auto AUDI S3 SEDAN 2018 Manual Online

u. 00 .-< N l'­ N .-< 0 N > 00
Intelligent Technology
-Press the accelerator pedal carefully when
accelerating on even, slippery surfaces such
as ice and snow. The drive wheels can spin
even when these control systems are instal­
led and this can affect dr iv in g stab ility and
increase the risk of a collision. condition. Different tire
sizes can lead to a
reduction in engine power.
- You may hear noises when the systems de­
scribed are working .
(D Tips
-The ABS and ASR only function correctly
when all four wheels have a s imilar wear
Switching on/off
ESC turns on automatically when you start the engine.
F ig. 153 Upper center console: ESC button
function of the ESC is limited or switched off. The
amount of stabilization contro l wi ll differ de­
pending on the level.
The following examp les are unusua l situations
where it may make sense to switch sport mode on in order to allow the wheels to spin:
- Rocking the vehicle to free it when it is stuck
- Dr iving in deep snow o r on loose g round
- Dr iving with snow chains
The ESC is designed to function in levels. Depend­
ing on the level that is selected , the stabilization
Sport mode on
Behavior
The ESC and ASR stab iliza-
tion functions are limited
~ &..
Operating Press the 11> .. , I button brief-
ly .
Indicator II turns on.
lights
Messages* Stabilization control (ESC):
sport. Warning! Restricted
stability
A WARNING
You should only switch sport mode on or switch ESC/ ASR
off if your driving abilities
and road conditions permit.
ESC/ASR off Sport mode off or
ESC/ASRon
The stabilization function is The full stabilization func-
not
avai lab le~ A . ESC and tion of the ESC and ASR is
ASR are switched off . availab le again.
Press and hold the
! 1> °',1 but- Press the 11> .. , I button again .
ton longer than three sec-
onds.
II and lfil•)~~* turn on. II turns off or II and
lfil•)~~ * turn off.
Stabilization control (ESC): Stabilization control
off. Warning! Limited sta- (ESC): on
bility
-
- The stabilization function is limited when
sport mode is switched on. The driving
wheels could spin and the vehicle could swerve, especially on slick or slippery road
surfaces .
149

u. 00 .-< N l'­ N .-< 0 N > 00
Brake booster
The brake booster amplifies the pressu re yo u ap­
p ly to the brake pedal. It only operates while the
engine is running or when the ignition is switched
on (plug-in hybrid drive*) .
A WARNING
- Only apply the brakes for the purpose of
cleaning the brake system when road and
traff ic conditions permit. You must not en­
danger other road users. This increases the
r isk of an accident .
-
-Never let the vehicle roll while the engine is
stopped because this increases the risk of an
acc ident.
- Depend ing on the veh icle equipment, the
brake pedal may be pulled downward when
the vehicle automatically initiates b rak ing.
- Never place objects in the driver's footwell.
An object could end up in the area around
the pedals and prevent you from using
them. You wo uld not be able to use the ped­
als if sudden driving or braking mane uvers
were needed, which increases the risk of an
accident.
- Only use floor mats that do not obstruct the
area around the pedals and that can be se­
curely fastened in the footwe lls.
- T o reduce the risk of injury, do not place
your foot under the brake pedal.
(Llj) Note
-Never let the brakes "rub" by pressing the
pedal lightly when braking is not actually
necessary. This causes the brakes to over­
heat and increases braking distance and
causes wear.
- Before driving on a long stretch with steep
slopes, reduce your speed and shift to the
next lower gear This makes use of the en­
gine braking effect and relieves the brakes.
If you need to brake add it ionally, brake in
i ntervals and not cont inuously.
Intelligent Technology
(D Tips
- If the brake booster is not working, you
must press the brake pedal with much more
force than normal.
- If you retrofit your vehicle with a front spoi l­
er, wheel covers or simi lar items, make sure
that the air flow to the front wheels is not
interrupted. Otherwise the brake system
can become too hot.
Electromechanical
steering
The electromechanical steering supports the
driver's steering movements.
Power steering adapts electronically based on
the ve hicle speed.
