is
 
used
 
for
 
cleaning
 
or
 
replacement
 
of
 
the
 
w

iper
 
blades.
 
It
 
can
 
also
 
be
 
useful,
 
in
 
winter,
 
to
 
r

elease
 
the
 
wiper
 
blades
 
from
 
the
 
windscreen.
F
 
A

ny
 
action
 
on
 
the
 
wiper
 
stalk
 
within
 
o

ne minute
 
after
 
switching
 
off
 
the
 
ignition,
 
p

laces
 
the
 
wiper
 
blades
 
vertically
 
on
 
the
 
sc

reen.
F
 
T

o
 
park
 
the
 
wiper
 
blades
 
again,
 
switch
 
on
 
t

he
 
ignition
 
and
 
operate
 
the
 
wiper
 
stalk.
Lighting and visibility

94
Dynamic stability control
(DSC) and anti-slip regulation
(ASR)The DSC system offers exceptional safety   in   normal   driving,   but   this   should  
n

ot   encourage   the   driver   to   take   extra  
r

isks   or   drive   at   high   speed.
The
  correct   operation   of   the   system  
d

epends   on   observation   of   the  
ma

nufacturer's
 r
ecommendations
 r

egarding   the   wheels   (tyres   and   rims),  
t

he   braking   components,   the   electronic  
c

omponents   and   the   CITROËN  
a

ssembly   and   operation   procedures.
After
  an   impact,   have   the   system  
c

hecked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Activation
These systems are activated automatically each   time   the   vehicle   is   started.
As
  soon   as   they   detect   a   problem   of   grip   or  
t

rajectory,   these   systems   act   on   the   operation   if  
t

he   engine   and   brakes.
Deactivation
In exceptional conditions (starting a vehicle which   is   bogged   down,   stuck   in   snow,   on   soft  
g

round...),   it   may   be   advisable   to   deactivate  
t

he   DSC   system,   so   that   the   wheels   can   move  
f

reely   and   regain   grip.
This
 
is
 
indicated
 
by
 
flashing
 
of
 
this
 
w

arning
 
lamp
 
in
 
the
 
instrument
 
panel.
Operating fault
But it is recommended that the system be r eactivated   as   soon   as   possible.
F

P
ress the button or,
depending
  on   version,  
t

urn   the   knob   to   this  
p

osition.
The indicator lamp in the button or the knob   comes   on:   the   DSC   system   no l

onger   acts   on   the   operation   of   the   engine.
Reactivation
The system is reactivated automatically each time   the   ignition   is   switched   back   on   or   from  
3

0 mph   (50   km/h).F
 
P
ress   the   button   again  
t

o   reactivate   it   manually.If
  this   warning   lamp   comes   on,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message   in   the   screen,   this  
i

ndicates   a   fault   with   the   system.
Contact   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   system   checked.
Safety

95
Grip control
Special patented traction control system which improves   traction   on   snow,   mud   and   sand.
This
  system,   the   operation   of   which   has   been  
o

ptimised   for   each   situation,   allows   you   to  
m

anoeuvre   in   most   conditions   of   poor   grip  
(

encountered
 d
uring
 t
ouring
 u
se).
The
  accelerator   pedal   should   be   pressed  
s

ufficiently  
t
o  
a
llow  
t
he  
s
ystem  
t
o  
u
se  
t
he  
p
ower  
o

f   the   engine.   Operation   at   high   engine   speeds  
i

s   completely   normal.
Associated
  with   all-seasons   M+S   (Mud   and  
S

now)   205/50   R   17   tyres,   this   system   offers  
a

  compromise   between   safety,   adhesion   and  
t

raction.   These   tyres   work   equally   well   in   winter  
a

nd   summer.
A
  five-position   selector   allows   you   to   choose  
t

he   setting   best   suited   to   the   driving   conditions  
en

countered.
An
  indicator   lamp   associated   with   each   mode  
c

omes   on   to   confirm   your   choice.
A
  specific   and   additional   display   appears  
t

emporarily   in   the   touch   screen   to   confirm   the  
s

election   made   with   the   knob. Every
  time   the   ignition   is   switched   off,  
t

he   system   automatically   resets   to   this  
m

ode.
Differents
  modes   are   provided:
Standard (ESC)
This mode is calibrated for a low level of wheel s
pin,   based   on   the   different   levels   of   grip  
n

ormally   encountered   on   the   road.
F
 
P
lace   the   dial   in   this   position.
Snow
This mode adapts its strategy to the conditions of   grip   encountered   for   each   of   the   two   front  
w

