Peugeot 307 SW Dag 2002.5 Workshop Manual

Page 51 of 177

22-07-2002
COMPACT DISC : AUDIO RD3 Selecting CD modeAfter insertion of a disc, printed face upwards, the player starts automatically. If a disc is already inserted, press button Q.
Ejection of a disc Press button Sto eject the disc from the player.
Selecting a track Press buttonIto select the next track.
Press button Jto return to the start of the current track or to select the previous track.
Accelerated play Press and hold button Ior Jfor forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Shuffle (RDM)When the CD player is selected, press and hold button Q for two seconds.
The tracks will be played in random sequence. Pressing the button again for two seconds returns you to normal play.
Shuffle mode is de-activated each time the set is switched off.
YOUR 307 SW IN DETAIL 49
The use of copied compact discs may cause faults.
Insert circular compact discs only.

Page 52 of 177

22-07-2002
YOUR 307 SW IN DETAIL51
Stalk movement Function
1 - Press (behind) Increase volume.
2 - Press (behind) Decrease volume.
1 + 2 - Press together Switch off sound (mute); restore sound by pressing any button.
3 - Press Automatic search of upper frequencies (radio) - Selection of next track (CD/CD changer).
Continuous pressure until release: fast forwards (CD/CD changer).
4 - Press Automatic search of lower frequencies (radio) - Selection of next track (CD/CD changer).
Continuous pressure until release: rewind (CD/CD changer).
5 - Press end Change source (radio/CD/CD changer) - Confirmation of selection (on a menu or screen) -
Call connect/Call disconnect (Tel./incoming call - Call disconnect (Tel./Engaged).
Press for more than 2 seconds: display contextual menu (Tel./Not engaged).
6 - Rotation (clockwise) Selection of higher station stored in memory or storing in memory in position 1 for station not in
memory (radio) -- Selection of following CD Selection of following item (on a menu or screen).
7 - Rotation (anti-clockwise) Selection of lower station stored in memory or storing in memory in position 6 for station not in
memory (radio) -- Selection of previous CD Selection of following item (on a menu or screen).
AUDIO/TELEPHONE RT3

Page 53 of 177

22-07-2002
YOUR 307 SW IN DETAIL
52
Stalk movement Function
A
Ejection of CD.
B SOURCE Selection of source : radio, CD or CD changer. Press for more than 2 seconds : mute / cancel mute for current audio source being used
C Press : telephone on/off. Rotation : Adjusting the volume - Audio adjustment : bass, treble, loudness, fader (FR/RR balance), balance (L/R balance), automatic volume.
D Call connect (Tel/Incoming call) -
Display contextual menu (Tel/Not engaged).
E Access "PEUGEOT" services menu.Press for more than 2 seconds : call " PEUGEOT" breakdown direct.
F MODE Change display.Press for more than 2 seconds : display general information.
G Press : display contextual menu of display - Confirm inputting or adjustment - Cancel.
Rotation : move within a menu - Select function / parameter - Adjust.
H Adjust higher frequency, step by step or continuous (long press).Select previous CD (CD changer).
I Adjustlower frequency, step by step or continuous (long press).Select following CD (CD changer).
J ESC Cancel current operation.Press for more than 2 seconds : clear all superimposed displays and return to permanent application.
K Infra-red window*.
L SIM card cover.
M kkAutomatic search of higher frequency - Selection of following CD track.Double press : change to LO mode in DX mode.Press for more than 2 seconds : CD fast forward.

