display MAZDA MODEL CX-5 2017 Owner's Manual - RHD (UK, Australia) (in English)

The system consists of the ASL display and the speed limiter switch on the steering wheel.

Cruise control system
MODE switch
RES/+ switch
SET- switch
OFF/CAN switch CANCEL switch RES switch
OFF switch
MODE
switch
SET- switch SET+ switch
Active Driving Display
(Windscreen Type)
(Auto Flip-up Type)
Instrument Cluster Type A
(With Multi-information Display)
(Without Multi-information Display) Instrument Cluster Type B
Mazda Radar Cruise Control (MRCC) or
Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function)
When Driving
i-ACTIVSENSE
4-175
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Adjustable Speed Limiter (ASL) Display
The setting status of the ASL is
displayed in the active driving display (vehicles with active
driving display) or the displa y in the instrument cluster.
Stand-by display
Displays when the spee d limiter switch is operated and the system is turned on.
Turns off when the system is turned off.

Active Driving Display With Multi- information DisplayWithout Multi-
information Display
Setting display
With cruise control
Displays when the SET
switch is operated
and the speed is set.
With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Co ntrol with
Stop & Go function (MRCC with Stop & Go function)
Displays when the SET
or SET switch is operated an d the speed is set.

Active Driving Display With Multi-
information DisplayWithout Multi-
information Display
Cancel display
Displays when any of the follo
wing operations is done and the s ystem is temporarily
cancelled.
•OFF/CAN switch is operated
•Accelerator pedal is strongly depressed

Active Driving Display With Multi- information DisplayWithout Multi-
information Display
When Driving
i-ACTIVSENSE
4-176
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Adjustable Speed Limiter (ASL) M
ain Indication (White)/Adjustable Speed
Limiter (ASL) Set Indication (Green)
The indication has two colours.
ASL main indication (white)
The indication is display in white when the MODE switch is pres sed and the ASL is
activated.
ASL set indication (green)
The indication is display in green when a speed has been set.
▼ Speed Limiter Warning Beep
Instrument cluster type A
If the vehicle speed exceeds the set speed by about 5 km/h (3 mph) or faster, the background
of the ASL set speed indication turns amber and flashes three t
imes. In addition, a warning
sound is activated at the same time. The indication stops flash ing and remains on if the
vehicle speed continues to exceed the set speed by about 5 km/h (3 mph) or faster, and the
indication and warning sound remain on until the vehicle is dri ven at the set speed or slower.
Instrument cluster type B
If the vehicle speed exceeds the set speed by about 5 km/h (3 mph) or more, a warning
sound operates continuously and the ASL display flashes at the same time. The warning
sound operates and the display flashes until the vehicle speed decreases to the set speed or
less.
Verify the safety of the surrounding area and adjust the vehicl e speed by applying the
brakes. Additionally, keep a safer distance from the vehicles b ehind you.

Active Driving Display With Multi-
information DisplayWithout Multi-
information Display
When Driving
i-ACTIVSENSE
4-177
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

CAUTION
(With cruise control)
If the set speed is set lower than the current vehicle speed by pressing the SET
or RES/
switch, the warning beep is not activated for about 30 seconds even if the vehicle speed is
faster than the newly set speed by 5 km/h (3 mph). Be careful not to drive over the set speed.
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function))
If the set speed is set lower than the current vehicle speed by pressing the SET
or RES switch,
the warning beep is not activated for about 30 se conds even if the vehicle speed is faster than
the newly set speed by 5 km/h (3 mph). Be careful not to drive over the set speed.
NOTE
When the system is temporarily cancelled by depressing the accelerator pedal fully, the ASL
display shows the cancel display. If the vehicle speed exceeds the set speed by about 5 km/h
(3 mph) or more while the cancel display is displayed, the set speed display flashes but the
warning sound is not operated.
▼ Activation/Deactivation
NOTE
When the ignition is switched of
f, the system status before it was turned off is maintained.
For example, if the ignition is switched off while the ASL is operating, the system will be
operable when the ignition is switched ON the next time.
Activation
Press the MODE switch to operate the system. The ASL screen is displayed, and the ASL
main indication displays in white.
NOTE
When the cruise control, Mazda Radar Cruise Control (MRCC), or Mazda Radar Cruise
Control with Stop & Go function (MRCC with Stop & Go function) system becomes
operable after pressing the MODE switch, press the mode switch again to switch to the ASL.
Deactivation
To deactivate the system, do the following operations:
When a cruising speed h as been set (ASL set indication displays in green)
Long-press the OFF/CAN switch or press the OFF/CAN switch 2 times. The ASL screen is
no longer displayed and the ASL set indication (green) does not display.
When Driving
i-ACTIVSENSE
4-178
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