Indicator lights and messages
• Do not drive vehicle: steering defective
If this indicator light turns on and stays on and
th is message appears, the power steering may
have failed .
Stop the vehicle in a safe location as soon as pos­
s ible. Do
not cont inue driving. See an authorized
Audi dealer or authorized Audi Service Fac ility for
ass istance .
l;r-ij Steering: system fault! You can continue
driving
If the indicator light turns on, the steering wheel
may be more difficult to move or more sensitive
than usual. The steering whee l may also be at an
angle when driving straight.
Drive slowly to an authorized Audi dea ler or au­
thorized Audi Service Facility to have the mal­
function corrected.
(D Tips
If the. or 'Tij indicator light on ly stays on
for a short time, you may continue driving .
151

Intelligent Technology
All wheel drive (quattro)
Applies to: vehicles with all wheel drive
In oil wheel drive, oil four wheels ore powered.
General information
In all wheel drive, the driving power is divided be­
tween all four wheels. This happens automatical­
ly depending on your driving behavior as well as
the current road conditions. Also see
c:> page 148, Electronic Stabilization Control
(ESC) .
The a ll wheel drive concept is designed for high
engine power. Your vehicle is exceptionally pow­
erful and has excellent driving characteristics
both under normal driving conditions and on
snow and ice. Always read and follow safety pre­
cautions
c:> & .
Winter tires
By using all wheel drive, your vehicle has good
forward motion with standard tires in winter con­
ditions. However, using winter or all season tires
on
oil four wheels in the winter is recommended,
because this will improve the
broking effect.
Snow chains
If there are snow chain laws, snow chains must
also be used on vehicles with all wheel drive
c:> page 346, Snow chains.
Replacing tires
For vehicles with all wheel drive, only whee ls with
the same rolling circumference shou ld be used.
Avoid using tires with different tread depths
c:> page 33 7, New tires or wheels.
Offroad vehicle?
Your Audi is not an offroad vehicle -there is not
enough ground clearance. For this reason, avoid
difficult terrain.
A WARNING
-Also, in vehicles with a ll wheel drive, adapt
your driv ing style to the current road and
traff ic conditions. Do not let the increased
safety provided tempt you into taking risks,
152
because this increases the risk of an acci ­
dent.
- The braking ability of your vehicle is limited
to the traction of the whee ls. In this way, it
is not different from a two wheel drive vehi­
cle. Do not be tempted to accelerate to a high speed when the road is slippery, be­
cause this increases the risk of an accident.
- Note that on wet streets, the front wheels
can "hydroplane" if driv ing at speeds that
are too high . Unlike front wheel drive
vehicles, the engine does not rev higher sud­
denly when the vehicle begins hydrop laning .
Fo r this reason, adapt your speed to the
road conditions to reduce the risk of an acci­
dent.
Energy management
Your vehicle is equipped with an intelligent ener ­
gy management system for distributing electrici­
ty. Thi s significantly improves the starting ability
and increases the vehicle battery life.
(D Tips
-If you drive short distances frequently, the
vehicle battery may not charge enough
whi le driving. As a result, convenience func­
t ions for electrical equipment may be tem­
porarily unavailable.
- The vehicle battery w ill gradually drain if
the vehicle is not driven for long per iods of
t ime, or if electrical equipmen t is used
when the engine is not running. To ensure
that the vehicle can still be started, the
electrical equipment will be reduced or
switched off.
Notice about data
recorded by the Event
Data Recorder and
vehicle control modules
Event Data Recorder
This vehicle is equipped with an Event Data Re-
corder (EDR). The ma in purpose of an EDR is to
.,.

Multi Media Interface
Multi Media Interface
Traffic safety information
Aud i recommends performing certain Infotain­
ment system functions, such as entering a desti­
nation, only when the vehicle is stationary . Al ­
ways be prepared to stop operat ing the Infotain­
ment system in the interest of your safety and
the safety of other road users.
_& WARNING
Only use the Infotainment system when traf­
fic cond itions permit and always in a way that
allows you to maintain complete control over
your vehicle .
@ Tips
Certain functions are not available whi le driv­
ing .