heels   on   moving   off.
(mode
  active   up   to   30   mph   (50   km/h))
F
 
P
lace   the   dial   in   this   position.
5
Safety

101
Deactivating the passenger's
front airbag
Only the passenger's front airbag can be deactivated.
F

W
ith the ignition off ,
  insert   the   key   in   the  
p

assenger   airbag   deactivation   switch.
F

T
urn it to the "OFF"
 p
osition.
F
 
R
emove   the   key   keeping   the   switch   in   the  
n

ew   position.When
  the   ignition   is   on,   this   warning  
l

amp   comes   in   the   seat   belt   warning  
l

amps   display   screen.   It   stays   on  
w

hile   the   airbag   is   deactivated. To
  assure   the   safety   of   your   child,  
t

he   passenger's   front   airbag   must   be  
d

eactivated   when   you   install   a   rear ward  
f

acing   child   seat   on   the   front   passenger  
sea

t.
Other wise,   the   child   would   risk   being  
s

eriously   injured   or   killed   if   the   airbag  
w

ere   deployed.
Reactivating the passenger's
front airbag
When you remove a rearward facing 
child  sea
t, with the ignition off , turn the switch to
the "ON"
 

position   to   reactivate   the   airbag   and  
s

o   assure   the   safety   of   your   front   passenger   in  
t

he   event   of   an   impact.
Front airbags
Deployment
The airbags are deployed, except the passenger's   front   airbag   if   it   is   deactivated,   in   the e

vent   of   a   serious   front   impact   to   all   or   part   of   the
 f

ront   impact   zone   A,
  in   the   longitudinal   centreline
 o

f   the   vehicle   on   a   horizontal   plane   and   directed
 f

rom   the   front   to   the   rear   of   the   vehicle.
The
  front   airbag   inflates   between   the   thorax   and
 h

ead   of   the   front   occupant   of   the   vehicle   and   the
 s

teering   wheel,   driver's   side,   and   the   dashboard,
 p

assenger's   side   to   cushion   their   for ward
 m

ovement.
System
  which   protects   the   driver   and   front  
p

assenger   in   the   event   of   a   serious   front   impact  
i

n   order   to   limit   the   risk   of   injury   to   the   head   and  
t

horax.
The   driver's   airbag   is   fitted   in   the   centre   of   the  
s

teering   wheel;   the   front   passenger's   airbag  
i

s   fitted   in   the   roof   to   allow   more   space   in   the  
g

love   box.
When   the   ignition   is   switched   on,   this  
w

arning   lamp   comes   on   in   the   seat  
b

elt   warning   lamps   display   screen   for  
a

pproximately   one   minute   to   signal  
t

hat   the   front   airbag   is   activated.
5
Safety

125
Parking brake
ApplicationRelease
When parking on a slope, direct your w
heels   against   the   kerb,   apply   the  
p

arking   brake,   engage   a   gear   and  
s

witch   off   the   ignition.
When the vehicle is being driven, if this warning   lamp   and   the   STOP  warning   lamp  
c

ome   on,   accompanied   by   an   audible  
s

ignal   and   a   message   in   the   screen,   this  
i

ndicates   that   the   parking   brake   is   still   on  
o

r   has   not   been   fully   released.
F Pull  the   parking   brake   lever   up   to  i
mmobilise   your   vehicle. F
 P ull   the   parking   brake   lever   up   slightly,  p
ress the release button, then lower the
lever
 f

ully.
6
Driving

133
Stop & Start
Operation
Going into engine STOP
mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-
 
w

ith a manual gearbox , when stationary,
in
 
neutral,   and   you   release   the   clutch  
ped

al.
-
 
w

ith an electronic gearbox , when
stationary
  or   at   speeds   below   5   mph  
(

8 km/h)   (depending   on   version),   in   neutral  
(

control on N )
  or   when   you   press   the   brake  
ped

al. Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
The
  Stop   &   Start   system   does   not   affect  
t

he   the   vehicle's   other   systems,   such   as  
f

or   example   braking,   power   steering...
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams,
 
or
 o
ther...).
 
The
 
engine
 
restarts
 
automatically
 
-
 S
TART
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
o

ff.
 
The
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
a

nd
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary.
Stop & Start time
counter
A cumulative time counter for periods i n   STOP   mode   during   a   journey.
It
 
is
 
displayed   in   the   trip   computer   (accessible  
v

ia the " Driving assistance "
  menu   of   the  
t

ouch
 
screen   tablet).
It
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on.
The
 
Stop
 
&
 
Start
 
system
 
requires
 
t

he
 
use
 
of
 
a
 
12
 
V
 
battery
 
of
 
special
 t
echnology
 
and
 
specification.
 
All
 w
ork
 
on
 
this
 
type
 
of
 
battery
 
must
 
o

nly
 
be
 
done
 
by
 
a
 
CITROËN
 
dealer
 
o

r
 
a
 
qualified
 
workshop.
 
