bulb BMW MOTORRAD G 650 XCHALLENGE 2007 Rider's Manual (in English)

BMW Motorrad auxiliary
stand ......................... 81
BMW Motorrad front-wheel
stand ......................... 82
Fuses........................ 84
Bulbs ......................... 86
Air filter . . . . . .................. 92
Jump starting . . .............. 95
Battery . . . . . .................. 96
Number-plate carrier . . ..... 100
9 Care . . . . . ................ 103
Care products . . ............ 104
Washing motorcycle . . . ..... 104
Cleaning easily damaged
components ................ 104
Paint care . . ................ 105
Protective wax coating ..... 106
Laying up motorcycle . ..... 106
Restoring motorcycle to
use......................... 106
10 Technical data . . . . . . . 107
Troubleshooting chart . ..... 108
Threaded fasteners . . . ..... 109
Engine . . . . . ................ 110
Fuel . ....................... 111Engine oil . . ................ 111
Clutch...................... 112
Transmission............... 112
Rear-wheel drive........... 113
Running gear............... 113
Brakes . . . . . ................ 114
Wheels and tyres........... 115
Electrics . . . . ................ 117
Frame...................... 118
Dimensions ................ 119
Weights . . . . ................ 119
Riding specifications . . ..... 120
11 Service . . . . . . . . . . . . . . . . 121
BMW Motorrad service ..... 122
BMW Motorrad service
quality...................... 122
BMW Motorrad Service
Card: on-the-spot break-
down assistance........... 122
BMW Motorrad service net-
work . ....................... 123
Maintenance work . . . . . ..... 123
Confirmation of mainten-
ance work . . ................ 124
Confirmation of service ..... 129

Maintenance
Maintenance
Notes................................ 64
Toolkit . . ............................. 64
Engine oil............................ 65
Brake system ........................ 67
Brake pads . . ........................ 68
Brake fluid........................... 69
Coolant . ............................. 71
Clutch . . ............................. 72
Tyres................................ 73
Rims................................. 73
Chain................................ 73
Wheels . ............................. 75
BMW Motorrad auxiliary stand....... 81
BMW Motorrad front-wheel
stand................................ 82Fuses . . .............................. 84
Bulbs . . .............................. 86
Air filter .............................. 92
Jump starting ........................ 95
Battery . .............................. 96
Number-plate carrier............... 100
863zMaintenance

NotesThe Maintenance chapter de-
scribes straightforward proced-
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your motorcycle are listed
in the section entitled "Technical
data".
You will find information on more
extensive maintenance and re-
pair work in the Repair Manual
on DVD/CD-ROM (RepROM) for
your motorcycle, which is avail-
able from your authorised BMW
Motorrad dealer.
Some of the work calls for spe-
cial tools and a thorough know-
ledge of motorcycles. If you
are in doubt consult a specialist
workshop, preferably your author-
ised BMW Motorrad dealer.
ToolkitStandard on-board toolkit1 Fuse puller
Replacing fuses
2 Open-ended spanner, w/f
8/10
Adjusting chain tension
3 Open-ended spanner, w/f
19
Adjusting mirror arm
4 Open-ended spanner, w/f
19
Adjusting mirror arm5 Screwdriver handle
Holder for screwdriver blade9
6 3 mm Allen key
Replacing headlight bulb
7 4 mm Allen key
Removing and installing body
panels
8 6 mm Allen key
Adjusting headlight beam throw
9 Screwdriver blade
Star-head and flat-tip blade
Adjusting rear suspension
damping
864zMaintenance

10 Screwdriver, small
Replacing turn indicator bulbsOn-board toolkit service
kitYour authorised BMW Motor-
rad dealer can provide the on-
board toolkit service kit that you
will need if you are considering
undertaking more extensive work.
You will find information on un-
dertaking work of this nature in
the Repair Manual on the CD or
DVD also obtainable from your
authorised BMW Motorrad deal-
er.1 Extending tool holder
Adapters to accommodate all
tools
Removing and installing spark
plugs
2 1/4" bits
Star-head
Plain-tip
Adapter, 1/4" hex to 1/4"square
2x hexagon socket wrench in-
sert
Allen keys, 3 mm, 4 mm and
6mm3 Ring spanner, w/f 26
Removing and installing wheels
4 Electric torch
LED bulb
5 3x socket
Adjusting chain tension
6 Adapter
Adapter for 1/4" bits
9x12 mm and 3/8" swivel ad-
apters
Engine oilChecking engine oil level
The engine can seize if the
oil level is low, and this can
lead to accidents.
Always make sure that the oil
level is correct.
The oil level varies with the
temperature of the oil. The
higher the temperature, the high-
er the level of oil in the sump.
865zMaintenance

BulbsNotes
A defective bulb places
your safety at risk because
it is easier for other users to
oversee the motorcycle.
Replace defective bulbs as
soon as possible; always carry a
complete set of spare bulbs if
possible.
The bulb is pressurised and
can cause injury if dam-
aged.
Wear protective goggles and
gloves when changing bulbs.
The types of bulb fitted to
your motorcycle are listed
in the section entitled "Technical
data".
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil andgrease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Removing headlight
housing
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.Remove two screws1.
Ease the headlight housing for-
ward and up to remove.
Replacing low-beam and
high-beam headlight bulbSwitch off the ignition.
Remove the headlight housing
( 86)
886zMaintenance

Disconnect plug1.
Remove rubber cap2.Disengage spring clip3from
the latches and swing it up.
Remove bulb4.
Replace the defective bulb.Bulb for low-beam and
high-beam headlight
H4 / 12 V / 55...60 W
Install bulb4.
887zMaintenance

Replacing parking-light
bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove the headlight housing
( 86)Pull bulb socket1out of the
headlight housing.
Pull bulb2out of socket3.
Replace the defective bulb.Bulb for parking light
W5W / 12 V / 5 W
Insert bulb2into socket3.
889zMaintenance

Insert bulb socket1into the
headlight housing.
Install the headlight housing
( 88)Replacing turn indicator
bulbs, front and rear
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw1.Pull the glass out of the reflect-
or housing at the threaded-
fastener side.
Turn bulb2counter-clockwise
and remove it from the bulb
housing.
890zMaintenance

Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Turn bulb2clockwise to install
it in the bulb housing.Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
Install screw1.
LED rear lightThe rear light has to be replaced
if more than three of the LEDs
in the array fail. Under these cir-
cumstances consult a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.Replacing number-plate
light bulbs
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
891zMaintenance

Pull bulb holder1out of the
light carrier.
Pull bulb2out of socket3.
Replace the defective bulb.Bulb for number-plate
light
W5W/12V/5W
Insert bulb2into socket3.Seat bulb holder1in the light
carrier.
Air filterReplacing air-filter
element
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
motorcycle is stable and firmly
supported.
892zMaintenance