Introduction
The Multi Media Interface , or MMI for short,
combines various systems for communication ,
navigation* and entertainment in your Audi. You
can operate the MMI using the MMI control pan­
el, the multifunction steering wheel or the voice
recognition system* .
Fig. 154 MMI control panel
MMI control panel overview
CD Control knob with joystick function*
....... .... ........... ...... 155, 159
@ MMI touch control pad* . . . . . . . . 157
® Left contro l button . . . . . . . . . . . . 156
@ R ight control b utton . . . . . . . . . . . 156
154
® Buttons for opening men us
directly ......... .. .......... .
® IMENUI button
0 I BACK I button .. . .. ...... .... .
MMI On/Off knob with
joystick function
Operating
Fig . 155 MMI On/Off knob w ith joystick function
Switching the MMI on /off : the MMI can be
switched on/off manually. 156
156
155
- Switching on manually : press the On/Off knob
CD briefly c:::> fig. 155 . Or: press the I MENU ! but­
ton@ c:::> page 154, fig. 154 or one of the but­
tons to open the menus directly ®·
-Switching off manually: press and hold the
O n/Off knob
CD c:::> fig. 155 until the MMI
switches off .
If the MMI has been switched off
manually, it does
not switch on again automati­
cally the next time the ignition is switched on.
Additional function s:
- Adjusting the volume:
turn the On/Off knob CD
c:::> fig. 155.
-Muting : press the On/Off knob CD c:::> fig. 155
briefly.
-Selecting the previous/next function (for ex­
ample , a radio station/track):
press the On/Off
knob
CD c:::> fig. 155 briefly toward the left l rig ht
l>l>i .
-Fast forwarding/rewinding (for example
songs) :
press and hold the On/Off knob CD
c:::> fig. 155 toward the left ll>i.

LL co .... N
" N .... 0 N > co
A WARNING
Adjust the volume of the audio system so that signals from outside the vehicle, such as po­
lice and fire sirens, can be heard easily at all
times.
@ Tips
The MMI switches off automatically if the en­
gine is not running and the vehicle battery is
low .
Infotainment system
display
Switching on /off
.,. Press the l c,J or C:,I button to switch the Info -
ta inment system on and off .
When the MMI is switched on and the display is
switched off, you can operate certain functions
using the On/Off knob with the MMI joystick
function
¢ page 154.
(D Tips
There may be delays when switching on the
display.
Multi Media Inte rface
MMI operation
Selecting and confirming a function
Fig. 156 Operating the control knob
Selecting and confirming a function in a
menu /list
.,. Selecting a function: turn the control knob@
¢ fig. 156 to the desired function (such as se­
lecting a frequency) .
.,. Confirming a selection: press the control knob
@¢fig.156.
Returning to functions at higher levels
.,. Press the !BACKI button (?) ¢page 154,
fig. 154 .
Opening the main menu /menu
Fig. 157 D iag ra m : main menu
155

LL co .... N
" N .... 0 N > co
Letter/number speller
Fig . 1 66 Diagram : letter/ num be r spelle r
You can ente r letters, numbers and symbo ls in
the MMI us ing the letter/number speller. Th is
option is ava ilab le when the input f ield @is ac­
tive
r::!> fig . 166 .
-Opening /clos ing the letter /number speller :
move the control knob up/down when the input
field is active .
Or: select t he right contro l but ­
ton
> Open speller /Close speller .
- Entering characters :
turn the control knob with
t h e character
selection @¢ fig. 166 to the de­
s ir ed symbo l. Press the contro l knob to confi rm
t h e cha racte r. Yo ur inpu t is disp laye d in th e in­
pu t field @. On ce yo u have entered all of the
ch aracters, sele ct an d confirm t he
button (!) to
go to the res ults list.
Or : push the control knob
down.
- Entering accented characters (such as a, c;, ii,
o )* : turn t he con trol k nob wit h the c haracter
se lection @¢ fig. 16 6 to a character . To open
the selected accented cha racters, press and
hold the cont rol knob . Turn the cont rol knob
with the characte r
selection@¢ fig. 166 to an
accented cha racter . Press the control knob to
i nsert the acce nted character . To close the ac­
cented cha racters without se lecting a charac­
te r, p res s and hold the cont rol k nob ag ain.