When a cruising speed has not been set (ASL main indication displays in white)
Press the OFF/CAN switch. The ASL screen is no longer displayed and the ASL main
indication (white) does not display.
NOTE
When the MODE switch is presse d while the ASL is operating, the system switches to the
cruise control, Mazda Radar Cruise Control (MRCC), or Mazda Radar Cruise Control with
Stop & Go function (M RCC with Stop & Go function) system.
▼Setting the System
WA R N I N G
Always verify the safety of the surrounding area when setting the ASL:
If the speed is set lower than the current vehicle speed, the vehicle speed is decreased to the
set speed. Verify the safety of the surroundi
ng area and keep a safer distance between
vehicles ahead and behind you.
1. Press the MODE switch to turn the system on.
2. (With cruise control)
Press the SET
to set the speed. When the current vehicle speed is 30 km/h (2 0 mph) or
more, the speed is set to the cu rrent vehicle speed. When the c urrent vehicle speed is less
than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise C ontrol with
Stop & Go function (MRCC with Stop & Go function))
Press the SET
or SET to set the speed. When the current vehicle speed is 30 km/h
(20 mph) or more, the speed is set to the current vehicle speed . When the current vehicle
speed is less than 30 km/h (20 mph), the speed is set to 30 km/ h (20 mph).
3. (With cruise control)
To increase the set speed, press the RES
switch continuously. The set speed can be
adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the RES
switch momentary. For example, the set
speed increases about 4 km/h (4 mph) by pressing the RES
switch 4 times.
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise C ontrol with
Stop & Go function (MRCC with Stop & Go function))
To increase the set speed, press the SET
switch continuously. The set speed can be
adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the SET
switch momentary. For example, the set
speed increases about 4 km/h (4 mph) by pressing the SET
switch 4 times.
When Driving
i-ACTIVSENSE
4-179
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

4. To decrease the set speed, press the SET switch continuously. The set speed can be
adjusted in 10 km/h (5 mph) decrements. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the SET
switch momentary. For example, the set
speed decreases about 4 km/h (4 mph) by pressing the SET
switch 4 times.
NOTE
•(With cruise control)
When the vehicle set speed is displayed in the instrument cluster, press the RES/
switch
to set the displayed vehicle speed.
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go function))
When the vehicle set speed is displayed in the instrument cluster, press the RES switch to
set the displayed vehicle speed.
•The system is temporarily cancelled when the vehicle is accelerated by depressing the
accelerator pedal strongly, however, it resumes when the vehicle speed decreases to the
set speed or less.
•The vehicle speed may exceed the set speed on a down slope.
▼ Temporarily Cancelling the System
The system is temporarily cancelled (stand-by status) when any
of the following operations
is done while the ASL is displayed.
•OFF/CAN switch is pressed
•Accelerator pedal is strongly depressed
With cruise control
Press the RES/
switch to resume the operation at the previous set speed. The ASL display
remains displayed.
With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Co ntrol with
Stop & Go function (MRCC with Stop & Go function)
Press the RES switch to resume the operation at the previous se t speed. The ASL display
remains displayed.
NOTE
•(With cruise control)
The set speed can be set by pressing the SET
switch while the system is in stand-by
status.
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go function))
The set speed can be set by pressing the SET
or SET switch while the system is in
stand-by status.
•The ASL is not cancelled by depressing the brake pedal.
When Driving
i-ACTIVSENSE
4-180
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Advanced Smart City Brake Support (Advanced SCBS)
(Except Indonesia and Taiwan)
*
The Advanced SCBS alerts the driver of a possible collision usi ng the display and a warning
sound when the Forward Sensing Camera (FSC) detects a vehicle a head or pedestrian and
determines that a collision with the object is unavoidable whil e the vehicle is driven at a
vehicle speed of about 4 to 80 km/h (2 to 50 mph) if the object is a vehicle ahead and about
10 to 80 km/h (6.2 to 50 mph) if the object is a pedestrian. In addition, the system reduces
damage in the event of a collision by operating the brake contr ol (Advanced SCBS brake)
when the system determines that a collision is unavoidable. In addition, when the driver
depresses the brake pedal, the brakes are applied firmly and qu ickly to assist. (Brake Assist
(Advanced SCBS brake assist))

Forward Sensing
Camera (FSC)
WA R N I N G
Do not rely completely on the Advanced SCBS system:
 The Advanced SCBS system is only designed to reduce damage in the event of a collision.
Over reliance on the system leading to the accelerator pedal or brake pedal being
mistakenly operated could result in an accident.
 The Advanced SCBS system operates in response to a vehicle ahead or a pedestrian. The
system does not operate in response to obstru ctions such as a wall, 2-wheeled vehicles, or
animals.
When Driving
i-ACTIVSENSE
*Some models.4-181
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

•(Manual transaxle)
If the vehicle is stopped by the SCBS operation and the clutch pedal is not depressed, the
engine stops.
▼Smart City Brake Support (SCBS)
Indicator Light (Red)
If the Advanced SCBS is operating, the
indicator light (red) flashes.

