NISSAN TEANA 2008 Service Manual

AV
AUDIO UNIT
AV-37
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
ON-VEHICLE REPAIR
AUDIO UNIT
Exploded ViewINFOID:0000000003765611
REMOVAL
Refer to IP-11, "Exploded View".
DISASSEMBLY
Removal and InstallationINFOID:0000000003765612
REMOVAL
1. Remove instrument finisher C. Refer to IP-12, "Removal and Installation".
2. Remove cluster lid D. Refer to IP-12, "
Removal and Installation".
3. Remove audio unit with an A/C auto amp. as a single unit from the body.
4. Remove bracket screws, and then remove audio unit.
INSTALLATION
Install in the reverse order of removal.
1. Audio unit 2. Bracket LH 3. A/C auto amp.
4. Bracket RH
JPNIA1027ZZ

AV-38
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
AUDIO DISPLAY
AUDIO DISPLAY
Exploded ViewINFOID:0000000003765613
Removal and InstallationINFOID:0000000003765614
REMOVAL
1. Remove cluster lid D. Refer to IP-12, "Removal and Installation".
2. Remove audio display unit and A/C display with bracket as a
single unit (1).
3. Remove bracket screws, and then remove audio display unit.
INSTALLATION
Install in the reverse order of removal.
1. Audio display unit 2. Front cover 3. A/C display
4. Bracket
JPNIA1028ZZ
JPNIA1029ZZ

AV
FRONT DOOR SPEAKER
AV-39
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
FRONT DOOR SPEAKER
Exploded ViewINFOID:0000000003765615
Removal and InstallationINFOID:0000000003765616
REMOVAL
1. Remove front door finisher. Refer to INT-30, "DRIVER SIDE : Removal and Installation" (driver side) or
INT-33, "
PASSENGER SIDE : Removal and Installation" (passenger side).
2. Remove front door speaker screws, then disconnect front door speaker connector and remove front door
speaker.
INSTALLATION
Install in the reverse order of removal.
JPNIA1030ZZ
1. Front door speaker

AV-40
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
REAR DOOR SPEAKER
REAR DOOR SPEAKER
Exploded ViewINFOID:0000000003765617
Removal and InstallationINFOID:0000000003765618
REMOVAL
1. Remove rear door finisher. Refer to INT-36, "Removal and Installation".
2. Remove rear door speaker screws, then disconnect rear door speaker connector and remove rear door
speaker.
INSTALLATION
Install in the reverse order of removal.
JPNIA1031ZZ
1. Rear door speaker

AV
FRONT SQUAWKER
AV-41
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
FRONT SQUAWKER
Exploded ViewINFOID:0000000003765619
Removal and InstallationINFOID:0000000003765620
REMOVAL
1. Remove speaker grille. Refer to IP-12, "Removal and Installation".
2. Remove front squawker screws, lift up the front squawker and disconnect front squawker connector. Then
remove the front squawker.
INSTALLATION
Install in the reverse order of removal.
JPNIA1038ZZ
1. Front squawker

AV-42
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
STEERING SWITCH
STEERING SWITCH
Exploded ViewINFOID:0000000003765621
Refer to ST-12, "Exploded View".
Removal and InstallationINFOID:0000000003765622
REMOVAL
Refer to ST-12, "Removal and Installation".
INSTALLATION
Install in the reverse order of removal.

AV
ANTENNA AMP.
AV-43
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
ANTENNA AMP.
Exploded ViewINFOID:0000000003765623
Removal and InstallationINFOID:0000000003765624
REMOVAL
1. Remove rear side pillar finisher. Refer to INT-39, "Removal and Installation".
2. Disconnect antenna feeder connector and clip.
3. Remove antenna amp. mounting nut, disconnect the antenna amp. connector.
4. Remove antenna amp.
INSTALLATION
Installation is the reverse order of removal.
JPNIA1032ZZ
1. AM-FM main connector
2. Antenna amp.

AV-44
< ON-VEHICLE REPAIR >[AUDIO SYSTEM]
ANTENNA FEEDER (RADIO)
ANTENNA FEEDER (RADIO)
Harness LayoutINFOID:0000000003765625
JSNIA1429GB

AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-45
< BASIC INSPECTION >[BASE AUDIO AND DISPLAY SYSTEM]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work FlowINFOID:0000000003882692
OVERALL SEQUENCE
 Reference 1··· Refer to AV-68, "CONSULT-III Function (MULTI AV)".
 Reference 2··· Refer to AV-126, "
DTC Index".
 Reference 3··· Refer to AV-164, "
Symptom Table".
DETAILED FLOW
1.INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
 Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred).
 Check the symptom.
Is the occurred symptom malfunction?
YES >> GO TO 2.
NO >> INSPECTION END
2.DIAGNOSIS WITH CONSULT-III
JSNIA0732GB

AV-46
< BASIC INSPECTION >[BASE AUDIO AND DISPLAY SYSTEM]
DIAGNOSIS AND REPAIR WORKFLOW
1. Connect CONSULT-III and perform a self-diagnosis for “MULTI AV”. Refer to AV-68, "CONSULT-III Func-
tion (MULTI AV)".
NOTE:
Skip to step 4 of the diagnosis procedure if “MULTI AV” is not displayed.
2. Check if any DTC is displayed in the self-diagnosis results.
Is DTC displayed?
YES >> GO TO 3.
NO >> GO TO 4.
3.TROUBLE DIAGNOSIS FOR DTC
1. Check the DTC indicated in the self-diagnosis results.
2. Perform the relevant diagnosis referring to the DTC Index. Refer to AV-126, "
DTC Index".
>> GO TO 5.
4.TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to AV-164, "
Symptom
Table".
>> GO TO 5.
5.ERROR PART REPAIR
1. Repair or replace the identified malfunctioning parts.
2. Perform a self-diagnosis for “MULTI AV” with CONSULT-III.
NOTE:
Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC
has been indicated in the self-diagnosis results.
3. Check that the symptom does not occur.
Does the symptom occur?
YES >> GO TO 1.
NO >> INSPECTION END