maintenance BMW MOTORRAD R 1100 S 2002 Rider's Manual (in English)

BMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
InstructionsBMW Motorrad
On-board
documentation
consisting of
Rider's Manual
and Maintenance
Instructions
Rider's Manual
R 1100 S
10sbkg6.bk.fm Seite 85 Montag, 23. Januar 2006 4:27 16

11
4
General information and controls
146
149
23857
10131211
1Reservoir for clutch fluid
(
b 37)
2 Front suspension strut,
shock absorber adjustment (
b 40)
3 Fuel filler cap (
b 24)
4 Engine oil level sight glass
(
b 23)
5 Engine oil filler (
b 23)
6 Helmet holder
7 Dualseat cover
OE
(
b 13, 14)
8 Dualseat lock (
b 15) 9
Lifting handle (
b 54-55)
10 Rear suspension strut,shock absorber
adjustment (
b 41)
11 Main (centre) standOE
12Primary spark plug, left
13 Secondary spark plug, left
14 Fuse box, left
(
b Maintenance Instruc-
tions, Chapter 2)
( ) Figures in brackets bpage number for
description
OEOptional extra
General view, left side
10sbkg6.bk.fm Seite 4 Montag, 23. Januar 2006 4:27 16

11
5
General information and controls
25
171615
23181920212224
15Storage compartment for
– Toolkit (
b 15)
– Printed information (
b 15)
16 Helmet holder
17 Brake fluid reservoir for front
brake (
b 31, 35)
18 Fuse box, right for optional extras
(
b Maintenance Instruc-
tions, Chapter 2)
19 Primary spark plug, right
20 Secondary spark plug, right
OAOptional accessories
21Type plate
22 Vehicle identification number
23 Power socket
OA, 12 V
Provision for connecting addi-
tional equipment –
with fuse, 15 A
24 Rear suspension strut, spring
preload (
b 42)
25 Brake fluid reservoir for rear
brake (
b 32, 36)
( ) Figures in brackets bpage number for
description
General view, right side
10sbkg6.bk.fm Seite 5 Montag, 23. Januar 2006 4:27 16

2
20
Safety check
2
Use the safety checklist –
before every journey
Please perform the safety
check accurately. If your motor-
cycle needs any routine mainte-
nance, you can then attend to it
before the journey starts
(
b Maintenance Instructions),
or preferably, have it carried out
by your authorised BMW motor-
cycle dealer. This is to ensure
that your motorcycle corre-
sponds with road-vehicle use
and safety laws. Your vehicle must be in perfect
technical order: this is a basic
prerequisite for your safety and
that of other road users.
Checklist
10sbkg6.bk.fm Seite 20 Montag, 23. Januar 2006 4:27 16

2
29
Safety check
Brake system - general
d Warning:
Have the brake pads replaced
before they wear to the mini-
mum permissible thickness:
have the work performed by
a specialist workshop,
preferably an authorised
BMW motorcycle dealer.
Checking brake pads
Brake pad wear depends on
your personal style of riding.
To ensure reliable operation of
the brakes: do not allow lining
thickness to fall below minimum
value (
b Maintenance Instruc-
tions, Chapter 2)!
10sbkg6.bk.fm Seite 29 Montag, 23. Januar 2006 4:27 16

2
30
Safety check
2
Brake system - without BMW Integral ABS
Checking brake fluid level Gradual wear of the brake pads
causes the brake fluid level in
the reservoir to drop.
d Warning:
If brake fluid level in the fluid
reservoirs for the front or rear
brakes has dropped below
the MIN mark (
b 31-32) have
the brake system checked
without delay, preferably an
authorised BMW motorcycle
dealer.
Changing brake fluid
d Warning:
Brake fluid is subject to
severe thermal loads and
absorbs moisture from the
atmosphere.
Consequently, the brake fluid
must be changed regularly
(
b Maintenance Instructions,
Chapter 1) by a specialist
workshop, preferably an au-
thorised BMW motorcycle
dealer.
10sbkg6.bk.fm Seite 30 Montag, 23. Januar 2006 4:27 16

