display INFINITI QX56 2011 Factory Repair Manual

AV
AV CONTROL UNITAV-57
< ECU DIAGNOSIS INFORMATION >
C
DE
F
G H
I
J
K L
M B A
O P
Fail-SafeINFOID:0000000006216226
When the ambiance temperature becomes extremely low or extremely high, AV control unit displays the mes-
sage and limits the AV control unit function.
FAIL-SAFE CONDITIONS
When the ambiance temperature is −20 °C ( −4 °F) or lower, or when it is 70 °C (158 °F) or higher
Display
The messages displayed on fail-safe conditions are as shown below:
DESCRIPTION OF CONTROLS
Ability Operation Mode
There is an ability operation mode for Fail-safes due to low or high ambiance temperature.
If HDD data can be read, fail-safe is shown, then normal displays are displayed only for functions which can be
operated.
RELEASE CONDITIONS OF FAIL-SAFE
Fail-safe is released on following conditions and normal mode is restored.
When The Temperature of HDD Is Low or High
If the ambient temperature becomes out of fa il-safe condition range, normal mode is restored.
DTC IndexINFOID:0000000006216227
SELF-DIAGNOSIS RESULTS DISPLAY ITEM
158 GroundRGB digital image signal
(+)
OutputIgnition
switch ON Not connected connector. 1.3 V
159 Ground Satellite radio antenna sig-
nal InputIgnition
switch ON Not connected satellite an-
tenna connector.
5.0 V
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
Fail-safe mode Display (display of the fail-safe condition)
When HDD temperature is low HDD system is experienci
ng problems due to extreme low temperature.
Normal operation will resume when temperature rises.
When HDD temperature is high HDD system is experienci
ng problems due to extreme high temperature.
Normal operation will resume when temperature drops.
Function When Fail-safe Function is activated
Air conditioner Operation Only multifunction switch (preset switch) can be operated.
Display
 LED of multifunction switch (preset switch) illuminates.
 Aimed temperature, blow angle, and flow rate are displayed in simplified mode.
Audio Operation Only ON/OFF and volume control operations by multifunction switch (preset switch) are possible.
Display No display (“Fail-safe mode” is displayed)
Camera Operation Image tone cannot be controlled.
Display Cannot be superimposed. (warning display, tone control display)
Hands-free phone Operation Cannot be operated.
Navigation Operation Cannot be operated.
Self diagnosis The display in simplified mode of fail-safe condition
CONSULT-III diagnosis Cannot be operated.
Revision: 2010 May2011 QX56