Or:
sele ct and confir m la ou l(z) r::!> fig . 166. Select
and confirm an accented chara cter.
- Deleting character s: se lect and confirm <8J @
r::!> fig . 166 and press the con trol b utton . T o de-
Multi Media Inte rface
lete a ll characters in the input field, press and
hold the control knob on
in the input field are deleted .
-Enter ing special characters : select and con­
firm
! !&? l@ r::!>fig. 166, laou l(z) o rl 123 1@ . Se­
lect and confirm t he des ired specia l character
(for examp le, a hyphe n or pe riod) wi th the
number spe ller .
-Input assistance : in some cases s uch as in navi­
gation *, there is a word suggestion* @
r::!> fig. 166 based on ava ila ble e ntries while you
a re ente ring d ata. Yo u can sele ct this sugges­
t ion by p ushi ng the con tro l knob upward.
- Results list : in some cases, such as in the dire c­
t o ry, t he sys tem sw itches au to ma tically to the
res ults list b ased on available en tries ®
r::!> fig. 166. Select and conf irm a suggestion
from the list.
Re quire ment: the inpu t
field @r::!> fig. 166 must
be a ctive .
-Switching between speller and MMI touch* :
the handwriting recognition for the MMI touch
cont rol pad* is activated automatically. Simp ly
start wr it in g.
Overview of symbols in the speller
The symbo ls in the letter/numbe r speller are ex-
plained in the follow ing tab le:
llJ,
161

Multi Media Int erface
Symbol /Description Description
CD IL IST lorB Switches to the results list.
@ Input field Disp lays the cur re nt input .
® Results lis t Displays a
list with suggestions based on the letters already en-
tered.
@
+
Sw itches from lowe r case to upper case let ters o r from upper case
to lowe r case le tters.
® E
Opens additional spe ller options, for example C los e speller and
Clear input field
® 11
& 71 Character sets and specia
l characters
0 laoul D isp lays accented cha racters (suc h as a,<;, ri, o) .
Switches from letter to number inp ut or from n umber to letter in -
® I1231/IABCI
put .
® Adds a space in the input field . ..........
@ Character selection Highlights t he se lected c haracter.
@ ..
Inserts the suggested word* when you p ush the contro l knob up .
@ <&] D eletes t he cha racter to the left o f the cursor .
(D Tips
Opening free text search
Accented c haracters are not available fo r ev­
ery let ter. .,. Select: IME NUI button> desired menu item
(such as Telephone ).
.,. Keep tu rn ing the cont rol knob to the left until
t he
free text sear ch inp ut fie ld CD ¢ fig. 167
appears . Or: push the con trol knob up to open
the input field
CD .
Free text search
Applies to: vehicles with free text search
Using the free text search, you can select the or ­
der that the search terms are entered in the in ­
put field .
Fig. 167 Example : free text search on telep hone
Free text sea rch is avai lab le in the Vehicle *, Ra­
dio *, Media* , Telephone *, Navigation *
and Audi
conne ct*
menus .
162
The handwr it ing recogni tion fo r th e M MI to uch
con tro l pad* is automatically activated. S imply
st ar t w rit ing.
Free text search for an entry
.,. Enter one or more searc h terms in any order in­
to the input field . The ind iv idual sea rch te rms
m ust be separated by spaces whe n ente ring.
An input suggestion to comp lete the entry* ®
¢fig . 167 is shown depe nding on the input . Ad­
dit ional entries that co nta in the entered sea rch
te rm are lis ted I n the resu lts
list @.
If the desired term is still not displayed, enter
additional letters until it is d isplayed .

LL co .... N
" N .... 0 N > co
be ale rted when there is an incomi ng call
during an active ca ll. The call options de­
pend on the cell p hone a nd se rvice provider.
You can obtain more information from your
cell phone service prov ider.
