load capacity BMW MOTORRAD G 650 XCHALLENGE 2007 Rider's Manual (in English)

Seat the side panels in hold-
ers4.
Install screws3.
Install screws2on left and
right.with OE BMW Motorrad ABS:
Tighten screw1of the brake-
pipe distributor.
Install the seat ( 42)
Jump starting
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the on-board socketto jump-start the engine of the
motorcycle.
Touching live parts of the
ignition system with the
engine running can cause electric
shock.
Do not touch parts of the igni-
tion system when the engine is
running.
A short-circuit can res-
ult if the crocodile clips
of the jump leads are accident-
ally brought into contact with the
motorcycle.
Use only jump leads fitted with
fully insulated crocodile clips at
both ends.
Jump-starting with a donor-
battery voltage higher than
12 V can damage the vehicle
electronics.
Make sure that the battery of the
donor vehicle has a voltage rating
of 12 V.
895zMaintenance