AV-58
< ECU DIAGNOSIS INFORMATION >
AV CONTROL UNIT
DTC Display item Refer to
U1000 CAN COMM CIRCUIT [U1000] AV- 11 8 , "
DiagnosisProcedure"
U1010 CONTROL UNIT (CAN) [1010] AV- 11 9 , "DTC Logic"
U1200 Cont Unit [U1200]AV- 1 2 0 , "DTC Logic"
U1201 GYRO NO CONN [U1201]AV- 1 2 1 , "DTC Logic"
U1202 G-SENSOR NO CONN [U1202]AV- 1 2 2 , "DTC Logic"
U1204 GPS COMM [U1204]AV- 1 2 3 , "Diagnosis Procedure"
U1205 GPS ROM [U1205]AV- 1 2 4 , "Diagnosis Procedure"
U1206 GPS RAM [U1206]AV- 1 2 5 , "Diagnosis Procedure"
U1207 GPS RTC [U1207]AV- 1 2 6 , "Diagnosis Procedure"
U1216 CAN CONT [U1216] AV- 1 2 7 , "DTC Logic"
U1217 BLUETOOTH MODULE [U1217]AV- 1 2 8 , "DTC Logic"
U1218 HDD CONN [U1218]AV- 1 2 9 , "Diagnosis Procedure"
U1219 HDD READ [U1219]AV- 1 3 0 , "Diagnosis Procedure"
U121A HDD WRITE [U121A] AV- 1 3 1 , "Diagnosis Procedure"
U121B HDD COMM [U121B]AV- 1 3 2 , "Diagnosis Procedure"
U121C HDD ACCESS [U121C] AV- 1 3 3 , "Diagnosis Procedure"
U121D DSP CONN [U121D]AV- 1 3 4 , "Diagnosis Procedure"
U121E DSP COMM [U121E]AV- 1 3 5 , "Diagnosis Procedure"
U1225 USB CONTROLLER [U1225] AV- 1 3 6 , "DTC Logic"
U1227 DVD COMM [U1227]AV- 1 3 7 , "Diagnosis Procedure"
U1228 SUB CPU CONN [U1228] AV- 1 3 8 , "DTC Logic"
U1229 iPod CERTIFICATION [U1229]AV- 1 3 9 , "DTC Logic"
U122A CONFIG UNFINISH [U122A]AV- 1 4 0 , "Diagnosis Procedure"
U122E Built-in AUDIO CONN [U122E] AV- 1 4 1 , "DTC Logic"
U1232 ST ANGLE SEN CALIB [1232]AV- 1 4 2 , "Diagnosis Procedure"
U1243 FRONT DISP CONN [U1243]AV- 1 4 3 , "Diagnosis Procedure"
U1244 GPS ANTENNA CONN [U1244]AV- 1 4 5 , "Diagnosis Procedure"
U1258 XM ANTENNA CONN [U1258]AV- 1 4 6 , "Diagnosis Procedure"
U125A 3RD DISP CONN [U125A] AV- 1 4 7 , "Diagnosis Procedure"
U1263 USB OVERCURRENT [U1263]AV- 1 4 8 , "Diagnosis Procedure"
U1264ANTENNA AMP TERMINAL [OPEN or
SHORT] [U1264] AV- 1 4 9 , "Diagnosis Procedure"
U1265
AMP ON TERMINAL [GND-SHORT or VB-
SHORT] [U1265] AV- 1 5 0 , "Diagnosis Procedure"
U1310 CONTROL UNIT (AV) [U1310]
AV- 1 5 2 , "DTC Logic"
Revision: 2010 May2011 QX56

AV
AV CONTROL UNITAV-59
< ECU DIAGNOSIS INFORMATION >
C
DE
F
G H
I
J
K L
M B A
O P
U1300
U1240  AV COMM CIRCUIT [U1300]
 SWITCH CONN [U1240]
AV- 1 5 1 , "
Description"
U1300
U1246 AV COMM CIRCUIT [U1300]
 VIDEO DIST CONN [U1246]
U1300
U125B  AV COMM CIRCUIT [U1300]
 AROUND CAMERA CONN [U125B]
U1300
U125C  AV COMM CIRCUIT [U1300]
 SONAR CONN [U125C]
U1300
U1240
U125C U125B  AV COMM CIRCUIT [U1300]
 SWITCH CONN [U1240]
 SONAR CONN [U125C]
 AROUND CAMERA CONN [U125B]
U1300
U1240
U125C U125B
U1246  AV COMM CIRCUIT [U1300]
 SWITCH CONN [U1240]
 SONAR CONN [U125C]
 AROUND CAMERA CONN [U125B]
 VIDEO DIST CONN [U1246]
DTC Display item Refer to
Revision: 2010 May2011 QX56

AV-60
< ECU DIAGNOSIS INFORMATION >
FRONT DISPLAY UNIT
FRONT DISPLAY UNIT
Reference ValueINFOID:0000000006216228
TERMINAL LAYOUT
PHYSICAL VALUES
JSNIA2241ZZ
Terminal
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
6—Shield —— — —
7—Shield —— — —
8
(W) Ground Camera image signal Input Ignition
switch ON At camera image is dis-
played.
9
(Y/L) Ground Communication signal
(DISP
→CONT) OutputIgnition
switch ON When adjusting display
brightness.
10
(Y/G) Ground Communication signal
(CONT
→DISP) InputIgnition
switch ON When adjusting display
brightness.
11
(Y/R) Ground Battery power supply Input Ignition
switch
OFF — Battery voltage
12
(B) Ground Ground — Ignition
switch ON —0 V
SKIB2251J
PKIB5039J
PKIB5039J
Revision: 2010 May2011 QX56

