display MAZDA MODEL CX-5 2017 - RHD (UK, Australia) (in English) Manual PDF

Indication on displayDistance between vehi-
cles guidelines
(During travel at about 40 km/h (25 mph) Distance between vehi-
cles guidelines
(During travel at about 80 km/h (50 mph)
Multi-information dis-
play Active driving display
Flashes in white*2
About 10 m (32 ft) or less About 20 m (65 ft) or less
*1 The distance between vehicles differs depending on vehicle spe
ed.
*2 Indication when the distance setting for notifying the driver that the vehicle approaches
a vehicle ahead is Near.
When Driving
i-ACTIVSENSE
4-130
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Driver Attention Alert (DAA)*
The DAA is a system which detects driver fatigue and decreased attentiveness, and
encourages the driver to take a rest.
When the vehicle is d riven inside traffic lane lines at about 65 to 140 km/h (41 to 86 mph),
the DAA estimates the amount of accumulated fatigue and decreas ed attentiveness of the
driver based on the information from the Forward Sensing Camera (FSC) and other vehicle
information, and encourages the driver to take a rest using an indication on the
multi-information display and a warning sound.
Use the DAA on expressways or highways.
Refer to Forward Sensing Camera (FSC) on page 4-196.
WA R N I N G
Do not rely completely on DAA and always drive carefully:
The DAA detects driver fatigue and decreased atte ntiveness and encourages the driver to take
a rest, however, it is not designed to prevent the vehicle from straying. If you rely too much on
the DAA it could lead to an accident. Drive carefully and operate the steering wheel
appropriately.
In addition, the system may not be able to detect driver fatigue and decreased attentiveness
correctly depending on the traffic and driving conditions. The driver must take sufficient rest
in consideration of safer driving.
NOTE
•The DAA operates when all of the following conditions are met.
When Driving
i-ACTIVSENSE
*Some models.4-131
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

•The vehicle speed is about 65 to 140 km/h (41 to 86 mph).
•The system detects white (yellow) lane lines.
•The system has completed learning of the driver’s driving data.
•The DAA does not operate under the following conditions.
•The vehicle speed is less than about 65 km/h (41 mph).
•The vehicle speed exceeds about 140 km/h (86 mph)
•The vehicle is making a sharp turn.
•The vehicle is changing lanes.
•The DAA may not operate normally under the following conditions.
•White (yellow) lane lines are less visible because of dirt or fading/patchiness.
•The vehicle is jolted or swayed continuously by strong winds or rough roads.
•The vehicle is driven aggressively.
•When making frequent lane changes.
•The DAA detects driver fatigue and decrease d attentiveness based on the driving data
when the vehicle is driven at about 65 to 140 km/h (41 to 86 mph) for about 20 minutes.
The driving data will be reset under the following conditions.
•The vehicle is stopped for 15 minutes or longer.
•The vehicle is driven at less than about 65 km/h (41 mph) for about 30 minutes.
•The ignition is switched off.
•After the DAA has displayed the first message encouraging rest, it does not display the
next one until 45 minutes have passed.
▼ Driver Attention Alert (DAA)
Display
When the system detects driver fatigue or
decreased attentiveness, it activates the
warning sound and displays an alert in the
multi-information display.
▼ Cancelling Driver
Attention Alert
(DAA)
The DAA can be set to not activate.
Refer to Personalisation Features on page
9-12.
When Driving
i-ACTIVSENSE
4-132
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Mazda Radar Cruise Control (MRCC) (Manual Transaxleand Taiwan)
*
The MRCC system is designed to maintain headway control*1 with a vehicle ahead
according to your vehic le's speed using a radar sensor (front) to detect the distance to the
vehicle ahead and a preset vehicle speed without you having to use the accelerator or brake
pedals.
*1 Headway Control: Control of the distance between your vehicle and the vehicle ahead
detected by the MRCC system.
Additionally, if your vehicle s tarts closing in on the vehicle ahead such as if the vehicle
ahead brakes suddenly, a warning sound and a warning indication in the display are
activated simultaneously to alert you to maintain a sufficient distance between the vehicles.
Also refer to the following before using the MRCC.
•Radar sensor (front) (page 4-201)
WA R N I N G
Do not rely completely on the MRCC:
The MRCC system has detection limitations depe nding on the type of vehicle ahead and its
conditions, the weather conditions, and the road conditions. Additionally, the system may be
unable to decelerate sufficiently to avoid hittin g the vehicle ahead if the vehicle ahead applies
the brakes suddenly or another vehicle cuts into the driving lane, which could result in an
accident.
Always drive carefully and verify the surrounding conditions and depress the brake pedal or
accelerator pedal while keeping a safer distance from vehicles ahead or on-coming vehicles.
Do not use the MRCC system in the following locations, using the MRCC system at the
following locations may result in an unexpected accident:
 General roads other than highways (Driving under these conditions using the MRCC system
is not possible.)
 Roads with sharp curves and where vehicle tr affic is heavy and there is insufficient space
between vehicles.
 Roads where frequent and repetitive accelerati on and deceleration occur (Driving under
these conditions using the MRCC system is not possible).
 When entering and exiting interchanges, servic e areas, and parking areas of highways (If
you exit a highway while headway control is in use, the vehicle ahead will no longer be
tracked and your vehicle may a ccelerate to the set speed).
 Slippery roads such as ice or snow-bound roads (Tyres could spin causing you to lose
vehicle control, or the stop hold control may not operate.)
When Driving
i-ACTIVSENSE
*Some models.4-137
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Mazda Radar Cruise Control
(MRCC) Display Indication
The MRCC setting status and oper ation conditions are indicated on the multi-information
display and the active driving display.
MRCC Distance
between vehicle
display
MRCC Set vehicle speed Vehicle ahead display
Vehicle ahead display
MRCC Distance
between vehicle
display
MRCC Set
vehicle speed
Active driving display
Active Driving Display (Windscreen Type)
Active Driving Display (Auto Flip-up Type)
Multi-information displayMRCC Distance
between vehicle
display
MRCC Set vehicle speed Vehicle ahead display
Vehicle ahead display
MRCC Distance
between vehicle
display
MRCC Set
vehicle speed
Active driving display
Multi-information display
When Driving
i-ACTIVSENSE
4-139
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