Navigation
Operation in the driver information system
Applies to: veh icles with multifunction steering wheel and
nav igation system
Requirement: the nav igat io n tab must be dis­
p layed.
If you have not started ro ute gu idance, a com­
pass w ill display in the d river i nfo rmat ion sys­
t em . The map is d isplayed in the Aud i virtua l
co ckpit* .
.. Press either the @! butto n or the le ft control
bu tton
r:;, page 14, depe nd ing on veh icle e quip­
m ent .
Depending on vehicle equipment, the following
functions may be availab le in the d river informa ­
tion system .
-Accessing last destinations : select and confirm
Last destinations> the desired destination.
-Accessing favorites *: select and confirm Favor­
ites >
the desired des tination.
Applies to: veh icles with analog instrument cluster
-Showing navigation when route guidance is
active :
sele ct and confir m Route guidance .
- Showing the compass when route guidance is
ina ctive :
select and co nfirm Compas s.
- Starting route guidance to the stored home
address :
if ne ce ss ary, fi rs t se lect and co nfi rm
Stop route guidance and then Favorites >
Home address.
- Can celing active route guidance :
select and
co nfirm
Cancel route guidance .
Applies to: vehicles with Audi virtual cockpit
-Start ing route gu idance to the stored home
address:
i f necessary, first se lect and confirm
Cancel route guidance a nd the n Favorites >
Home address .
- Canceling active route guidance :
select: right
co ntro l butto n
> Cancel route guidance.
Multifunction steering wheel
Additional settings
Appl ies to: veh icles w ith Audi virtual cockpit
-Select: r ight control button > desire d en try.
Depen ding on the vehicle equipment an d th e
funct ion s elec ted, the followi ng addit ional set­
t in gs may be possi ble:
- Map display c:> page 212 .
-Map colors c:>page 212.
- Map orientation c:> page 212.
-Automatic zoom c:> page 2 13 .
Navigation view with route guidance
started
Applies to: veh icles w ith navigation system and Audi virtua l
cockp it
Fig. 169 D ia gram: standa rd m ap when route g uidance is
act ive (Aud i v irtua l cockp it)
Requireme nt: a dest ina tion m ust be e ntered
r=;, page 201, ro ute guid ance m ust be st arted and
t h e navigation tab must be di splayed.
Depend ing o n the vehicle equipmen t and th ese ­
l e cte d view
r:;, page 1 4, the follow ing informa tion
will be di splayed in the driver i nfo rm at ion sy s­
tem:
@ Map content (such as po in ts of interest o r
t raff ic inform ation)
@ Current veh icle pos it ion
(@)
@ A bar g raph appears when there is an upcom­
ing turn . The fewer bars a re shown, the shorte r
t h e di stance is unt il the turn. If there is not a n
u pcoming turn, the distance to the destination/
stopover a nd th e calc ulate d arr iv al time is dis­
played in the right s peedometer.
@ Name of t he street where you are currently
driv ing
167

Voice recognition system
Function Say:
Starting route guidance with an ad-Navigate/ Navigate to private address / Navigate to business
dress card open address
Ent ering a new destination/stop- Enter address
> enter the desired address when prompted>
over when ro ut e gu idan ce is active confirm the new destination/stopover if prompted
Starting route guidance after enter- Start route guidance
ing a destination
Canceling current route guidance Cancel route guidance
Calculating alternat ive routes Calculate alternative routes
Entering a point of interest by se -Point of interest
> Change search area > category or subcote-
lecting a search area with guidance gory when prompted, for example
"restaurant"
from the system
Destination input categor ies Audi Service / Train station /Airport / Hotel / Hospital / Park-
ing / Rest area /Restaurant / Gas station
etc.
Search areas for entering points of Nearby/ Along the route / Near destination / Near stopover /
interest In new city/ In a new state/country
Entering an online destination * Online destination
(XV), for example "Online destination
"Lakeview Hotel""
Co rrect ing data input No I meant (XV)
Clos ing the full-screen command
Close
list
Requirement: you must be in the Navigation or
Map menu. You can say the fo llowing commands
for more settings in Navigation:
Function Say:
Genera l map options Map/ Day map / Night map / Automatically change map color
Map type 2D heading up map/ 2D north up map / 3D map / Destination
map / Overview map / Standard map* / Google Earth
map* albl
Showing the route list Route list
Showing the remaining distance/ Destination information
time when route guidance is active
Speed l imit prompt How fast can I drive here?
