change NISSAN SENTRA 2006 B15 / 5.G Navigation Manual

Thank you for purchasing a NISSAN vehicle.
This user’s manual is for the navigation system
only. This manual contains operating instructions
for the NISSAN Navigation System offered in
your NISSAN vehicle.
Please read this manual carefully to ensure safe
operation of the navigation system.
.Because of possible specification changes
and optional equipment, sections of this
manual may not apply to your vehicle.
. All information, specifications and illustra-
tions in this manual are those in effect at the
time of printing. NISSAN reserves the right
to change specifications or design at any
time without notice.
. Do not remove this manual from the vehicle
when selling this vehicle. The next user of
this navigation system may need the manual.FOREWORD

NAI0402
CONTROL PANEL
Armada, Maxima, Murano, Pathfinder,
Quest, Titan&1<
> (DAY/NIGHT):
Push to switch between the day screen and
the night screen.
&2<BACK>/<PREV> :
Push to return to the previous screen. In a
settings screen, this button can also be used to apply the setting.
&3JOYSTICK and
<ENTER>:
Push to highlight an item on the screen,
select the highlighted item, move on the
map, etc.
&4<SETTING> :
Push to access the system settings.
&5<TRIP> :
Push to display the vehicle information.
Refer to the Owner’s Manual of your vehicle.
&6<DEST> :
Push to enter a destination. Various methods
for entering a destination are available.“4. Setting a destination”.
&7<ROUTE> :
Push to access guidance control functions
(guidance cancellation, route priority, way-
point setting on the route, etc.) .
&8<MAP>:
Push to display the current location map
screen.
&9<GUIDE VOICE> :
Push to repeat voice guidance for a guide
point.
&10
<
> (ZOOM IN/ZOOM OUT):
Push to switch to the zoom mode to change
the map scale.
Getting started
2-3

NAI0403
350Z&1<MAP>:
Push to display the current location map
screen.
&2<DEST>:
Push to enter a destination. Various methods
for entering a destination are available.“4. Setting a destination”.
&3<ROUTE> :
Push to access guidance control functions
(guidance cancellation, route priority, way-
point setting on the route, etc.) .
&4JOYSTICK and <ENTER>:
Push to highlight an item on the screen,
select the highlighted item, move on the
map, etc.
&5<INFO> :
Push to display the navigation information,
such as GPS and version information, etc.
&6<SETTING> :
Push to access the system settings.
&7<VOICE> :
Push to repeat voice guidance for a guide
point.
&8<ZOOM IN>/<ZOOM OUT> :
Push to switch to the zoom mode to change
the map scale.
&9<BACK> :
Push to return to the previous screen. In a
settings screen, this button can also be
used to apply the setting.
&10
<
> (DAY/NIGHT):
Push to switch between the day screen and
the night screen. Push and hold to toggle
the display on and off.
2-4
Getting started

NAV2703
3. Depending on the item you selected, adetailed menu screen, a character input
screen or a setting screen, etc. is displayed.
On the screen displayed, make adjustments,
input information, etc. accordingly.
NAV2704
4. Push <BACK>/
<PREV> to return to the
previous screen without applying any
changes.
Push <MAP>
to return to the current
location map screen without applying any
changes.
INFO:
Depending on the menu selected, pushing
<MAP> may not return you to the current
location map screen.
Getting started
2-9

NAI0407
USING CONTROLS TO ADJUST VA-
LUES, LEVELS, ETC.Use the joystick to adjust the volume of the voice
guidance and the display brightness.How to adjust1. Highlight the preferred setting item andpush <ENTER> . The color of the corre-
sponding adjustment item changes.
2. Use the joystick, and the value or bar indicating levels increases or decreases
accordingly.
3. Push <ENTER> or
<BACK> /
<PREV> to
apply the setting.
2-10
Getting started

NAI0409
CHANGING THE SCALE OF A MAPPush<ZOOM IN> (
)or
<ZOOM OUT>
(
) . A scale appears on the left side of the
screen.
To view the map in detail, push <ZOOM IN>
().
To view a wider area, push <ZOOM OUT>
().
The scale will automatically disappear when
neither <ZOOM IN> (
)nor<ZOOM
OUT> (
) has been pushed for several
seconds.
INFO:
Free zoom
Push and hold <ZOOM IN>(
)or
<ZOOM
OUT> (
) to change the map scale in
smaller steps (free zoom) . Once the free zoom
has been utilized, push <ZOOM IN>(
)or
<ZOOM OUT> (
) to change the map scale
in smaller steps.
2-20
Getting started

NAV2738
3. When approaching a guide point, thesystem automatically changes to the split
screen and shows an enlarged view of the
intersection in the left screen.
NAV2739
4. When arriving at the destination, routeguidance automatically ends.
Getting started
2-33

NAV2741
3. A confirmation message is displayed. High-light [Yes] and push <ENTER>.
INFO:
If a route is cancelled, [Cancel Route Guidance]
changes to [Resume Route Guidance].
Highlight [Resume Route Guidance] and push
<ENTER> to reactivate the cancelled route.
This is available only until a new route is set.
NAI0412
Delete the route using <CANCEL> (only
for 350Z)1. Push <CANCEL> .
NAV3024
2. A confirmation message is displayed. High-
light [Yes] and push <ENTER>.
Getting started
2-35

The map view can be changed between Plan
View and Birdview
TM. The map can also be
displayed in the split screen mode.
NAV2711
1. Push <ENTER> while the current location
map screen is displayed.
NAV2712
2. Highlight [Map View] and push <ENTER>
.
SWITCHING THE MAP VIEW3-4
Map settings

NAV2747
3. Highlight the preferred map view and push<ENTER> . The indicator of the selected
map view illuminates.
4. Push <MAP>to return to the current
location map screen.
AVAILABLE VIEWS. Plan View:
Switches to Plan View.
. Birdview
TM:
Switches to Birdview
TM.
. Split (Plan View):
Changes to the split screen mode and both
halves display maps in Plan View.
. Split (Birdview
TM):
Changes to the split screen mode and the
left half displays the map in Plan View and
the right half displays the map in Birdview
TM.
INFO:
. When you select a map view, a preview of
that view is displayed on the right side of the
screen.
. When you select [Split (Plan View)] or [Split
(Birdview
TM)], [Change Map Scale for Left]
becomes available. This is used to change
the scale of the map in the left screen.
“CHANGING THE SCALE OF THE
LEFT SCREEN” (page 3-20)
Map settings
3-5