If there is a problem with the MRCC system, a message is displayed on the
multi-information disp lay. Check the centre display to verify the problem and then have
your vehicle inspected by an expert repairer, we recommend an A uthorised Mazda Repairer.
Refer to Message Indicated on Display on page 7-61.
▼ Close Proximity Warning
If your vehicle rapidly closes in
on the vehicle ahead because the vehicle ahead applies the
brakes suddenly while you are travelling in headway control, th e warning sound activates
and the brake warning is indicated in the display. Always verif y the safety of the
surrounding area and depress the brake pedal while keeping a sa fer distance from the
vehicle ahead. Additionally, keep a safer distance from the veh icles behind you.
Multi-information Display
Active Driving Display
NOTE
In the following cases, the warnings and brakes may not operate even if your vehicle starts
closing in on the vehicle ahead.
•You are driving your vehicle at the same speed as the vehicle ahead.
•Directly after the MRCC system has been set.
•Directly after the accelerator pedal is released.
•Another vehicle cuts into the driving lane.
▼Setting the System
The MRCC system operates when all of the following conditions a
re met.
•The vehicle speed is as follows:
•(European models)
About 30 km/h (19 mph) to 200 km/h (124 mph)
•(Except European models)
About 30 km/h (19 mph) to 145 km/h (90 mph)
•The MRCC is turned on.
•The brake pedal is not depressed.
•The electric parking brake (EPB) is released (electric parking brake (EPB) indicator light
is turned off).
When Driving
i-ACTIVSENSE
4-140
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

•There is no problem with the DSC.
•All the doors are closed.
•The driver's seat belt is fastened.
(Manual transaxle)
•The shift lever is in a position other than reverse (R) or neutral (N).
•The clutch pedal is not depressed.
(Automatic transaxle)
•The selector lever is in the drive (D) position or manual (M) p osition (manual mode).
CANCEL switchRES switch
OFF switch
switch switch
MODE switch
SET- switch
SET+ switch
Turning on the system
When the MODE switch is pressed
once, the MRCC system turns on, and the MRCC main
indication (white) turns on and the vehicle speed and the dista nce between the vehicles
while in headway co ntrol can be set.
In addition, the MRCC system disp lay indication is displayed on the multi-information
display and the active driving display at the same time.
NOTE
•If the ignition is switched off while the MRCC system is operating, the system will be
operable when the ignition is switched ON the next time.
•(European models)
When the MODE switch is pressed a second time while the MRCC system is operating,
the system switches to the Ad justable Speed Limiter (ASL).
Refer to Adjustable Speed Limiter (ASL) on page 4-174.
When Driving
i-ACTIVSENSE
4-141
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