Setting voice guidance for active Voice guidance on
I Voice guidance off I Voice guidance short-
route guidance ened
I Voice guidance complete I Voice guidance traffic
Blocking a certain section on the Block route for (XV) meters/kilometers/yards/miles / Block
route next route / Avoid next section of route
a) P rov ider a t tim e of prin ting.
bl AUDI AG p rovides access to services fro m thir d party prov iders. Perm anent ava ilab ility cannot be guaranteed , because t hat
depends on the th ird party p rov ide r.
(D Tips
- Destinations may have to be spelled when
entered, depending on which region you are
174
in and wh ich menu language you have se­
lected.

Tele phone
button > Settings > left control button > MMI
s etting s
> Con nectio n man age r<::> page 244.
~ Se lect and confirm the desired ce ll phone from
the list of disp layed Bluetooth devices .
~ The MMI generates a PIN for the connect ion
setup
<::> fig . 173 .
~ Select and confirm Yes .
~ Enter the P IN for connecting on your ce ll
phone .
Or: whe n the PIN is d isplayed o n your
ce ll phone, co nfirm the PIN on yo ur cell phone
and in t he MMI. The time a llowed for entering
the P IN is limited to approximately 30 seconds.
~ Pay attention to any additiona l system prompts
displayed on your cell phone, for example if the
system should connect au tomatically in the fu­
ture . Depending on the cell phone, you may
have to confirm downloading the directory sep­
arately .
After connect ing succ essfully
After connecting successfully, information about
the connected profiles will appear. You can a lso
change the profiles la ter. Select:
! M ENUI button>
Settings > left control button > MMI settings >
Connection manager <::> page 244.
In addition, the cell phone contacts are automat­
ically loaded in the MMI directory. Th is process
can take several minutes, depend ing on the num ­
ber of contacts .
You can a lso make your connected cell phone the
default phone by select ing
S et as def ault tel e­
phone
i n the Conne ction m anager <::> page 246 .
@ Note
Always follow the information found in c::>il]) in
Wi-Fi hotspot on page 195.
(D Tips
- Making phone calls throug h the MMI is only
possib le using the
Handsfree Bluetooth pro­
file.
- You can apply additional settings to con­
nected mobile devices using the
Connection
manag er <::>
page 244 .
-You can also search for the MMI in your cell
phone us ing the Bluetooth device search.
17 8
-You on ly have to pair your device one time .
B luetooth devices that are already paired
automatically connect to the M MI when the
Bluetooth funct ion is switched on, they are
within range and the ignition is sw itched on.
The last connected cell phone is given first pr iority.
- Authoriz ing the MMI connect ion in your cell
phone w ill make automatic connection pos­
sible .
- Pay attention to any system prompts dis­
played on you r cell phone, for example if
the system should connect automatically in
the f uture. Depend ing o n the cell phone,
yo u may also need to download the di recto ­
ry and confirm a ccess to your text messages
separate ly .
- Whe n leav ing the veh icle, the Bluetooth
connect ion to the cell p hone will au tomati ­
cally disconnect. Depending on your cell
phone, phone calls in progress may be auto ­
matically redirected from the MMI to your
cell phone and you can continue the ca ll on
your phone.
- You can obtain more information from your cell phone service provider or from your cel l
phone user guide. For i nformation on us ing
the telephone, v is it www .aud iusa .com/
bluetooth or contact an a uthorized Audi
dea ler or author ized Audi Se rvice Facili ty.
- Applies to: vehicles without secondary
phone: Several cell phones can be paired to
the MMI, bu t only one cell p hone can be a c­
t ively connec ted to the MM I.
- Applies to: vehicles without secondary
phone: If a Bluetoo th device is a lready con ­
nected to the MMI, i t will be d isconnected
w hen anot her device connects to the MM I.