▼Collision Warning
If there is the possibili
ty of a collision with
a vehicle ahead, the beep sounds
continuously and a warning is indicated in
the multi-information di splay or the active
driving display.
Multi-information Display
Active Driving Display
NOTE
The operation distance and volume of the
collision warning can be changed. Refer
to Personalisation Features on page 9-
12.
▼ Automatic Brake Operation Display
“SCBS Automatic Brake” is indicated in
the multi-informatio
n display after the
Advanced SCBS brakes or the brake assist
(Advanced SCBS brake assist) is operated.
NOTE
•The collision warning beep sounds
intermittently while the Advanced SCBS
brake or brake assist (Advanced SCBS
brake assist) is operating.
•If the vehicle is stopped by the Advanced
SCBS operation and the brake pedal is
not depressed, the warning beep sounds
one time after about 2 seconds and the
Advanced SCBS brake is automatically
released.
When Driving
i-ACTIVSENSE
4-183
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Smart City Brake Support [Forward] (SCBS F)
(Indonesia and Taiwan)
*
The SCBS F system alerts the dri ver of a possible collision using an indication in the
display and a warning sound when the Forward Sensing Camera (FS C) detects a vehicle
ahead and determines that a collis ion with a vehicle ahead is u navoidable while the vehicle
is being driven at a vehicle speed of about 4 to 80 km/h (2 to 50 mph). In addition, the
system reduces damage in the event of a collision by operating the brake control (Smart City
Brake Support (SCBS) brake) when the system determines that a c ollision is unavoidable
while the vehicle is being driven at a vehicle speed of about 4 to 30 km/h (2 to 18 mph). It
may also be possible to avoid a collision if the relative speed between your vehicle and the
vehicle in front of you is less than about 20 km/h (12 mph). In addition, when the driver
depresses the brake pedal while the system is in the operation range at about 4 to 30 km/h (2
to 18 mph), the brakes are applied firmly and quickly to assist . (Brake Assist (Smart City
Brake Support (SCBS) brake assist))

Forward Sensing
Camera (FSC)
WA R N I N G
Do not rely completely on the SCBS F system:
 The SCBS F system is only designed to reduce damage in the event of a collision. Over
reliance on the system leading to the accele rator pedal or brake pedal being mistakenly
operated could result in an accident.
 The SCBS F is a system which operates in resp onse to a vehicle ahead. The system may not
be able to detect or react to 2-wheeled vehicles or pedestrians.
When Driving
i-ACTIVSENSE
*Some models.4-185
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

•If you suddenly come close to a vehicle ahead.
•2-wheeled vehicles, pedestrians, animals or standing trees.
•Vehicle is driven with some of the tyres having significant wear.
•(Manual transaxle)
If the vehicle is stopped by the Smart City Brake Support (SCBS) operation and the clutch
pedal is not depressed, the engine stops.
▼Smart City Brake Support (SCBS)
Indicator Light (Red)
If the Smart City Bra
ke Support (SCBS) is
operating, the indicator light (red) flashes.

▼ Collision Warning
If there is the possibili
ty of a collision with
a vehicle ahead, the beep sounds
continuously and a warning is indicated in
the multi-information di splay or the active
driving display.
Multi-information Display
Active Driving Display
NOTE
The operation distance and volume of the
collision warning can be changed. Refer
to Personalisation Features on page 9-
12.
▼ Automatic Brake Operation Display
“SCBS Automatic Brake” is indicated in
the multi-informatio
n display after the
SCBS_F brakes or the brake assist
(SCBS_F brake assist) is operated.
NOTE
•The collision warning beep sounds
intermittently while the SCBS_F brake
or brake assist (SCBS_F brake assist) is
operating.
•If the vehicle is stopped by the SCBS_F
operation and the brake pedal is not
depressed, the warning beep sounds one
time after about 2 seconds and the
SCBS_F brake is automatically
released.
When Driving
i-ACTIVSENSE
4-187
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2