AV
FRONT DISPLAY UNITAV-61
< ECU DIAGNOSIS INFORMATION >
C
DE
F
G H
I
J
K L
M B A
O P18
(R) Ground Composite image signal Input Ignition
switch ON At DVD image is displayed.
19
(W) Ground Composite image signal
ground —Ignition
switch ON —0 V
20
(W/B) Ground Composite image synchro-
nizing signal InputIgnition
switch ON —
22 — Shield — — — —
23
(V) Ground ACC power supply Input Ignition
switch ACC — Battery voltage
27 — RGB digital image signal
(
− ) Input — — —
28 — RGB digital image signal
(+)
Input — — —
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB2251J
SKIB0825E
Revision: 2010 May2011 QX56

AV-62
< ECU DIAGNOSIS INFORMATION >
HEADREST DISPLAY UNIT
HEADREST DISPLAY UNIT
Reference ValueINFOID:0000000006216229
TERMINAL LAYOUT
PHYSICAL VALUES
JPNIA0007ZZ
Terminal
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
1
(L) Ground Ground — Ignition
switch ON —0 V
2
(V) Ground Battery power supply Input Ignition
switch
OFF — Battery voltage
3
(GR) Ground Ground — Ignition
switch ON —0 V
4
(L/R) Ground Battery power supply Input Ignition
switch OFF — Battery voltage
9
(B/R) Ground
Location recognition signal
for headrest display unit RH InputIgnition
switch
ON —0 V
10
(L/B) Ground Location recognition signal
for headrest display unit LH
InputIgnition
switch ON —0 V
11
(B) —AV communication signal
(H) Input/
Output —— —
12
(G) —AV communication signal
(H) Input/
Output —— —
13
(R) —
AV communication signal
(L) Input/
Output —— —
14
(W) —AV communication signal
(L) Input/
Output —— —
15 — Shield — — — —
18
(W/R) Ground ACC signal Input Ignition
switch OFF — 3.3 V
Ignition switch
ACC —0 V
Revision: 2010 May2011 QX56

AV
HEADREST DISPLAY UNITAV-63
< ECU DIAGNOSIS INFORMATION >
C
DE
F
G H
I
J
K L
M B A
O P
19
(L/Y) Ground Cont. ground — Ignition
switch ON —0 V
20
(W/L) Ground Image switch signal Output Ignition
switch ON When DVD, USB or front
AUX image is displayed on
headrest display unit.
0.5 V
When rear AUX image is
displayed on headrest dis-
play unit. 4.5 V
23
(R/L) Ground Composite image signal
ground
—Ignition
switch ON —0 V
24
(Y) Ground Composite image signal Input Ignition
switch ON When DVD, USB or front
AUX image is displayed on
headrest display unit.
25 — Shield — — — —
27
(R/W) Ground AV ground — Ignition
switch
ON —0 V
28 — Shield — — — —
30
(P) 29
(BR) Headphone sound signal
RH
InputIgnition
switch
ON Headphone sound output.
32
(SB) 31
(LG) Headphone sound signal
LH
InputIgnition
switch ON Headphone sound output.
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB2251J
SKIB3609E
SKIB3609E
Revision: 2010 May2011 QX56