•(Except European models)
When the MODE switch is pressed a second time while the MRCC system is operating,
the system switches to the cruise control function.
Refer to Cruise Control Function on page 4-146.
How to set the speed
1. Adjust the vehicle speed to the desired setting using the acc elerator pedal.
2. Headway control begins when the SET
or SET switch is pressed.
The set speed and the inter-vehicle distance display filled wit h white lines is displayed.
The MRCC main indication (white) switches to the MRCC set indication (green) at the
same time.
Travel status Indication on multi-information
display Indication on active driving dis-
play
During travel at constant speed
During travel under headway con-
trol
NOTE
•If a vehicle ahead is detected while travel ling at a constant speed, the vehicle-ahead
indication is displayed and headway control is performed. Additionally, when a vehicle
ahead is no longer detected, the vehicle-ahead indication turns off and the system
switches back to travel at constant speed.
•The lowest possible speed which can be set on the MRCC system is 30 km/h (19 mph).
•Headway control is not possible if the vehicle ahead is driving faster than your vehicle's
set speed. Adjust the system to the desired vehicle speed using the accelerator pedal.
When Driving
i-ACTIVSENSE
4-142
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

How to set the distance-between-vehicles during headway control
The distance-between-vehicles is set to a shorter distance by pressing the switch. The
distance-between-vehicles is set to a longer distance by pressi ng the
switch. The
distance-between-vehicles can be set to 4 levels; Long, medium, short, and extremely short
distance.
Distance-between-vehicles guide-
line
(at 80 km/h (50 mph) vehicle
speed) Indication on multi-information
display Indication on active driving dis-
play
*1
Long (about 50 m (164 ft))
Medium (about 40 m (131 ft))
Short (about 30 m (98 ft))
Extremely short (about 25 m (82 ft))
*1 Displays a pop-up image in the a ctive driving display only when the driver operates the switch.
NOTE
•The distance-between-vehicles differs depending on the vehicle speed, and the slower the
vehicle speed, the shorter the distance.
•When the ignition is switched to ACC or OFF and then the engine is started again, the
system automatically sets the distance-between-vehicles to the previous setting.
When Driving
i-ACTIVSENSE
4-143
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

How to change the set vehicle speed
To accelerate/decelerate using the SET
switch
When you press the SET
switch, the
vehicle accelerates and when you press the
SET
switch, it decelerates.
European
models Except Euro-
pean models
Short press 1 km/h (1 mph) 5 km/h (5 mph)
Long press 10 km/h (5 mph)
NOTE
For example, the set vehicle speed is
changed by pressing the SET switch four
times as follows:
(European models)
The vehicle speed accelerates or
decelerates by 4 km/h (4 mph).
(Except European models)
The vehicle speed accelerates or
decelerates by 20 km/h (20 mph).
To increase speed using accelerator
pedal
Depress the accelerator pedal and press
and release the SET
switch or SET
switch at the desired speed. If the switch is
not operated, the system returns to the set
speed after you release your foot from the
accelerator pedal.
CAUTION
The warnings and brake control do not
operate while the accelerator pedal is
depressed.
NOTE
•When accelerating using the SET
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. For the set vehicle speed, check
the set vehicle speed indication in the
display.
•When depressing the accelerator pedal,
the inter-vehicle distance indication in
the display changes to the white-line
indication.
•(European models)
When switching to a passing lane and
operating the direction indicator, the
system provides more acceleration
automatically if it determines that more
acceleration is required. Drive while
being careful of the road ahead because
you could approach the vehicle ahead
too closely.
Cancelling the system
When the following operations are
performed, the MRCC system is
cancelled, and the MRCC set indication
(green) switches to the MRCC main
indication (white) at the same time.
•The OFF/CAN switch is pressed.
•The brake pedal is depressed.
•The electric parkin g brake (EPB) is
applied.
•(Automatic transaxle)
The selector lever i s in the P (Park), N
(Neutral), or R (R everse) position.
•(Manual transaxle)
The shift lever is in the reverse (R)
position.
•Any of the doors is opened.
When Driving
i-ACTIVSENSE
4-144
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2