Page 54 of 177

22-07-2002
YOUR 307 SW IN DETAIL53
Stalk movement Function
N jjAutomatic search of lower frequency - Selection of previous CD track. Double press : change to LO mode in DX mode.Press for more than 2 seconds : CD rewind.
O DARK 1st press : display top band (remainder of screen is black) - 2nd press: brightness removed (black screen) - 3rd press: return to normal screen. Press for more than 5 seconds: reinitialisation of the system.
P MENU Display general menu - Press for more than 2 seconds : display help screen.
Q Disconnect.
R BAND Select FM1, FM2, FMast, AM wavebands.
AST Press for more than 2 seconds : automatic storing of stations (autostore).
S TA/PTY Traffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
T RDS RDS function on/off.
Press for more than 2 seconds : regional following mode on/off.
U AUDIO Display window for adjusting bass, treble, loudness, sound distribution and automatic correction of volume.
V SOS Press between 2 and 8 seconds : emergency call.
1 to 6 1 2 3 4 5 6 Select station in memory. Press more than 2 seconds : store station in memory while listening.
1 to 5 1 2 3 4 5 Selection of CDs in the CD changer.
0 to 9 * #0 1 2 3 4 5Alphanumeric keypad for entering text and telephone numbers.
6 7 8 9 * #
* During the year.

Page 55 of 177

22-07-2002
YOUR 307 SW IN DETAIL
54
GENERAL FUNCTIONS On/off With the ignition switch in the accessories position or with the ignition on, press button Cto switch the audio
function of the RT3 audio/telephone on or off. Note: in the absence of an ignition key, press button Cto switch the telematics system on or off.
The RT3 telephone can operate for 30 minutes without switching the vehicle ignition on.
Notes:
- the SIM card must be removed only after the audio/telephone has been switched off,
- following automatic switching off of the audio/telephone after 30 minutes it is possible to make a telephone call by pres- sing button D,
- after the ignition has been switched off, the audio/telephone can be switched on again by pressing buttons D, E , V or by
inserting a CD in the player.
Anti-theft system
The RT3 audio/telephone is coded in such a way that it can operate only on your vehicle. If fitting it to another vehicle, cons ult
your PEUGEOT dealer for configuration of the system. The system is automatic and requires no action on your part. ADJUSTING THE VOLUME
Turn button Cclockwise to increase the volume of the audio/telephone or anti-clockwise to decrease it.
Note: the volume setting is specific to each source. It is possible to have different settings for radio, CD or CD changer.
AUDIO SETTINGS Press button Uto access Bass, Treble , Loudness , Fader (front/rear balance), Balance(left/right balance)
and Automatic volume adjustment settings.
Exit from audio mode is automatic after a few seconds without any action, or by pressing button J.
Note: bass and treble settings are specific to each source. It is possible to have different settings for radio,
CD or CD changer.

Page 56 of 177

22-07-2002
YOUR 307 SW IN DETAIL
55
Bass setting When "Bass" is displayed, turn button Cto vary the setting.
- "-9" for minimum bass setting,
- "0" for normal setting,
- "+9" for maximum bass setting.
Treble setting When "Treble" is displayed, turn button Cto vary the setting.
- "-9" for minimum treble setting,
- "0" for normal setting,
- "+9" for maximum treble setting.
Adjusting the loudness
This function automatically emphasises bass and treble tones when the volume is low. Rotate button Cto switch the function on or off.
Setting the front/rear sound distribution (Fader) When "Fader" is displayed:
- Turn button Cclockwise to increase the volume in the front.
- Turn button Canti-clockwise to increase the volume in the rear.
Setting the right/left sound distribution (Balance)When "Balance" is displayed:
- Turn button Cclockwise to increase the volume on the right.
- Turn button Canti-clockwise to increase the volume on the left.
Automatic volume adjustment "CAV"This function allows the volume to be adjusted automatically depending on the level of noise produced by the speed of the vehicle. Press button Cto switch the function on or off.