For
 
more
 
i

nformation
 
on
 
the
 
12
 
V
 
battery,
 
refer
 
to
 
t

he
 
corresponding
 
section.
6
Driving

135
A fault with the system is signalled in the " Driving assistance "
  menu  
(

primary   page)   of   the   touch   screen  
t

ablet.
Operating fault
In the event of a fault with the system, the   symbol   in   the button   changes   to   alert  
m

ode   and   the   indicator   lamp   flashes   for   a  
f

ew   moments   then   stays   on   continuously.
If you press this button to reactivate the
system,  the   indicator   lamp   flashes   again   for   a  
f

ew   moments   and   then   stays   on   continuously.
In
 
certain
 
circumstances,
 
such
 
as
 
the
 
need
 
t

o
 
maintain
 
a
 
comfortable
 
temperature
 
in
 
the
 
p

assenger
 
compartment,
 
it
 
may
 
be
 
preferable
 
t

o
 
deactivate
 
the
 
Stop
 
&
 
Start
 
system.
The
 
system
 
can
 
be
 
deactivated
 
at
 
any
 
time,
 
o

nce
 
the
 
ignition
 
is
 
on.
If
 
the
 
system
 
is
 
deactivated
 
while
 
in
 
S

TOP mode,
 
the
 
engine
 
then
 
restarts.
The
 
Stop
 
&
 
Start
 
system
 
is
 
automatically
 r
eactivated
 
every
 
time
 
the
 
engine
 
is
 
started.
Deactivation
The Stop & Start system can be deactivated a
nd   manually   reactivated   in   the   touch   screen  
t

ablet. F

Sel
ect "
Stop & Star t " in the
" Driving assistance "   menu.
When   the   system   is   deactivated,   the   indicator  
l

amp   in   this   button   comes   on   continuously.
When
  the   system   is   reactivated   manually,   the  
i

ndicator   lamp   in   this   button   goes   off.Have
  it   checked   by   a   CITROËN   dealer   or   a  q
ualified w orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.
All
  of   the   instrument   panel   warning   lamps  
come
  on.Depending
  on   version,   an   alert  
m

essage   may   also   be   displayed,   asking  
y

ou   to   change   to   neutral   (control   on   N)
and
  put   your   foot   on   the   brake   pedal.
You
  must   switch   off   the   ignition,   then  
s

tart   the   engine   again.
Before
 
doing
 
anything
 
under
 
the
 
b

onnet,
 
deactivate
 
the
 
Stop
 
&
 
Start
 
s

ystem
 
to
 
avoid
 
the
 
risk
 
of
 
injury
 
r

elated
 
to
 
an
 
automatic
 
change
 
to
 
S

TART mode.
Opening the bonnet
Driving on flooded roads
Before
 
driving
 
through
 
a
 
flooded
 
road,
 
i

t
 
is
 
strongly
 
recommended
 
that
 
you
 
d

eactivate
 
the
 
Stop
 
&
 
Start
 
system.
For
 
more
 
advice
 
on
 
driving,
 
particularly
 
o

n
 
flooded
 
roads,
 
refer
 
to
 
the
 
c

orresponding
 s

ection.
6
Driving

137
Switching on / Pause
F Turn wheel 1 to the "LIMIT" position:   the  s
peed   limiter   mode   is   selected   but   is   not  
s

witched   on   (Pause).
F
 
S
witch   the   speed   limiter   back   on   by  
p

ressing   button   4,
  if   the   speed   displayed  
i

s   suitable   (by   default,   the   last   speed  
pro

grammed).
F
 
Y
ou   can   temporarily   stop   the   the   speed  
l

imiter   by   pressing   button   4   again:   the  
d

isplay   confirms   that   it   has   been   stopped  
(

Pause). After
  first   selecting   speed   limiter   mode   (wheel   1
in position " LIMIT"),
  you   can   modify   the   speed  
s

etting   by:
-
 
a
  press   on   button   5:
F
 
t
he   six   speeds   memorised   are   displayed  
i

n the touch screen tablet,
F
 
c
hoosing   a   speed:   it   is   displayed   in   the  
in

strument
 pan
el.
T

he selection screen closes after a
few moments. Speed
  limits   can   be   memorised   in   the  
"

Driving assistance"
 
menu.
For
  more   information   on   memorising  
s

peeds,   refer   to   the   corresponding  
s

ection.
You
  do   not   have   to   switch   the   speed  
l

imiter   on   in   order   to   set   the   speed.
The   speed   limiter   is   switched on

manually:   it   requires   a   programmed  
s

peed   of   at   least   20   mph   (30   km/h).
Adjusting the speed limit
setting
Or:
-
 u sing   buttons   2   and   3,
  increasing   or  
d

ecreasing   the   speed   displayed:
F
 
b
y   successive   short   presses,   to   modify  
b

y   +   or   -   1   mph   (km/h),
F
 
b
y   a   maintained   press,   to   modify   in   steps  
o

f   +   or   -   5   mph   (km/h).
6
Driving