2
33
Safety check
Brake system - with BMW Integral ABSOE
Checking brake fluid level
d Warning:
On a motorcycle equipped
with BMW Integral ABS, the
brake fluid level in the reser-
voir does NOT drop as the
brake pads wear (b 35, 36).
d Warning:
Have the brake system
checked immediately by a
specialist workshop, prefera-
bly an authorised BMW mo-
torcycle dealer, if the brake
fluid level in the reservoir of
the brake system drops below
the MIN mark (b 35, 36).
OE Optional extra
Changing brake fluid
d Warning:
Brake fluid is subject to
severe thermal loads and
absorbs moisture from the
atmosphere.
Consequently, the brake fluid
must be changed regularly
(see the Maintenance Instruc-
tions
b Chapter 1) by a spe-
cialist workshop, preferably
an authorised
BMW motorcycle dealer.
10sbkg6.bk.fm Seite 33 Montag, 23. Januar 2006 4:27 16

2
38
Safety check
2
Checking lights
e Attention:
Check that all lights are operati-
onal at the start of each journey.
L Note:
If turn indicator repeater flashes
at twice the usual speed:
Defective flasher bulb.
BMW Integral ABS
OE:
General warning light ON (
b 62):
Check brake light or tail light.
If the tail light is defective the
brake light is dimmed and acts
as a tail light. When you apply the
brakes the brake light shines at
full brightness. To change bulbs in parking
lights, headlight (dipped and
main beams), rear/brake lights,
turn indicators and the number-
plate light:
(
b
Maintenance Instructions,
Chapter 2)
Headlight setting RHD/
LHD traffic
If the motorcycle is ridden in a
country where the opposite rule
of the road applies, its asym-
metric dipped beam will tend to
dazzle oncoming traffic.
Adjust the headlight according-
ly (
b Maintenance Instructions,
Chapter 2)
Your BMW motorcycle dealer
will be glad to provide any
assistance you may require.
OE Optional extra
Lights
10sbkg6.bk.fm Seite 38 Montag, 23. Januar 2006 4:27 16

3
59
Starting – Riding – Parking
Fully retracting the side
stand
L Note:
If the side stand is extended and a gear
engaged, you cannot start the motorcy-
cle.
Select neutral– Neutral indicator light 1 comes on
green
k (b 7).
L Note:
Engine does not start:
– Move the gear lever to the
k posi-
tion or disengage the clutch
Engine stops when first gear is
engaged:
– Fully retract the side stand; if neces- sary, consult the troubleshooting
table (
b Maintenance Instruc-
tions, Chapter 2)
Before you start
1
10sbkg6.bk.fm Seite 59 Montag, 23. Januar 2006 4:27 16

3
75
Starting – Riding – Parking
BMW Integral ABSOE - Fault table
OE Optional extra
General
warning
lighte ABS warning
light
l/
brake failure Malfunctions
OFF ON Only RESIDUAL BRAKING FUNCTION
available in both circuits (
b 71)
OFF Flashes at 1 Hz ABS not available Pull-away test not completed (
b 72)
OFF Flashes at 4 Hz Only RESIDUAL BRAKING FUNCTION
available in both circuits (
b 71)
Self-diagnosis not completed (b 72)
ON OFF Tail light/brake light defective
(Maintenance Instructions,
b Chapter 2)
ON Flashes at 1 Hz At least one brake circuit without ABS (
b 70)
ON Flashes at 4 Hz At least one brake circuit in RESIDUAL BRAKING FUNCTION mode (
b 71)
Alternate
flashing at
1Hz Alternate flash-
ing at 1 Hz
Fluid level in BMW Integral ABS too low.
Check the motorcycle as follows:
– Ignition OFF: is brake pressure OK at
the brake levers?
– Are the brakes acting on both wheels?
– Is the brake system leaktight, no signs of brake fluid escaping?
The brake system is defective if the test
outcome is negative.
Alternate
flashing at 4
Hz Alternate flas-
hing at 4 Hz
Fluid level in the BMW Integral ABS is too
low, perform the checks listed above.
Only RESIDUAL BRAKING FUNCTION
available in at least one circuit (
b 71)

d Warning:
Do not ride the motorcycle if you
have any doubts about the
dependability of the brake system.
10sbkg6.bk.fm Seite 75 Montag, 23. Januar 2006 4:27 16