Page 57 of 177

22-07-2002
YOUR 307 SW IN DETAIL
56
RADIO Notes on radio reception
Car radio/telephone receivers are subject to phenomena which do not affect domestic radio sets. Both MW/LW and FM are sub-
ject to various forms of interference. This is not a reflection on the quality of the equipment, but is due to the nature of the signalsand the way in which they are transmitted.
On MW/LW interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.
On FM, interference may be the result of the increasing distance from the transmitter, deflection of the signals by obstacles ( moun-
tains, hills, buildings etc.) or of being in an area which is not covered by a transmitter. Selecting the radio
Press"SOURCE" several times.
Selecting a waveband Briefly pressing button "BND/AST" to select the FM1, FM2 , FMast and AM wavebands.
Automatic station search Briefly press button Mor Nto search for the station immediately above or below.
The search stops at the first station found. If the TAtraffic programme is selected, only stations broadcasting this type of programme are
selected.
Searching for a station occurs first in "LO"sensitivity (selection of the most powerful transmitters) for scanning of the wave-
band, then in "DX"sensitivity (selection of the weaker and more distant transmitters).
To make a direct search in "DX"sensitivity, briefly press button Mor Ntwice.

Page 58 of 177

22-07-2002
YOUR 307 SW IN DETAIL57
Manual station search Briefly press button Hor Ito increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous searching of the frequency. Scrolling stops at the first station found as soon as the button is released.
Manual station search Select the station required. Press for more than two seconds on one of the buttons "1"to "6" .
An audible signal is emitted, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory
Press the ''BND/AST' ' button for more than two seconds.
Your audio/telephone automatically stores the 6 stations with the strongest signal in FM. These stations are stored in the FMast waveband.
If it is not possible to find 6 stations, the remaining memories are empty. Recalling stations stored in the memory For each waveband, briefly press the buttons "1"to "6" to recall the corresponding stored station.

Page 59 of 177

22-07-2002
YOUR 307 SW IN DETAIL
58
RDS SYSTEM Using the RDS (Radio Data System) function on FM Radio Data System allows you to continue to listen to the same station whatever the frequency it is using for the region you are going through. Switch the function on or off by pressing the "RDS"button briefly.
The multifunction screen will show: - RDS if the function is active,
- "(RDS)" if the function is active but not available.
RDS station following
This display indicates the name of the station selected. The audio/telephone is continuously searching for the station which has the best reception and which is transmitting the same programme.
Traffic information pprogramme Press the ''TA/PTY'' button to switch the function on or off.
The multifunction screen will show: - TA if the function is selected,
- "(TA)" if the function is selected but not available.
Any traffic information flash will be given priority, whatever source you are listening to (radio, CD or CD changer).If you wish to interrupt the broadcasting of a message, press the ''TA/PTY''button to switch the function off.
Note: the volume of the traffic information is independent of the volume of normal radio/telephone listening . You can
adjust it by using the volume button. The setting will be stored and will be used when the next messages are broadcast. Regional following mode (REG) When they are part of a network, certain stations broadcast regional programmes in the various areas they serve. With regional following mode you can keep listening to the same programme.
To do this, press the "RDS"button to switch the function on or off.

Page 60 of 177

22-07-2002
YOUR 307 SW IN DETAIL59
PTY function This allows you to listen to stations broadcasting a specific type of programme (news, culture, sport, rock etc.). When FM is selected, press button "TA/PTY"for more than two seconds to switch the function on or off.
To find a PTYprogramme:
- select the PTYbutton,
- turn button Gto scroll down the different types of programmes offered,
- when the programme of your choice is displayed press button Mor Nto carry out an automatic
search (after an automatic search the PTYfunction is switched off if no station has been found).
In PTY mode the different types of programmes can be stored in memory. To do this, press the preselection buttons "1"to
"6' ' for more than two seconds. Recalling the type of programme stored in the memory is by brief pressure on the corrres-
ponding button.
EON system
This system connects stations which are part of the same network. It enables traffic information or a PTYprogramme trans-
mitted by a station which is part of the same network as the station to which you are listening, to be broadcast. The service is available when you have selected the TAtraffic information programme or the PTYfunction.
Contextual menu The contextual menu allows you to access the following functions:- "Inputting a frequency"- "Display Radio text" to display information connected with the station being listened to.

Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60 61-70 71-80 81-90 91-100 ... 180 next >