AV-64
< ECU DIAGNOSIS INFORMATION >
VIDEO DISTRIBUTOR
VIDEO DISTRIBUTOR
Reference ValueINFOID:0000000006216230
TERMINAL LAYOUT
PHYSICAL VALUES
JSNIA3024ZZ
Terminal
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
1
(B) —Ground — Ignition
switch
ON —0 V
2
(Y/R) Ground Battery power supply Input Ignition
switch OFF — Battery voltage
3
(B) —Ground — Ignition
switch
ON —0 V
4
(V) Ground ACC power supply Input Ignition
switch ACC — Battery voltage
5
(V/W) Ground Cont. ground for headrest
display unit RH —Ignition
switch ON —0 V
6
(L/W) Ground ACC signal for headrest
display unit RH OutputIgnition
switch
OFF — 3.3 V
Ignition switch ACC —0 V
7
(W/R) Ground Cont. ground for headrest
display unit LH —Ignition
switch ON —0 V
8
(GR/R) GroundACC signal for headrest
display unit LH OutputIgnition
switch
OFF — 3.3 V
Ignition switch ACC —0 V
9
(O/B) Ground Image switch signal for
headrest display unit RH
InputIgnition
switch ON When DVD, USB or front
AUX image is displayed on
headrest display unit RH.
0.5 V
When rear AUX image is
displayed on headrest dis-
play unit RH. 4.5 V
Revision: 2010 May2011 QX56

AV
VIDEO DISTRIBUTORAV-65
< ECU DIAGNOSIS INFORMATION >
C
DE
F
G H
I
J
K L
M B A
O P
10
(R/B) Ground
Image switch signal for
headrest display unit LH InputIgnition
switch
ON When DVD, USB or front
AUX image is displayed on
headrest display unit LH.
0.5 V
When rear AUX image is
displayed on headrest dis-
play unit LH. 4.5 V
14
(B) 15
(G) Headphone sound signal
RH for headrest display unit
RH
OutputIgnition
switch ON Output headphone sound
from headrest display unit
RH to headphone.
16
(W) 17
(R) Headphone sound signal
LH for headrest display unit
RH
Output
Ignition
switch
ON Output headphone sound
from headrest display unit
RH to headphone.
18
(P/L) Ground
AV ground for headrest dis-
play unit RH —Ignition
switch
ON —0 V
19
(P) Ground AV ground for headrest dis-
play unit LH
—Ignition
switch ON —0 V
20
(B) 21
(G) Headphone sound signal
RH for headrest display unit
LH
Output
Ignition
switch
ON Output headphone sound
from headrest display unit
LH to headphone.
22
(W) 23
(R) Headphone sound signal
LH for headrest display unit
LH
OutputIgnition
switch ON Output headphone sound
from headrest display unit
LH to headphone.
27
(W) Ground Composite image signal
ground for headrest display
unit RH
—Ignition
switch ON —0 V
28
(R)
Ground Composite image signal for
headrest display unit RH
OutputIgnition
switch ON When DVD, USB, front
AUX or rear AUX image is
displayed on headrest dis-
play unit RH.
Te r m i n a l
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB2251J
Revision: 2010 May2011 QX56

AV-66
< ECU DIAGNOSIS INFORMATION >
VIDEO DISTRIBUTOR
29 — Shield — — — —
30 — Shield — — — —
31
(Y/L) Ground Composite image signal
ground for headrest display
unit LH
—Ignition
switch ON —0 V
32
(Y/G) Ground Composite image signal for
headrest display unit LH
OutputIgnition
switch ON When DVD, USB, front
AUX or rear AUX image is
displayed on headrest dis-
play unit LH.
33
(L) Ground
Composite image signal
ground —Ignition
switch
ON —0 V
34
(P) Ground Composite image signal Input Ignition
switch
ON When DVD, USB or front
AUX image is displayed on
headrest display unit LH or
RH.
35 — Shield — — — —
40
(LG) 39
(V) AUX image signal Input Ignition
switch ON When rear AUX image is
displayed on headrest dis-
play unit LH or RH.
41 — Shield — — — —
45
(W) 46
(R) Sound signal LH Input Ignition
switch
ON When DVD, USB or front
AUX mode is selected on
headrest display unit LH or
RH.
47
(B) 48
(G) Sound signal RH Input Ignition
switch ON When DVD, USB or front
AUX mode is selected on
headrest display unit LH or
RH.
49 — Shield — — — —
53 — Shield — — — — Terminal
(Wire color) Description
ConditionReference value
(Approx.)
+ – Signal name Input/
Output
SKIB2251J
SKIB2251J
SKIB2251J
SKIB3609E
SKIB3609E
Revision: 2010 May2011 QX56